Solid
Surface
Collection
March 2007 ww w.oliverisinks.com
02
Oliveri Inspirational designs for your kitchen
Nothing compares to the beauty of a solid surface bench top. From the cool,
understated majesty of granite, through to the dramatic effect of a polished
Jarrah top, solid surfaces demand attention and create a focal point for your
kitchen. Oliveri have used their knowledge of international style to produce
a range of inspirational sinkware designs that takes full advantage of solid
surface bench tops. Designs range from the large capacity, extra-wide
04 Manhattan
America’s choice
06 Dallas
A family favourite
08 Monet Undermount
Style for the solid surface
10 Titan
Capacity with style
12 Compact Sinks
Traditional style undermounted
14 Solitaire
The versatile all-rounder
15 Accessories
Beyond a sink
16 Tapware
The perfect partner
18 Specifications & dimensions
Contents
MH886U shown with AC73 Stainless Steel Utility Tray supplied as standard.
Shown with optional extra MG513 Mixer Tap.
Manhattan and Dallas styles, to the more conventional Monet and bowl-only designs
that fit the standard 600mm bench top. Oliveri have also taken the practicality
of the solid surface bench top to a new level, with a range of genuine Oliveri
accessories that work with your Oliveri sink, even when it’s undermounted. Now
your solid bench top can also be transformed into a total food-processing centre.
If it’s not an Oliveri, it’s a compromise.
Included
Accessories
04
Manhattan America’s choice
Inspired by a country where they like their appliances a little bigger than the rest
of the world, Oliveri have recognised the need for extra size and have created an
extra capacity sink with an American style. The Superb Bowl is the largest in the
Oliveri range and is spacious enough to take just about any roasting dish, wok or
baking tray. When size matters, the only choice is Manhattan from Oliveri.
AC73 Stainless Utility Tray
Extend the versatility of your Manhattan sink.
Superb Bowl
One of the largest capacity bowls in the Oliveri
Range has the AC80 Bowl Protector included
as a standard accessory.
Satin Finish
The new MH882U, MH882-1, MH886-1
sinks, feature an attractive satin finish to
the drainer and rim.
AC71
Stainless Steel Drainer Basket
(MH885U /886U/8 86-1)
AC73
Stainless Steel Utility Tray
(MH885U /886U/8 86-1)
AC72
‘D’ Colander
(MH885U /886U/8 86-1)
AC74
Solid Timber preparation Board
(MH885U /886U/8 86-1)
AC14
Basket Waste
AC80
Bowl Protector
Features
Optional
Accessories
MH883U
MH88 4U
Maxi Bowl
(MH885U /6U )
This generous bowl
is designed with a
unique accessory
lip to cater for the
range of genuine
Oliveri Access ories.
½ Bowl
(MH883U/ 4U)
This traditional half-
sized bowl is still large
enough to be the
perfect partner for
the Superb Bowl.
18 Gauge
Stainless Steel
Nothing lasts as well
as stainless steel,
and your 18 gauge
(1.2mm) Oliveri sink
will endure many years
of daily use.
Basket Waste
No more lost plugs.
Push down to seal,
pull up to drain and
strain then remove to
empty. The Manhattan
is supplied standard
with basket wastes.
Extra Wide
Bench top
Size does make a
difference. The super
size of the Manhattan
requires a larger
720mm bench top.
(MH880U excluded)
MH886U shown with AC80 Bowl Protector suplied as
standard and MG513 Mixer Tap as an optional extra.
Oliveri Logo
The Oliveri signature
represents over 50 years
of world class sinkware
manufacture in
Australia. If it’s not an
Oliveri,
it’s a compromise.
MH885U
MH886U
AC82
Bowl Protector
(MH885U /886U/8 86-1)
MH88 0U
MH882U (satin finish)
MH882-1 (satin finish)
TOPMOUNT
MH886-1 (satin finish)
TOPMOUNT
Included
Accessories
06
Dallas A family favourite
Every kitchen has a few favourite items, such as a much loved roasting pan or
that special serving platter. We believe the Oliveri Dallas will be added to that
list. The huge ‘D’ shaped bowl is designed to fulfil the needs of a family and
ensures that this Oliveri sink will win a place in your kitchen too.
