OLIMEX MOD-RGB Installation Manual

MOD-RGB

INSTALLATION AND FIRMWARE

SUITABLE FOR FIRMWARE REVISION 3

Document revision B, June 2015

All boards produced by Olimex LTD are ROHS compliant

OLIMEX© 2015 MOD-RGB firmware note

DISCLAIMER

© 2015 Olimex Ltd. Olimex®, logo and combinations thereof, are registered trademarks of Olimex Ltd.
Other product names may be trademarks of others and the rights belong to their respective owners.

The information in this document is provided in connection with Olimex products. No license, express
or implied or otherwise, to any intellectual property right is granted by this document or in connection
with the sale of Olimex products.

The hardware and the software files are released under the Creative Commons Attribution 3.0 License CC
BY-SA.

This license lets others remix, tweak, and build upon your work even for commercial purposes, as long as
they credit you and license their new creations under the identical terms. This license is often compared to
“copyleft” free and open source software licenses. All new works based on yours will carry the same license,
so any derivatives will also allow commercial use. This is the license used by Wikipedia, and is
recommended for materials that would benefit from incorporating content from Wikipedia and similarly
licensed projects.

It is possible that the pictures in this manual differ from the latest revision of the board.

The product described in this document is subject to continuous development and improvements. All
particulars of the product and its use contained in this document are given by OLIMEX in good faith.
However all warranties implied or expressed including but not limited to implied warranties of
merchantability or fitness for purpose are excluded. This document is intended only to assist the reader in the
use of the product. OLIMEX Ltd. shall not be liable for any loss or damage arising from the use of any
information in this document or any error or omission in such information or any incorrect use of the
product.

This product is intended for use for engineering development, demonstration, or evaluation purposes only
and is not considered by OLIMEX to be a finished end-product fit for general consumer use. Persons
handling the product must have electronics training and observe good engineering practice standards. As
such, the goods being provided are not intended to be complete in terms of required design-, marketing-,
and/or manufacturing-related protective considerations, including product safety and environmental
measures typically found in end products that incorporate such semiconductor components or circuit boards.

Olimex currently deals with a variety of customers for products, and therefore our arrangement with the user
is not exclusive. Olimex assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents or services described herein.

THERE IS NO WARRANTY FOR THE DESIGN MATERIALS AND THE
COMPONENTS USED TO CREATE MOD-RGB. THEY ARE CONSIDERED
SUITABLE ONLY FOR MOD-RGB.

Page 2 of 5