Olevia 242V, 242-S11, 237V, 237-S12, 237-S11 Owner’s Manual

...

LC TV

2-Series

_ LIE_V|A TM

Syntax-Brillian Corporation

20480 East Business Parkway

City of Industry, California 91789 USA

1-866-9-OLEVtA

of Contents

Important Information I Important Safety Precautions 2 Introducing the OLEVIA TV 5

Accessories 7 TV Installation And Connection Guide

Identifying Front Controls and Rear Panels 8

- Descriptions of Connector Types ]0

- Turn the power on the TV |]

Installation 32

- Connecting to an Antenna or Video Equipment with Antenna Outlet ] 3

- Connecting to a Set-Top-Box with HDMI Cables 14

- Connecting to a Satellite Receiver or Cable Box with Component Connectors 15

- Connecting to a DVD Player withA/V or S Video Cables 16

- Connecting to a DVD Player with Component Cables 17

- Connecting to a DVD Player with HDMI Cables 18

- Connecting to a Satellite Receiver or Cable Box with A/V Cables 19

- Connecting to a VCR, PVR, or DVwithA/V Cables 20

- Connecting to a Blue-Ray DVD Player or HD-Receiver with HDMI Cables and a PC with VGA Cables 2t

- Connecting to a D-VHS with HDMI Cables 22

- Connecting to a D-VHS with Component Cables 23

- Connecting to an Audio Receiver/Home Theater System 24

- Other Audio Connections 25

- Instruction for Uploading New Firmware 26

Remote Control Guide

- Regular Buttons 27

- Battery Installation 28

On Screen Display (OSD) 29

Introduction 29

Operating in the OSD 29

Initial Screen 30

PICTURE OSDAdjusting TV Picture Settings 31

- Description of Settings 31

- Selecting the Picture Mode 32

-Adjusting the Picture Quality 33

AUDIO OSD Adjusting Sound Quality 34

- Description of Settings 34

- Adjusting the Audio Settings 34

- MTS System for Stereo TV 35

SCREEN OSD Adjusting Screen Modes 36

- Description of Settings 36

- Changing the Screen Mode 36

- Selecting the Picture/Video Source 38

SETUP OSD Adjusting Personal TV Settings 39

- Description of Settings 39

- Searching the TV Channels 40

- Editing Channels 41

- Closed Caption Options 45

- Setting up Parental Control Password 46

-Activating the Parental Control Feature 46

- Resetting the Password 52

- Setting the Date and Time 53

- Setting the TVTimer 54

-Timeout Settings for OSD Menu 54

-TV OSD Languages 55

- Setting DPMS 55

- Setting LED Light 55

- Factory Default Option 55

- Displaying the Firmware Version 55

Specifications 56

Timing Mode for VGAand HDMI(PC) 58 Pixels Policy 59

Glossary 60 Panel Display Mount 65

portant Information

Risk of electronic shock Z_

Do not open

To reduce the risk of electronic shock, do not remove cover (or back).

Refer service to qualified Repair Technician or Repair Center.

Read the following context indicated by the following symbol to the left. It indicates important literature in operating the product.

Read the following context indicated by the following symbol to the left. tt indicates a potential high voltage hazard that may compromise your safety.

Take caution when moving the product on a cart.

Caution

Quick stops, excessive force, and uneven surfaces may cause the display unit and cart combination to overturn.

Caution

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

No user-serviceable parts inside.

Caution

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. Prevent electromagnetic interference from electrical appliances such as radios and

televisions. Please use shielded cables and connectors for connections.

Warning

FCC Regulations state that any unauthorized changes or modifications to this equipmenl not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Caution

Make sure that the cable system is grounded to provide protection against voltage surges

t up static charges.

Warning

WARNING! TIllS TEI,EV]SION IS F,XTREMELY Ht_;AVY -- IMPROI ER IIANDI,]NG AND INSTALLATION CAN RESULT IN INJURY TO PEOPLE AND PROPERTY DAMAGE TO THE STRUCTURE AND SURROUNDING PERSONAL PROPERTY ! WALL MOUNTING OF THIS TELEVISION SHOLLD ONLY BE ATTEMPTED BY A

PROFESSIONAL --ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE CAUSED BY FAILED WALL MOUNTING ATTEMPTS WILL NOT BE ACCEPTED BY THE MANUFACTURER[

)

Safety Precautions

Cleaning

Remember to unplug theAC cord from theAC outlet

before cleaning the display unit. Then spray small amount original WINDEX window

clearer (blue stuff), not Ammonia-added clearer, on cloth to clean the display_ Remember to use only soft cotton cloth such as an old

100% cotton T-shirt, not sponges brillo abrasive material, to clean the display. No drips allowed.