Undermount or Topmount
You choose the fitment that suits your lifestyle.
AC73 Stainless Utility Tray
Extend the versatility of your Dallas sink.
Gourmet Bowl
Extra Large bowl indulges your culinary creativity.
AC71
Stainles s Steel
Drainer Ba sket
AC73
Stainles s Steel
Utilit y Tray
AC72
‘D’ Colander
AC74
Solid Tim ber
Preparat ion Board
AC14
Basket Waste
AC81
Bowl Prote ctor
Features
Accessory Lip
The Maxi Bowl is
designed with a
unique accessory lip
to cater for a range
of genuine Oliveri
Accessories.
DA833U
DA834U
DA833-1 (satin finish)
DA834-1 (satin finish)
DA834-1 shown with MG513 Mixer Tap as an optional extra.
18 Gauge
Stainless Steel
Nothing lasts as well
as stainless steel,
and your 18 gauge
(1.2mm) Oliveri sink
will endure many years
of daily use.
Basket Waste
No more lost plugs.
Push down to seal,
pull up to drain and
strain then remove to
empty. The Dallas is
supplied standard
with basket wastes.
Extra Wide
Bench Top
Size does make a
difference. The super
size of the Dallas
requires a larger
720mm bench top.
Oliveri Logo
The Oliveri signature
represents over 50 years
of world class sinkware
manufacture in
Australia. If it’s not an
Oliveri,
it’s a compromise.
Optional
Accessories
AC82
Bowl Prote ctor
TOPMOUNTTOPMOUNT
MH882-1 (Shown with AC80 & optional MG513 Mixer)
Oliveri in the laundry
The large capacity of Manhattan and
Dallas make them a stylish alternative
for the laundry.
08
Undermount Style for the solid surface
The Monet Undermount collection of stainless steel sinks have been designed
to fit a standard 600mm solid surface bench top without compromising
Oliveri’s legendary style and practicality. The intelligent design and range of
genuine Oliveri accessories allows you to enjoy all the benefits of a smoothsurface bench top combined with the sophistication of an Oliveri sink.
Monet
Undermount
AC73 Stainless Utility Tray
Extend the versatility of your Monet sink.
Accessory Lip
Suits Oliveri’s custom designed accessories.
The Perfect Fit
Undermounts into a standard 600mm bench top.
AC73
Stainless Steel Utility Tray
(MO70U, MO71U, MO72U)
AC74
Solid Timber Preparation Board
(MO70U, MO71U, MO72U)
AC72
‘D’ Colander
(MO70U, MO71U, MO72U)
AC14
Basket Waste
600mm
Included
Accessories
MO70U (Shown with AC72,AC74, AC73 & optional PS113/1)
Tap Landing
The mixer tap is only
mounted through
the solid area of
the bench top. This
makes the tap easier
to install and more
stable when fitted.
Bridge
The bowls of the
Oliveri Undermount
Collection are joined
by a solid supporting
bridge. This means
there are no weak
areas between bowls.
Off Centre Outlets
Oliveri designers
have placed the drain
outlets towards the
rear of the bowl to
give you the maximum
amount of useable
space below the sink.
18/10 Stainless Steel
Oliveri sinks are manufactured from genuine
18/10, 304 grade stainless
steel, for optimum
hygiene and durability.
AC71
Stainless Steel
Drainer Basket
Oliveri Logo
The Oliveri signature
represents over 50 years
of world class sinkware
manufacture in
Australia. If it’s not an
Oliveri,
it’s a compromise.
MO70U shown with PS113/1 Mixer Tap as an optional extra.
