Olitech OT-Basic Instruction Manual

1

Olitech OT-Basic Senior Phone

Instruction Manual

www.olitech.com.au

2

Contents

Security ............................................ 5

Get Started ....................................... 8

Assemblies ................................... 8

Specifications ............................... 9

Start to Use ...................................... 9

Install the SIM Card and Battery ... 9

Charge the Battery ..................... 12

Storage Card .............................. 15

Keys layout ................................ 17

Keys Description ........................ 18

Power-on and Power-off ............. 20

Standby ...................................... 21

Lock the Keypad ........................ 22

Dial and Receive a Call ................. 23

Dial a Call................................... 23

3

Receive a Call ............................ 25

Call History ................................. 26

FM ................................................... 27

Music player................................... 29

Calculator ....................................... 30

Alarm .............................................. 31

Calendar ......................................... 32

Phonebook ..................................... 32

Save a Number .......................... 32

Advanced Function .................... 33

SMS Function ................................ 34

Read a Message ........................ 34

Write a Message ........................ 36

Save sent messages: ................. 36

Settings .......................................... 37

Time Settings ............................. 39

4

Security Settings ........................ 40

Recovery Factory Settings ......... 42

USB Data Cable ............................. 42

Icons ................................ ............... 44

Basic Icons ................................. 44

Profile Icons ............................... 44

5

Security

To ensure that you can use your
mobile phone safely and effectively,
read the following information carefully
before you use phone.

Safe Power-on

6

Do not use phone in places where
mobile phones are forbidden, or may
cause interferences or dangers.

Traffic Safety First

Do not use phone while you drive.

Shut-down in Restricted Areas

Comply with related restriction rules or
regulations. Shut down the mobile
phone on the airplane, or around
inflammable articles, chemicals, or
medical appliances.

Interference

Mobile communication may be

7

affected by radio interferences, so the
performance of phone is affected
accordingly.

Waterproof

This mobile phone is not waterproof.
Keep it dry under any situation.

Keep the Mobile Phone Out of
Reach of Children

Phone and all its assemblies should be
kept out of reach of children.

Assemblies and Batteries

Please use the company designated
the battery and charger, Failure to

8

comply with this rule may result in
explosion of the mobile phone.

Professional Service

Do not dissemble the mobile phone
and its assemblies by yourself. The
mobile phone is serviced only by
authorized organizations.

Get Started
Assemblies

When you open the phone packing box,
make sure that the accessories are
intact. If any of them is missing,

9

contact the local distributor.

Specifications

 Dimensions: 111.65 mm (height) *

50.2 mm (width) * 14.3 mm (depth)

 Battery capacity: 1000 mAh
 Standby duration: 200 h
 Call duration: 4 h

Note: The call duration is related to
the specific network situations.

Start to Use
Install the SIM Card and Battery

Before you remove the battery, make
sure that phone is powered off and

10

disconnected from the charger.
Perform the steps below to install the
SIM card:
1 Take off the battery cover.

2 Take out the battery.

11

3 According to the illustration on

phone, install the SIM card into the
corresponding groove.

12

4 Install the battery.
5 Fasten the battery cover.

Charge the Battery

Charging steps:
1 Install the charger to the AC power

socket.

2 Open the protection tube on the

charging interface of phone, and
connect the charger to phone.

3 The charging sign on the LCD of

phone displays the charging
process.

4 After the charging process is

completed, remove the charger from

13

the power socket, and then remove
the charger from phone.

Caution:

 Before the charging process,

make sure that the battery is
installed correctly.

 During the charging process, do

not move the battery. Failure to
comply may damage the mobile
phone.

Note:

 If the battery voltage is very low,

phone raises an alarm sound,
prompts that battery is drain, and

14

displays the battery icon as.

 If the battery voltage is too low to

keep the phone working, phone
prompts a message indicating
that phone will be automatically
powered off, and is then powered
off automatically.

 If the battery capacity is

exhausted, it takes a few minutes
in the charging process before the
charging icon is displayed on the
LCD.

 After phone is charged completely,

the battery icon is displayed as

15

full on the LCD.

 The charging process takes two

to three hours.

Storage Card

Phone supports the T-Flash card
(purchased separately), which is a
multimedia storage card used to
enhance the mobile phone memory.
This T-Flash card is rigorous. Take
caution when you install or remove it.

Installation steps:

1. Power off the mobile phone.

16

Remove the battery and others
external power supplies.

2. According to the illustration inside
the mobile phone, insert the T-Flash
card into the card groove with the
metal face down.

3. When you take out the T-Flash card,
power off the mobile phone and take
out the battery first, and then take out
the T-Flash card from the card groove.

