Olide SD3108 Product Manual

Automatic Swing door Operator

SD3108

Product manual

△

△

Notes: please keep the manual properly for reference. Do

△△

carefully read this manual before use.

Safety Warning!

Please read carefully the instructions before installing the door operator, we

do not take responsibility for the loss or damage due to the improper use

disobeying the following cautions.

△

△

Do use the power conforming to the regulations! Or otherwise, it may result in

△△

the damage of electronic component of partial circuit of machine.

△

△

Maintain the reliable grounding! The enclosure of automatic door operator

△△

shall be made of metal material which is the sound electrical conductor. The
grounding of automatic door operator must be well done, especially the metal
door body on operator, as the conductor, must be reliably grounded.

△

△

Prevent vapor from intrusion! The automatic door operator is inbuilt with the

△△

complicated and precise electronic components to prevent from vapor. The
machine enclosure is unsealed for maintaining the automatic door operator.

△

△

Prohibit rapidly opening and closing automatic door by hand or rudely! No

△△

matter on operation or power failure, prohibit rapidly opening and closing
automatic door by hand or rudely to avoid the mechanical damage due to
overload of automatic door!

△

△

The safety beam detector is highly recommended to avoid the probability of

△△

collision with pedestrian! If you haven’t the safety beam detector installed, You
might be touched in the door operation area. So please use the safety beam
detector where there are elder and children, and please also lower the
opening/closing speed with the longer hold-opening times.

△

△

The safety beam detector is highly recommended to avoid the probability for

△△

hands to be nipped by the closing door. Do not worry if you haven’t the safety
beam detector installed, because the door operator gives the buffer action and
moves very slowly when the door closes to the 7-12°angle, please also adjust the
inching latching force to a small range for the 100% safety for your children.

△

△

The person unauthorized by the company shall not repair or modify the

△△

spare part! If any problem of automatic door operator is found, the
automatic door operator shall not be directly repaired without permission!
Any modification to the automatic door operator may result in the serious
consequences!

Content

1. Product Overview

1.1 Product Procedure

1.2 LED Indicator

1.3 Main Parameters

2. Installation

2.1 Installation Notice

2.2 Want your door to be

2.3 Installation measurement and mode

3. Wiring diagram

4. Debugging

4.1 Control programmer debugging

4.2 Remote control function debugging and management

5. Trouble shooting

1.Product Overview

Cover

Sliding arm

Articulated arm

Please carefully read this instruction for better use this equipment.

The automatic swing door operator SD3108 is intelligent equipment

controlled by the microcomputer, enjoys excellent capability and strong

function.

△

△

Surface mounting

△△
△

△

Push-Go: Automatic activation by pushing or pulling door panel

△△
△

△

Operators can be integrated with security systems, card readers, etc.

△△
△

△

Quiet and aesthetically pleasing

△△
△

△

Electric strike integration

△△
△

△

Reversing and obstruction sensing

△△
△

△

Efficient and cost-effective

△△
△

△

Battery Convenience Mode-operator can be activated by battery power for

△△

continuous operation in the event of a power failure.

△

△

Easily adjustable opening &closing speeds

△△
△

△

Manual operation in case of power failure

△△

1.1 Operation Procedure

Activated by the signals from external control device, unlock → open → buffer
action&stop→hold-open→close→buffer action&stop→lock and seal.

1.2 LED Indicator

Green lighting LED: Operation status
Red LED lighting LED: The operator is supplier with power

1.3 Main performance parameter

Applicable for single leaf swing door: Max weight 120Kg (264 lb) & Max width
1200mm (48 ")

Installation method: surface mounting (external)
Opening angle: 60°~120°adjustable
Speed of opening/closing: 30-100M/S adjustable
Hold open time: 0-120S adjustable
Working noise: ≤60db
Power supply: 220V±10% 50~60HZ
Safety system: the automatic protection device against overheat, overvoltage, over
current and obstacle-encountering
Rated power: 45W
Static power: 4.8W
Output voltage of power: DC24-12V for the optional accessories, such as body sensor;
access device, safety beam, electric strike and others.

2 Installation

2.1 Installation Notice

◆The operator is available both for the left handing and right handing door ( can
mounted on the hinge side or not the opposite hinge side.)
Articulated arm and sliding arm both can be used to this operator.

◆Door leaf max weight and width: Please refer to the max limit of the door
application; overweight will affect the capacity of the operator. (See below diagram)

◆ Installation measurement: The operator must be installed exactly as the
measurements stipulated by the instruction manual, the improper installation will
decrease the operation of the operator, even cause malfunction and damage.

◆When the operator is supplied with power, the driving axis willrotate360゜. This is
normal action, when it is fixed onto the door leaf, it will perform normally.

2.2 What your door to be

◆Become inductive automatic door by connecting sensor inductor.

◆Become identifying automatic door by connecting code remote control or card

reader and other door access control system.

◆Become apartment automatic door by connecting building intercom system.

◆Become long-distance wiring control automatic door by connecting push button on

the table or wall.

◆Automatic open/close set as required when on fire by connecting to fire alarm
equipment.

◆Automatic close on pilferage by connecting to theft alarm equipment.

◆Become double leaf automatic doors by simultaneous performance of 2 operators.