Optional
Accessories
Features
AC82
Bowl Protector (MO 450U)
MO70U
MO71U
MO72U
MO450U (Alternative Installation Shown)
AC73
Stainless Steel Utility Tray
(MO450U )
AC74
Solid Timber Preparation
Board (MO450U)
AC72
‘D’ Colander (MO450U )
Included
Accessories
Titan Capacity with style
If you enjoy entertaining, cooking for a group or just experimenting at home,
you’ll find the Titan makes cleaning up a breeze. With an impressive 65 litre
capacity, it is big enough to handle the largest roasting pan, tray or wok. Its
square lines enhance the minimalist designs of today’s modern kitchens and it
is designed to be undermounted in a standard 600mm solid surface benchtop.
AC89
Stainless Steel
Bowl Protector
AC14
Basket Waste
10
Optional
Accessories
Twice the space
The extra wide, deep bowl allows you
to fully immerse baking trays and pans.
Choose a partner
For the ultimate in practicality and
versatility, the Oliveri 890U can be
partnered with a secondary bowl.
TN890U
TN890U (left) part nered with PE350 U (right)
TN890U (left) part nered with MO455U (right)
TN890U shown with AC89 Stainless Steel Bowl Protector and MV617/6 Mixer Tap as an optional extra.
AC16
Benchtop Drainer Tray
AC15
Timber Preparation Board
(PE350U )
AC18
‘D’ Colander (PE350U )
18 Gauge
Stainless Steel
Nothing lasts as well as stainless
steel, and your 18 gauge (1.2mm)
Oliveri sink will endure many years
of daily use. (TN890U )
Individual Traditional styles undermounted
Compact
Sinks
Oliveri have an impressive range of single and double bowl sinks in variety of
sizes to suit the kitchen designer in us all. These models offer a contemporary
take on the traditional shape. Designed for undermounting, they fit into
standard 600mm solid surface benchtops.
AC14
Basket Waste
Included
Accessories
12
AC01
Solid Timber Preparation
Board (DU430 U)
AC16
Benchtop D rainer Tray
AC03
Stainless Steel Drainer Basket
(PE30U /350U,DU430U)
DU490 U
NP650U (left) is partnered with PE350U (right) and shown with MG513 Mixer Tap as an optional extra.
AC02
¾ Bowl Colander (DU485U )
DU490 U (left) partnered with DU43 0U (right)
DU490 U (left) partnered with DU485U (right)
Optional
Accessories
PE30U
NP650 U
AC15
Timber Preparation Board
(PE350U )
AC18
‘D’ Colander (PE350U )
NP650 U (left) partnered with MO455U (right)
PE350U
PE350U (left) partnered with MO460U (right)
Solitaire The versatile all-rounder
14
For those who love the simplicity of round bowls, Solitaire offers a choice of
sinks that combine beauty and functionality. These single and double bowl
sinks will enhance your solid surface and even offer a choice of installations
to suit individual tastes. The custom designed accessories equip these sinks
to assist in a variety of food preparation duties whist maximizing bench space.
Optional
Accessories
AC50
Solid Timber Preparation
Board
AC51
Stainles s Steel Drainer
Basket
Included
Accessories
AC53
Stainless Steel Utility Tray
(LR50U )
AC14
Basket Waste
LR50U -1TH shown with MV617/6 Mixer Tap as an optional extra.
LR510
LR510 X 2
LR510 X 2
with optional AC53
LR50U-1TH (tap mounted on sink)
LR50U-NTH (tap mounted through benchtop)
Accessory Lip
This ingenious feature allows
Oliveri accessories to be used even
when the sink is Undermounted.
The more you use your Oliveri sink the more you’ll enjoy its sophisticated and functional design.
The larger and deeper bowls make washing up easier and the impressive range of accessories
transform any Oliveri sink into a total food processing centre. For instance, take the solid timber
preparation board. In the morning you can use it for making sandwiches, at lunchtime it’s simply
perfect for preparing a salad, and when evening falls it even doubles as a stylish impromptu
cheese board. Just one of the quality accessories that make Oliveri more than just a sink.
Accessories Beyond a sink
Accessories suitable for
all sinks in the range
specified unless indic ated
by bowl size icon
See page 18 for bowl sizes.