17

Keys layout

18

Keys Description

Key

Function

Left side

key

Main menu and
confirmation key

Right

side key

Phonebook and return key

End key

Short press：return to the
standby mode and hang up

the call
Long press: power off or
power on the mobile phone

Send

key

Enter call records and dial
up a call

Na

vig

ati

Up

Shortcut menu

Dow

Calculator

19

n

Left

Music player

Right

FM

OK

Main menu

key

0

Short press： enter 0
Long press: Torch on/off

1

Short press：enter 1
Press and hold it: set the

voice mailbox number

2-9

Short press：enter 2 to 9
Long press: dial up the

corresponding number set
in the fast dialup function

*

Short press:Enter * + P W

Long press: Start FM

20

#

Short press ： Enter the
number input page and

enter #

Long press: Change
between the mute profile
and the current profile

Power-on and Power-off

When phone is in the power-off status,
press and hold the 【End key】

to power on phone. When phone is
in the standby status, press and hold

the 【End key 】 , to power off
phone.

21

Standby

Information page:

1:Signal status

2:Certain flowing signals

3:Battery status

4:Time

5:Operator

6:Date

22

Lock the Keypad

Lock the keypad in two ways:
Automatically locked: According to the

“Settings-Phone settings-Auto keypad

lock” menu, the phone is automatically

locked by the keypad lock time.
Manually locked:

In the standby screen, press 【LSK
Key】
and 【* Key】to enter the locked state.

On the locked state, press any key to

23

bright the phone, pop-up the screen of
unlock prompt.

Dial and Receive a Call
Dial a Call

Operation Steps

On the standby screen, press keys on
the key board to enter the telephone

number directly. press 【Send key】
to dial up.

24

 Search a number in the call

records:

 press 【Send key】 to dial up.

 On the page of call records：

 press【Send key】 to dial.

Advanced Operation

 Fast dialup

Enter the “Option -> Phonebook
Setting -> Speed dial” menu.
You can set eight fast dialup numbers,
corresponding to number keys 2 to 9.

25

On the standby screen, you can press
and hold one number key of them to
make fast dialup. Phone automatically
dials the corresponding telephone
number of this number key.

 Emergency call
You can dial international emergency
numbers on phone, such as 112 and
911, no matter the SIM card is installed
or not.

Receive a Call

When there is an incoming call,
perform the following operations:

26

 Press the【Send key】 or 【OK

key】to receive the incoming call. If
the earphone is inserted, you are in

the earphone mode and can receive
the incoming call by using the
earphone.

 Press 【End key】key to refuse

the incoming call.

 Press 【RSR Key】 to receive the

incoming call in muted mode.

Call History

Under the standby status, if you have
missed and dialed calls, besides
received calls, the number of different

27

calls and icon are displayed on the
LCD. You can press 【LSR Key】
to view un-received calls.

FM

Start FM:
Phone provides the FM function. You
can enter the FM page to receive the
FM radio or insert the earphone to
receive it.

Function operations:

 【Up key】: increase the volume
 【 Down key】 : decrease the

volume

28

 【 Left key 】 : switch to the

previous channel in the FM list

 【Right key】: switch to the next

channel in the FM list

 【 RSR Key 】 :Display a

message inquiring whether to
search and save radio stations
automatically. If you select

“Yes”, phone searches radio

stations automatically. If you

select “No”, phone searches in

higher frequencies from the
current frequency, until it finds a
frequency that satisfies signal
indexes of a station.

29

【OK key】: Suspend or play the
radio.

Music player

Start the music player:
You can use the music player to listen
to the music in the mobile phone or in
the T-Flash card. If you select the
T-Flash card, phone automatically
updates all music in the T-Flash card to
the playlist.

Function operations:

 【Up key】: increase the volume
 【 Down key】 : decrease the

volume

30

 【Left key】: play the previous

song

 【Right key】: play the next song
 【OK key】: suspend or play the

music

Calculator

You can use the calculator to perform
simple adding, subtracting, multiplying
or dividing calculations.

Enter the number: Press the number
key [0-9] to enter a number.

Enter the operator: Press the “+、-、*、

/” operators on the touch screen, or

press the up/down/left/right keys to
enter the “+、-、*、/” operators.

31

Alarm

You can set three alarms on phone.
Enter the alarm page and perform the
following operations:
Start the alarm:

. Enter the alarm page from the
main menu.
Function operations:

 Start: Start the alarm. By default,

the alarm is disabled.

 Time: Set the corresponding

time.

 Repeat: Select off, daily,,

weekly, monthly, or yearly

setting.