Ventilation

Do not cover or block these vents and openings located

on the top and back of the display. Inadequate ventilation

may cause overheating and shorten the lifespan of the display.

Do not place in an enclosed area such as a built-in shelf,

unless proper ventilation is provided or the manufacturer's

instructions are followed. Keep the distance of 10cm

minimum between the display unit and wall. Never instal! the

display unit as indicated in the picture below.

Stand

Do not place the display unit on an unstable place. The TV may fall resulting in serious personal

injuries to nearby people as well as damage to the display unit.

Air circulation is blocked

Never insert objects or spill liquid into the display unit

Never insert any object into the display unit through openings or spill liquid on the display unit. High voltage flows in the display unit, and inserting an

object can cause electric shock and/or short internal parts.

Keep away from water and moisture

Do not place the display in areas where moisture is present or where the unit may get wet such as bath-

rooms, kitchen, pool area or in a wet basement.

Keep away from heat sources

Keep the display unit away from heat sources such

as radiators, heaters, stoves and other heat-generating products.

Precautions when transporting the

display

Carrying the display requires two or more people.

Attachments

Do not use attachments not recommended by the manufacturer. Use of inadequate attachments may

result in accidents to nearby poeple or to the unit.

Power source

This product must operate on a power source specified on the specification label, lfyou are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another

power source, refer to the operating instructions.

The liquid crystal panel used in this

product is made of glass

Do not hit the panel. Be careful to prevent from

getting hurt by broken glass pieces in case the panel

breaks.

Follow operating instructions

All operating instructions must be followed.

Servicing

Do not attempt to service the display unit yourself.

Removing covers expose you to high voltage and

other dangerous conditions. Request a qualified

service technician to perform the service.

AC cord protection

The AC cords must be routed properly to prevent

people fl'om stepping on them or objects from resting

on them. Check the cords at the plugs and product.

Overloading

Do not overload AC outlets or extension cords. It

may result in electric shock or start a fire.

Important Safety Precautions

Replacement parts

In case the display unit needs replacement parts, make sure that the service technician uses replacement

parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

Safety checks

Upon completion of service or maintenance, request the service technician to perform safety checks to ensure that the display unit is in proper operating

condition.

Repair

When the display unit displays an abnormal condition, any noticeable abnormality in the display

unit indicates that the display unit needs servicing. If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a qualified service person to perform repairs.

1.A liquid was spilled on the display unit or objects

have fallen into the display unit.

2.The display unit has been exposed to rain or water.

3.The display unit has been dropped or damaged.

Environment

The display unit only operates within the temperature 0"C to 40 C.Operation outside of the

recommended may cause damage to your product.

Warning

outside antenna system, extreme care should be taken to keep from

I When installing or realigning an

touching such power lines or circuits. Contact with them could be fatal.

® ©

Antenna and satellite grounding

Electric service equipment

Power service grounding electrode system (NEC Art 250. Part H)

Ground clamps

Grounding conductors (NEC Section 810-21)

Antenna discharge unit (NEC Section 810-20)

Grounding clamp

Antenna lead-in wire

oducing the OLEVIA TV

Welcome!

Thank you for purchasing the OLEVIA LCD ItDTV. This manual is to be used with

the following model:

OLEVIA 2 Series

This manual is designed to help you through setting up and operating your

LCD flDTV as quickly as possible. The model and serial numbers are on the back cover of your TV. Write these numbers in the space provided in this

manual for your records. Please read all the safety and operating instructions

carefully, and keep this manual for future reference.

Owner's Record

The model and serial numbers are located at the rear of the display

unit, or on the side of the media receiver unit on the cartons (white label). Record these numbers in the spaces provided below

and register your product at www.olevia.com. Refer to them whenever you call Syntax-Brillian Corporation or local

dealer regarding this product.

Model No.

Serial No.

Olevia and the Olevia logo are trademarks or registered trademarks of Syntax-Brillian Corporation in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol

are registered trademarks of Dolby Laboratories.

DIGITAL

All other corporate names, trademarks, registered trademarks, service marks, symbols,

and logos stated herein are property of their respective companies.

Introducing the Syntax-Brillian Olevia TV

OLEVIA LCD HDTV includes many features, you will enjoy throughout the usage of your TV. These highlighted features include:

Fully Integrated HDTV (High Definition TV): HDTV delivers a stunning picture far beyond the quality of standard

televisions. These programs offer crystal clear video with amazing detail played with enhanced audio quality of digital television programs. You can enjoy better sound and picture in movies, prime time TV shows,

HIGH*DEFiNITION TKLKV[S{ON

and other HD broadcasts in dynamic television settings through cable, satellite or even free broadcasts over the air.