AC16
Benchtop Drainer Tray
Protects your benchtop when
draining dishes or defrosting food.
All except
Solitaire
AC51
Stainless Steel Drainer Basket
Drain, rinse or stack. Can be used
inside the bowl or on the drainer.
Solitaire
Stainless Steel Drainer Basket
Drain, rinse or stack. Can be used
inside the bowl or on the drainer.
DU430U
PE Sinks
AC03
AC14
Basket Waste
Push down to seal, pull up to drain
and strain. Remove to empty.
All sinks
Stainless Steel Basin Protector
Protects the basin from scratching
and provides extra defrosting area.
Manhattan
AC80 AC81
Stainless Steel Basin Protector
Protects the basin from scratching
and provides extra defrosting area.
Dallas
Stainless Steel Basin Protector
Protects the basin from scratching
and provides extra defrosting area.
MH885U /6U
MH886-1
Dallas
AC82
AC50
Timber Preparation Board
The knife-friendly hardwood finish
has a unique cutaway design.
Solitaire
AC74
Timber Preparation Board
Fits into bowl to tip chopped
vegetables into the colander.
Dallas, Monet
MH885 /6
MH885U /6U
MH886-1
AC01
Timber Preparation Board
The knife-friendly hardwood
timber board fits over bowl.
DU430U
AC02
¾ Bowl Colander
The perfec t place to strain pasta or
rinse vegetables and fits into bowl.
DU430U
AC53
Stainless Steel Utility Tray
Extends the versatility of your
Solitaire by providing extra space.
Solitaire
AC71
Stainless Steel Drainer Basket
Drain, rinse or stack. Can be used
inside the bowl or on the drainer.
Dallas, Monet
MH885 /6
MH885U /6U
MH886-1
AC73
18/10 Stainless Utility Tray
Extends the versatility of your sink
by providing extra space.
Dallas, Monet
MH885 /6
MH885U /6U
MH886-1
AC72
‘D’ Colander
The perfec t place to strain pasta or
rinse vegetables and fits into bowl.
Dallas, Monet
MH885 /6
MH885U /6U
MH886-1
Stainless Steel Basin Protector
Protects the basin from scratching
and provides extra defrosting area.
Titan
AC89
AC15
Timber Preparation Board
Fits into bowl to tip chopped
vegetables into the colander.
PE350U
AC18
‘D’ Colander
The perfec t place to strain pasta or
rinse vegetables and fits into bowl.
PE350U
Oliveri tapware has been selected from the world’s finest manufacturers.
In order to wear the Oliveri signature it must be of the highest quality, elegant
in design and functional. The taps are carefully chosen to complement the
clean lines of your Oliveri sink while performing with the utmost reliability
when connected to a variety of hot and cold water systems.
Tapware The perfect partner
Versatile and practical
Rinse efficiently in spray
mode; reach effortlessly
with the extendable neck.
MV617/6 extendable spray head mixer
From washing vegetables to filling large pots, the Oliveri MV617/6
is a kitchen essential. This European made mixer tap features an
extendable shower head that delivers either spray or stream at the
flick of a button. It also includes a clever ‘soft opening’ device which
reduces splashes. Like all Oliveri tapware, it is of the highest quality,
elegant in design and functional, sourced from one of the world’s
finest manufacturers.
16
Oliveri mixer taps have a
WELS 3 star water efficiency
rating, 9.0 l/m.
PS113/1 single lever sink mixer
This timeless design incorporates a generous reach
swivelling spout with a handle that is smooth and
light to operate as well as being easy to keep clean.
Finished in bright chrome, this European-made
mixer tap is very much at home on any Oliveri sink.
The subtle Oliveri signature on the control handle
is your sign of quality.
MG513 mixer tap with gooseneck spout
This tall, elegant mixer tap has smooth curves to
accompany the modern design of the larger Oliveri
sinks. A generous spout height allows plenty of
room to get the biggest roasting dish underneath,
while the simple one-touch control lever responds
instantly to your command. This European-made
beauty will further enhance the finest Oliveri sinks.
