Olio Devices H1B Users manual

ACCESSING DEVICE INFORMATION

Device status, firmware, software, and
FCC ID/IC Certifcation Number are available
in the ABOUT menu on the device. To
access the ABOUT menu:

1. Swipe down from the top edge of the
home screen to access settings.

2. Swipe left or right until arriving at the
ABOUT screen.

3. Tap the ABOUT icon to view device
information and FCC ID.

TECHNICAL SPECIFICATIONS

• Operating temperature: 0°C to +50°C

• Water resistance: 5 ATM

• Battery type: Lithium-ion rechargeable

SAFETY AND CARE

• Keep your watch and strap clean
and dry.

• Never use alcohol or abrasive cleaners.

• Never leave in direct sunlight.

• Try not to drop or bang on hard
surfaces.

• 5 ATM water resistance is suitable for
showering and surface swimming.

BLUETOOTH STATEMENT

The Bluetooth® word mark and logos are
registered trademarks owned by their
proprietor and any use of such marks by
Olio Devices is under license.

PRODUCT INFORMATION FOR
OLIO DEVICES MODEL ONE

IC & FCC STATEMENT (FCC ID:
2AEP5H1B, IC: 20282-1H1B)

This device complies with Industry Canada
license-exempt RSS standards. Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.

Cet appareil est conforme avec Industrie
Canada RSS normes exemptes de licence.
Son fonctionnement est soumis aux deux
conditions suivantes: (1) ce dispositif ne peut
pas provoquer d’interférences et (2) cet appareil
doit accepter toute interférence, y compris les
interférences qui peuvent causer un mauvais
fonctionnement de l’appareil.

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference. (2) This device must
accept any interference received, including
interference that may cause undesired
operation.

Changes or modifications not expressly
approved by party responsible for compliance
could void the user’s authority to operate the
equipment.

This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the
equipment and receiver.

3. Connect the equipment into an outlet on
a circuit dierent from that to which the
receiver is connected.

4. Consult the dealer or an experienced radio/
TV technician for help.

This portable transmitter with its antenna
complies with FCC/IC RF exposure limits for
general population/uncontrolled exposure.