32

Calendar

Start the calendar:
Function operations:

 Jump to date: In this menu

input specified dates

 Week starts on: Can be set

up from "Sunday" and "Monday"

to check way

Phonebook
Save a Number

Save a telephone number through one
of the following ways:

1. On the standby screen, enter a
number and select “Options -> Save”

33

to save the number to the mobile
phone or the SIM card.

2. Save the number of a received call
or an un-received call to the
phonebook.

3. Add a new telephone number
directly in the phonebook function.

Advanced Function

 Fast dialup: You can define fast

dialup numbers for number keys 2-9
by adding them from the phonebook
or entering them manually. After fast
dialup numbers are defined, you can
press and hold a number key to
make fast dialup.

34

SMS Function
Read a Message

Read the short message through one
of the following two ways:

1. When a new message arrives under
the standby screen:
Read the short message on the SMS

page. Press 【Left key】or 【Right key】
to turn pages, or press 【Up key】or
【Down key】to change lines.

2. Read a message from the inbox.
Select a short message from the inbox.
On the SMS page, you can press the

35

dialup key shortly to dial a call to the
message sender.

Function operations:

 Reply: Respond to this short

message.

 Delete: Delete the selected

short messages.

 Forward: Forward the selected

short message to other

contacting personnel.

 Copy to SIM /phone
 Move to SIM/phone
 Advanced options: Use the

number, copy or move the short

message.

36

Write a Message

Start this function:

1. On the standby screen, press the
【UP key】.

2. Enter this function from the
appended menu.

Note: On the SMS editing page, press
the [#] key to change the input method.

Save sent messages:

By default, sent messages are not
saved. You can select “SMS Settings

-> Common Settings” to modify the
configuration. Select the option of the

37

save sent message

Settings

Profile
Select the “Setting -> profile” menu to
set ring types and volumes for
incoming calls, message, alarms,
keypad tones, alert type, ring volume,
ring type.

SOS status use

SOS call

-Long press SOS button with your
SIM CARD,in the first time phone will

38

indicate you to set SOS number contact.

-You can set max 5 groups SOS number
from phonebook or input directly.

SOS message

You can set SOS message content,The
default message is:SOS!!!

SOS status activate

Long press “SOS” button , the phone will
activate to SOS status and will proceed
below process:

-Alarm broadcast and flash light indicator.
Mobile phone will dial 5 setting SOS
numbers in 3 circle time, the status will
not stop till one of number get through.

39

-When any SOS number get through,
phone will transferred to hands free status
and SOS status finished.

-If all 5 numbers can not get through,
phone will transferred to hands free status
and SOS status finished.

-If all 5 numbers can not get through,
phone will send SOS SMS to them, after
that phone will transfer to the SOS status
in next 1 hour, in the period all incoming
call will get through automatically.

-After all process the phone will return to
normal status again.

Time Settings

Start the function:

40

Set the time in the “Settings -> Phone
Settings -> Set date and time” menu.

Security Settings

You can configure the phone security
settings to prevent your mobile phone
or SIM card from being used illegally.
Refer to the access password.

 SIM card security settings;

1. SIM lock: When the SIM card
lock function is enabled, you
must enter the PIN code when
you power on the mobile phone
each time. Otherwise, you
cannot use this SIM card. Enter
the PIN code correctly. If you

41

enter wrong PIN codes for three
times consecutively, you must
enter the PUK code (personal
unlocking code) to unlock and
modify the locked PIN code. If
the PUK code is not available or
is lost, contact the carrier.

2. Change password: Use this
function to modify the PIN1
code and PIN2 code of the SIM
card on the mobile phone.

 Phone lock: When the mobile

phone lock function is enabled,

to power off the mobile phone

and recover the factory settings,

you should enter the correct

42

mobile phone password, which

is preset as “1122” upon

delivery.

 Change password: Use this

function to modify the password

of the mobile phone.

Recovery Factory Settings

This function recovers some mobile
phone functions to factory settings.
You must enter the password correctly
before using this function.
The preset password is “1122”.

USB Data Cable

Phone provides a USB interface. You

43

can connect the mobile phone to the
computer through the USB data cable.
You can copy or move files between
phone and the computer, or browse
photos, videos and sound files saved
on phone through the computer.
1 Insert the connector of the USB data

cable to the USB interface of phone.

2 Connect the other end of the USB

data cable to the USB interface on

the computer.
3 Select the desired mode.
Note: the cellular phone off state to
identify USB function.

44

Icons
Basic Icons

Icon

Description

Network signal strength of SIM

Current battery capacity

There are unread short
messages on SIM

There are un-received calls on
SIM

There are forwarded calls on
SIM

The alarm is enabled

Key lock

Profile Icons

Icon

Description

45

The current profile is the
standard profile

Silent mode

Vibrate then ring

Vibrate and ring

The current profile is the
conference profile

Headset Mode