HDMI (High Definition Multimedia Interface): The next generation ofDVI, HDMI provides the best interface between a DVD player and compatible products such as digital set top box for

uncompressed digital audio/video connections. When matched with a H D _r_l ,° OLEVIA TV, multi-channel digital audio signals, uncompressed DV] digital ._.O_,_,,,O,_OLT,M_O,A,_TE_

video and intercommunication between high multimedia interfaces are combined through a single interconnecting cable.

HDMI and the HDMI logo are trademarks or registered trademarks of ttDMI Licensing, LLC.

ATI : For a true high definition cinematic experience, your TV uses the Xilleon image

processing chip from ATI. The Xilleon chip offers many advanced features.

The Xilleon chip allows your new- TV to display a spectrum of over 16 million colors, so you can enjoy a true color viewing experience with vivid tones and

natural hues.

Xilleon uses advanced digital image processing technologies to convert standard definition signals (such as those usually found in analog TV broadcasts,

DVDs, and cable set-top boxes) to the brilliant 1366 x 768 format used by your TV.

With analog video still being broadcast, Xilleon integrates a 3D comb to virtually eliminate problems like dot crawl and keep your display looking its finest.

Xilleon uses advanced deinterlacing technology to reduce artifacts such as

jagged lines in moving pictures. Contrast, sharpness, saturation and many other

parameters are also automatically optimized 60 times per second.

Enjoy your new TV powered by AT[ Xilleon.

cessories

Supplied Accessories

Remote control & Power cord x 1

batteries (AAA x 2)

User manual (CD-ROM) x 1

QSG x 1

Warranty Card x 1

Optional Accessories

Wall Mount Set

Model # WM30D : available for 26" above Models

_ _:_o_o <:_ @

o o

1. Before using the wall mount, please read

[]

its Quick Start Guide and follow assembly

guide.

2. For safety purpose, please purchase wall mount that will support the LCD HDTV

weight.

3. Following installation instruction is only

['oryour reference.

These items are all you need to set up and operate the TV

in its basic configuration.

Note: Most components (VCRs, DVD players, etc.) Come with the necessary cables to connect them. If you want to

set up a complex system, you may need to buy extra cables,

connectors, etc. Be sure to have these on hand before you

start to connect your system.

4. Please consult authorized service personnel

for the installation of wail mount.

Installation and Connection Guide

Identifying Front and Rear Panels

Front Panel

POWER Turns displayon/off,

MENU Displays the On Screen Display(OSD) menu. In OSD menu, press itto

return to the previous screen or to exit.

CHA / CHv Adjusts Channel. in the OSD menu, both keys are used to navigate

VOL+/VOL- Adjusts Volume. in the OSD menu, both keys are used to navigate

SOURCE Press to switch the input sources.

IR SENSOR Contains infra-red light for digital data transmission by the remote

within menu.

within menu. Vol+ is used to select the highlighted option.

control. Please point remote control at IR Sensor for function.

TVInstallation and Connection Guide

Identifying Front and Rear Panels

Rear Panel

_o The power cord connects here,

i ..............

RF Terminal

Component

R 0 0 Pr/Cr

L I_ @ Pb/Cb

Video

R 0 (_ Video

L {_ _ S-V,dec

HDMI/DVI

VGA/Audio Input

R k

Audio Input

RQL®

USB Service Port

To receive signals from VHF / UHF antennas or a cable system

(5 RCA jacks) Used to connect A/V equipment with component video outputs, such as a DVD player, Digital Satellite Receiver, or compatible Video Game System.

NOTE: The component inputs have a superior quality of picture lhan the S-Video or AV (composite video) inputs.

AV (Composite Video: 3 RCA jacks): Used to connect a VCR, Super VHS (S-VHS), DVD player, or other video devices to the TV.

OR S-Video : (1 DIN and 2 RCAjacks) Used to connect video devices to the TV.

tlowever, they have a better quality of picture than a composite video signal.

Used to connect digital video equipment with a HDMI/DVI output.

NOTE: Preferred connection for HDM1/DV1 Satellite or Set-Top-Box equipment.

Used tbr analog RGB signals from a personal computer. VGA has one set of Audio R/L inputs.

As a computer input with VGA to RCA Adapter.

To send an AV receiver or other equipment's connected audio signals to the TV

To download some information from website to TV for user

RS232 Service Port

Only for Service Technician use, not an interface for other devices.

Warning !