Oliveri Tapware is only available from selected outlets
and is suitable for mains pressure water systems.
¾ Bowl
280 x 350 x 130mm de ep
MO455U
11 Litre Capacit y
Main Bowl
330 x 385 x 155mm deep
DU430U
17 Litre Capacity
¾ Bowl
270 x 330 x 155mm deep
DU485U
12 Litre Capacity
Large Capacity Bowl
330 x 400 x 180mm deep
PE Sinks
21 Litre Capacity
½ Bowl
215 x 350 x 130mm deep
MO / MH Sink s
9 Litre Capa city
Titan Bowl
710 x 405 x 255mm deep
TN Sinks
65 Litre Capa city
Round B owl
420 x 180mm dee p
LR Sinks
24 Litre Capacity
NP Bowl
380 x 420 x 200 mm deep
NP Sinks
30 Litre Capacity
Extra C apacity Bowl
350 x 420 x 180mm de ep
MO Sinks
24 Litre Capacity
45 Litre M ega Bowl
520 x 400 x 235m m deep
DU490 U
45 Litre Capa city
Specifications
& dimensions
Cut Out Sizes
Monet
MO70U
MO450U
MO72U
MO71U
LR50U-1TH
Solitaire
LR50U- NTH
LR510
Manhattan Dallas
DA833U
DA833-1
DA834U
DA834-1
TN890U
Titan
MO455U
Gourm et Bowl
375 x 485 x 255mm deep
DA Sinks
39 Litre Cap acity
Extra C apacity Bowl 2
350 x 420 x 180mm de ep
MH / DA / MO450 U Sinks
24 Litre Capacity
Super b Bowl
510 x 455 x 255mm deep
MH Sinks
48 Litre Capacity
Compact
DU490U
DU485U
DU430U
NP650U
PE350U
MH885U
MH886U
MH883U
MH884U
MH882U
MH882-1
MH886-1
MH880U
Sink Model Cut Out Size (mm) Shipping
Weight (kg)
Manhattan
MH880U Template supplied in carton 7.0
MH883U, MH884U Template supplied in carton 12.0
MH885U, MH886U Template supplied in carton 15.0
MH886-1 970 x 540mm 15.0
MH882U Template supplied in carton 14.0
MH882-1 970 x 540mm 14.0
Dallas
DA833U, DA834U Template supplied in carton 13.0
DA833-1, DA834-1 820 x 540mm 13.0
Monet
MO70U Template supplied in carton 8.0
MO71U, MO72U Template supplied in carton 7.0
MO450U Template supplied in carton 4.5
Sink Model Cut Out Size (mm) Shipping
Weight (kg)
Solitaire
LR510 466mm diam TOPMOUNT or 10.0
454mm diam UNDERMOUNT
LR50U -1TH
Template supplied in carton 4.0
LR50U -NT H
Template supplied in carton
Titan
TN890U Template supplied in carton 11.0
Compact
DU490U Template supplied in carton 9.0
DU430U Template supplied in carton 4.5
DU485U Template supplied in carton 4.0
NP650U Template supplied in carton 5.0
MO455U Template supplied in carton 2.0
PE30U Template supplied in carton 6.0
PE350U Template supplied in carton 4.5
MO460U Template supplied in carton 2.0
MO460U
PE30U
Wide Bench Tops
Minimum 720mm bench top
required for installation.
DA834U (Shown with AC73 and optional MG513 Mixer Tap)
MO70U (Shown with AC72, AC74, AC73 & optional PS113/1 Mixer Tap)
LR50U-1TH (Shown with AC53 and optional AC50 & MV617/6 Mixer Tap)
Available from
Individually
Inspected
Each Oliveri sink is indiv idually inspec ted
for quality of construction and finish.
Raw materials are sourced worldwide,
and must satisfy the highest standards
before being accepted into the
manufacturing process.
Tasman Sinkware currently pro duce
their sinks and tubs to “worl d standard”
best practice. The company is
Qualit y Endorsed and all produc ts
are manufactured to Standard ISO
9001-200 0, your guarantee of quality.
Current de signs reflect the most
modern and innovative st yles and
are craf ted to suit even the most
discerning homeowner.
Look for the brand
with the blue dot
World Class
Manufacturing
Over the years, the Oliveri signature has earned
it’s reputation as a mark of excellence in design,
function and durability. Overseas markets
have also been impressed by the qualit y and
innovative accessories that complement every
Oliveri sink. Export sales continue to grow,
further establishing Oliveri as one of the world’s
best stainless steel sinks.
The company began life as a general,
domes tic and metal fabr icator in 1948.
The founders pioneered the deep drawing
technology in Australia, creating seamless,
deep drawn stainless s teel bowls.
Tasman Sinkware will continue to develop
designs and styles suitable for any application
where the highest standards are d emanded.
Care &
Maintenance
Oliveri sinks are manufac tured from genuine
18/10, 30 4 grade stainless steel, for optimum
hygiene and durability. However, no stainless
steel sink was ever designed to do batt le
against hardened metal utensils or foo d
processor blades, without incurring at least a
few scratches.
The best prevention against scratching
is to exercise a lit tle ex tra care, or even
to use one of Oliveri’s accessory b askets
when washing cutlery and the like.
To maintain the shine on your Oliveri sink,
regular maintenance is recommended with
any of the easy to obtain, non-abrasive
stainless steel cleaners or metal polishes.
Genuine
Oliveri
Beware of imitations as no one can
match the quality and design of Oliveri
sinks and accessories.
The Oliveri signature embossed into the
stainless steel surface, as well as the
distinctive Australian styl e packaging,
ensures that your sink is a genuine Oliveri.
Contemporary
Collection
Contemporary
Design
Collection
Adelaide
(0 8) 83 48 64 4 4
Brisbane
(07) 3209 6679
Canberra
(02) 6 280 573 6
Darwin
(0 8) 89 47 2101
Hobart
(03) 6275 260 0
Melbourne
(03) 9587 1933
Perth
(0 8) 94 46 5711
Sydney
(02) 9 602 2322
Townsville
(07) 4775 4096
Wagga Wagga
(02) 6 922 8600
Head Office /
Export Enquiries
Tasman Sinkware Pty Ltd
ABN 12 007 551 886
PO Box 2141 Regency Park
SA 5942 Australia
Phone 61 8 834 8 6444
Fax 61 8 8348 6 495
Website w ww.oliverisinks.com
Email sinkware@ tasbuildpro.com.au
Australia
For more information call
1300 13 SINK (1300 13 7465) to
be connected directly to your
nearest brand or sales agent
(not a vailabl e from mo biles).
New Zealand*
Dux Industries Ltd
0800 FORDU X ( 0800 367 389 )
dux @ dux.co.nz
Singapore*
Sim Siang Choon Ltd
6266 6632
sims@ si msiang cho on.com
Hong Kong*
Deacon & Co Ltd
2369 6111
imp orts @dea con.com.hk
United Kingdom*
A.C.Toon Ltd
01246 22390 0
sal es @actoon.co.uk
Canada*
Aquabrass
(514) 381 4141
*Ranges, specifications and accessory
options may vary outside Australia
A division of F letcher Building
Tasman Sinkware North America*
1230 Rai lro ad Stre et,
Coro na, CA 92882
nor thameric a@o liv eri sin ks.com
® Registered trademark of Tasman Sinkware. Under
its policy of ongoing product development Tasman
Sinkware may from time to time change product
specification without notice. WARNING: Products in
this brochure and all literature pertaining to, are subject
to Intellectual Propert y Protection. All dimensions
given are approximate and should be checked
prior to installation. Product colour reproduction
is as near to actual as printing methods allow.
Oliveri’s range
of inset stainless
steel sinks.
TAS5 0879.3 Marc h 07
Loading...