Instructions for use
The appliance is ready for use when the plug is inserted into a socket. Adjust the
switch-settings (3 temperature settings, 2 speed settings) on the desired power level.
You can press the cold button for any of the heat and speed settings.
3m long cord with hang loop
①
Rear housing
②
Removable air filter
③
Anti-slip side bumpers
④
Front housing
⑤
Cool shot button
⑥
Three temperature setting button
⑦
Two air speed setting button
⑧
65 mm & 80 mm concentrator nozzles
⑨
Cleaning
Only clean the appliance when it is cold.
Remove the plug from the socket.
Clean the exterior with a slightly damp cloth.
Unscrew & clean the removable air filter regularly.
Regularly inspect the air inlet grill (located below removable air filter)
to see if it is dirty. If necessary: clean the air inlet grill with a suitable brush.
Do not allow water or other liquids onto or inside the appliance.
Safety precautions
Before using the hair dryer, make sure that the appliance’s plug conforms to that of the
socket. Basic precautions, including those listed below, must be followed when using
electrical appliances especially if there are children nearby.
Your hairdryer is a high performance product and the nozzles get hot when in use.
DO NOT place on a heat sensitive surface. Allow to cool before touching.
⑨
⑤
⑥
⑦
⑧
④
③
②
①
General specications
Voltage: 220 - 240V Frequency: 50/60Hz Accessories: 65 mm nozzle,
Wattage: 1800 - 2000W Weight: 19 oz/539 g 80 mm nozzle, storage bag