This RS232 control port is for service purpose only, and should be used by trained serviceman only. Any random connection may cause damage to this unit.

Used for audio output to earphone.

TV Installation and Connection Guide

Descriptions of Connector Types

You may find it necessary to use some of the following cable types during setup.

75-ohm Coaxial Cable

S-Video Cable

Audio/Video Cable

Video (Yellow)

@]l 1 __ LeftAudio(White)

C_ _ Right Audio (Red)

Component Cable

c_ m _ Pbtcb(Blool

HDMI Cable

For TV/cable connection

Used for transferring video signal, which is split into two signals, brightness and color.

Through this connection, you can view a better picture than AV (Composite Video) connection.

Used ('or transferring audio and video signal.

This connection is the most commonly found on A/V equipment.

Used for transferring video signal, which is split into three signals, one brightness and two color.

Through this connection, you can view abetter high definition picture than S-Video orAV (Composite Video) connection.

Used for transferring digital uncompressed video

and audio signals to the TV.

llDMI signal is purely digital and provides a crystal clear technology better than component, S-Video or Video connections. It is strongly recommended to use this connection i['you have this function on your equipment.

TV Installation and Connection Guide

Turn the power on the TV

Please follow these steps to turn the power on to the TV.

1) Bel'ore connecting the Power Cnrd, make sure all other connections are done first.

2) Connect the Pnwer Cord t¥om a Wall Outlet to the Power IN Port on the back of the TV as shown below.

BackofTV

Power Cord Wall Outlet

Ared or blue light on the front of the TV may turn on. If so, then skip step 3 and do step 4. If the light is NOT on,

do Step 3.

Front of TV

Red or blue light (also called

"standby light").

Color and location depends on model

3) lfa red or blue light on the front of the TV is NOT on, press the Power Button on the back of the TV as shown

below. Now the light on the front turns on. In other words, the Power Button in the back must be on lbr the light

in the front to turn on.

Back of TV

I IIII

(also called "master power Power Button switch")

4) Press the Power Button on the frQn_ of the TV as shown below or on the remote control. Wait about l 0 seconds

for something to appear on-screen. Your TV is on and the red or blue light on the front turns off automatically.

I°! Front of TV

POWER

Button

TV Installation and Connection Guide

Installation

In the following pages, you will find directions on how to install your tv and choice of video equipment.

Connecting to an Antenna or Video Equipment with Antenna outlet

@ Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection)

Connecting to a Satellite Receiver or Cable Box with Component Connectors

(Secondary Preferred after HDMI)

@ Connecting to a DVD Player with A/V or S Video Cables

@ Connecting to a DVD Player with Component Cables

@ Connecting to a DVD Player with HDM1 Cables

Connecting to a Satellite Receiver or Cable Box with A/V Cables

@ Connecting to a VCR, PVR, or DV with A/V Cables

@ Connecting to a Blue-Ray DVD Player or HD-Reeelver with HDMI Cables

and a PC with VGA Cables

Connecting to a D-VHS with HDMI Cables

@ Connecting to a D-VHS with Component Cables

Connecting to an Audio Receiver/Home Theater System

@ OtherAudin Connections

@ Instruction for Uploading New Firmware

TV Installation and Connection Guide

Connecting to an Antenna or Video Equipment with Antenna outlet (For TV and DTV Source)

Disconnect all power sources before making any connection.

1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the TV's VtW/UItF jack (RF Terminal),

iil ,-]'--iI_l,,_i,'li_,i, i, I,,II t,,| iv_!'i'1'im i_

RearofYV

(75-ohm coaxial cable)

If connecting to Video Equipment with Antenna outlet

1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the Video

Equipment's 1N jack.

2. Connect another 75-ohm coaxial cable from the Video Equipment's OUT jacks to the TV's Vtt!_VUHF jacks (RF Terminal).

i i_¥11,'l_4;l_,iil. I_1,0.| Lv_Ii'Ii !'t i_

RearofTV

_b_ (75-ohm coaxial cable)

IN OUT

jack jack

(Video Equipment with

Antenna In/Out Socket)

TV Installation and Connection Guide

Connecting to a Set-Top-Box with HDMI Cables

Disconnect all power sources before making any connection.

1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the Set-Top-Box's VIIF/U HFjack (RF Terminal).

2. Connect a HDMI cable from the Set-Top-Box's HDMI OUT jacks to the TV's HDMI IN jacks.

Ii[,"_--wl'l,'_.ll[,i'_'4,vJ[,I, 1_v

q®

(75-ohm

Set-Top-Box cable)

coaxial

Cable / Satellite

RearofTV

HDMI cable ]

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals t¥om equipment with a HDMI output that features the HDCP functiom HDMI allows the transfer of digital

uncompressed data to the TV. This connection is superior when compared to the Component, S Video or AV (composite) connections.

Note: tlDM1 signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. [t is strongly recommended to use this connection if you have this function on your equipment.

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with Component Connectors (Secondary Preferred after HDMD

Disconnect all power sources before making any connections.

Use this method of connection if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labeled as Y, Cb and Cr or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT j acks to the TV's Audio m jacks.

I il_.l_,l,1. Iil, I_ll!ll _viI,I, l:i I.

Satellite Receiver or Cable Box

_1 R....<TV

Red

Audio cable 1_

White

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (composite) and

S-Video connection.

Note: YPbPr is set at default to best perform with tlD 720p and 1080i content, set Input to "interlace DVD" for best performance with regular 480i and 480p content.

(Menu-[ icture- Mode- input ='Interlace DVD")

TV Installation and Connection Guide

Connecting to a DVD Player with A/V or S Video Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD player does not have component (Y, Pb, Pr) jacks.

Note: If your [)VII) player has component video output connectors, for best picture quality, use the connection described for Connecting to a I) VD Player with Component Connectors.(See page. 17)

1.Using an A/V cable, connect the DVD player's Audio OUT jacks to the TV's Audio IN jacks.

2.Using an S-Video Cable, connect the DVD player's S Video OUT jack to the TV's S Video 1N jack.

DVD Player

I iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii!iiiil

Cd-----__;-s -(_5-_)] o

A/V cable with RCA connector White _

S Video cable

Red

RearofTV

Note: When you connect video equipment to both the same Video and S-Video input jacks, the display will automatically select S-Video first To view Video signal, please disconnect the S-Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has the option. S-Video input has better quality of picture than a composite Video signal.

TV Installation and Connection Guide

Connecting to a DVD Player with Component Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD Player has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your DVD player are solnetimes labeled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the DVD player sAudio OUT jacks to the FV s Audio in jacks.

I il_IJ,1. Iil, I_lltoll _viI,I, l=i I.

DVD Player

Component cable

I iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiTiiiil

Audio cable

]_r --4

Red

White

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and

S-Video connection.

Note: YPbPr is set at default to best perform with HD 720p and 1080i content, set Input to "Interlace DVD" for best performance with regular 480i and 480p content. (Menu -Picture - Mode - Input = "Interlace DVD")

TV Installation and Connection Guide

Connecting to a DVD Player with HDMI Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD Player has ItDM[ jacks.

1.Using a HDMI cable, connect the DVD Player's HDMI output terminal to the TV's HDMI-HDCP input terminal.

DVD Player

HDMI cable

RearofTV

Note: ttDCP is a copy protected digital connection that receives analog or digital video and audio signals fi-om equipment with a HDM1 output that features the HDCP function. HDM1 allows the transfer of digital

uncompressed data to the TVI '["his connection is superior when compared to the Component, S Video or AV (composite) connections.

Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with A/V Connectors

Disconnect all power sources before making any connections.

1.Connect a 75-ohm coaxial cable ti-om your Cable TV to the Satellite Receiver's or Cable Box's Ant (Antenna)

jack.

2.Using Audio and S Video cables, connect the satellite receiver's Audio and S-Video OUT jacks to the TV Audio and S Video IN jacks.

RearofTV

(75-ohm

Satellite Receiver coaxial cable) or Cable Box I_[_

I _ith RCAconnector

_ Red _ ....

SVideocabie

Note: When you connect video equipment to both the same Video and S-Video input jacks, display will automatically select S Video first. To view S-Video signal, please disconnect Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it because S-Video input has better quality of picture than a composite Video signal.

TV Installation and Connection Guide

Connecting to a VCR, PVR, or DV with A/V Cables

Disconnect atl power sources before making any connections.

I .Using A/V cable and S-Video cables, connect the video equipment's Audio and S-Video OUT jacks to the

TV's Audio and S-Video In jacks.

I l_lo_l ,'1.ii I, I!ll t,,| lv_I'iI"I !'_1i..

VCR

PVR

Red

A/V cable with RCA connecto_ _,,,,,,,,,,,,,,,,,,,m_

RearofTV

S Video cable

Connecting both Video IN and S-Video IN Note: When you connect video equipment to both the same Video and S-Video input jacks, display will

automatically select S-Video first. To view Video signal, please disconnect the S-Video jack or turn off the S-Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it. S-Video input has a better quality of picture than a composite Video signal.

+ 49 hidden pages

Olevia 242V, 242-S11, 237V, 237-S12, 237-S11 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual