5-2 Back Cover……………………………………………………………………..…………………………15
5-3 System Board………………………………………………………………………..………………….16
5-4 Power Module for LPL-WX1…………………………………………………………………………17
5-5 Power Module for LPL-WX4……………………………………………………………………………18
5-6 Panel Module…………………………………………………………………………………………….19
5-7 Speakers.…………………………………………………………………………….…………………..20
5-8 Keypad Board……………………………………………………………………………………………21
10. Parts List and Photo………………………………………………………………………………………....33
10-1 Parts List For LPL SL01.………………..................................................................................................33
10-2 Parts Photo For LPL SL01..……………………………………………………………………………35
10-3 Parts List For LPL SLA1………………..................................................................................................45
10-4 Parts Photo For LPL SLA1.……………………………………………….…………………………47
10-5 Parts List For LPL WX4..……………….................................................................................................57
10-6 Parts Photo For LPL WX4..…………………………………………………………….………………59
11. Menu wheel…………………………………….……………………………..…………………………...69
… … … … … … … … … … … … … … … … … … … … … . . 1 1
Company Confidential-DRAFT
TITLE
Service Manual
LCD TV For 237-T11
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 5/72
Company Confidential-DRAFT
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 6/72
TITLE
Service Manual
LCD TV For 237-T11
1. Introduction
1-1 Preface
This service manual describes module-level LCD TV repair for qualified service personnel. This
service manual also includes selected production troubleshooting information for electronic
technicians and engineers.
1-2 Caution
This service manual contains important safeguards and instructions that must be followed for the
safe and proper servicing of this TV.
1-3 Warning
1. Advise customers to follow all operating instructions and safety precautions that have been
furnished with the product.
2. Unplug the ac line cord before cleaning or disassembling the product.
3. Check the ac line cord and plug for wear or damage and replace as necessary.
4. Do not use liquid cleaners or aerosol cleaners to clean the display.
5. Do not place the product on an unstable table or cart. It can cause the product to fall, resulting
in injury and product damage. If a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
6. Use only replacement parts specified by the manufacturer or replacement parts with the same
performance and safety characteristics. Use of substitute parts with different characteristics can
result in fire or electric shock.
7. Do not hit the LCD panel. In case of breakage, use care when removing broken glass.
8. Keep the product away from heat sources such as radiators, heaters, stoves, and other
heat-generating apparatus.
9. Do not block any ventilation openings.
10. Do not use the product near water; for example, near a bathtub, washbasin, kitchen sink
laundry tub, in a wet basement, or near a swimming pool.
11. If the product uses a grounded-type ac plug and line cord, but the location has a 2-prong
receptacle, advice the customer to contact a qualified electrician to replace the outlet.
-4 IMPORTANT INFORMATION FOR TECHNICIAN!
1. After service, press RESET for original factory defaults.
2. Look at the FM Label on the back of the TV to confirm this number is the part list on the
Front cover.
3. There is no identification label for the237-T11.
4. Chip swap front panel (TBD)
Company Confidential-DRAFT
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 7/72
TITLE
Service Manual
LCD TV For 237-T11
2. Specifications
PRODUCT SPECIFICATIONS
LCD Panel 37" TFT 37" TFT(LPL-WX4)
Power Management
Response Time 9ms (Gray to Gray) 9ms (Typ.)
Active Display Area H: 819.6mm, V:460.8mm H: 819.6mm, V:460.8mm
RF Tuner ATSC/NTSC Hybrid Terrestrial
Power Voltage: 100~240 V
Speaker 15W 15W
Compliance FCC, cUL, CSA, Energy Star FCC, cUL, CSA, Energy Star
Temperature
<<<< 1W <<<< 1W
CR>10
R/L 178 (Typ.)
U/D 178(Typ.)
R/L 178 (Typ.)
U/D 178(Typ.)
ATSC/NTSC Hybrid
Video Module
Input level: ~107dBµV
Range: NTSC 55 to 804 MHz,
2-69 channels for Off-Air and
2-125 channels for CATV
Terrestrial Video Module
Input level: ~107dBµV
Range: NTSC 55 to 804 MHz,
2-69 channels for Off-Air and
2-125 channels for CATV
Voltage: 100~240 V/
Consumption: 190W
AC/50~60Hz
Consumption: 190W
2.5A(MAX)
Operating: 0℃℃℃℃~40℃℃℃℃
Operating: 0℃℃℃℃~40℃℃℃℃
Storage: -10℃℃℃℃~60℃℃℃℃
Storage: -10℃℃℃℃~60℃℃℃℃
Weight w/o stand 50.72lbs 50.72lbs
Weight w/ stand 52.9lbs 52.9lbs
Gross Weight 62.84lbs 62.84lbs
Dimensions (WxHxD) 36.73 inches x 29.33 inches x
10.24 inches
Carton Dimensions
(WxHxD)
41.34 inches x 32 inches x 12
inches
Company Confidential-DRAFT
36.73 inches x 29.33 inches x
10.24 inches
41.34 inches x 32 inches x 12
inches
TITLE
Service Manual
LCD TV For 237-T11
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 8/72
Company Confidential-DRAFT
TITLE
3. Diagram
3-1 Wiring Diagram
Service Manual
LCD TV For 237-T11
Company Confidential-DRAFT
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 9/72
TITLE
Service Manual
LCD TV For 237-T11
3-2 System Block Diagram (Video)
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 10/72
Company Confidential-DRAFT
TITLE
Service Manual
LCD TV For 237-T11
3-3 System Block Diagram (Audio)
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 11/72
Company Confidential-DRAFT
Doc No. SM_237-T11_19Nov07
Replace System
board if voltage
1. Check for a loose video
cable connection
3. Change source
Secure connection
Fai
l
Fai
l
Fai
l
Fai
l
Version 1.2
Page 12/72
TITLE
Service Manual
LCD TV For 237-T11
4. Trouble shooting flow chart
4-1 Display Problems
Note: Refer to the Wiring Diagram during troubleshooting for a visual of inter-connections when
indicated by this symbol.
Display Problems
Trouble Condition Check Item Replace Material Test
Abnormal display
1. No video Image
2. Video noise
3. Display flashes
4. Abnomal color
Bright spots
Dark spots
Backlight
uniformity
Light leakage
Spot & Simi
Ghosting
Dust & Scratch
Step1:
2. Check video cable
3. Check source settings
OK
Step2:
Check for a loose or broken
connection between
Con.J11from system board
to Panel LVDS connection.
OK
Step3:
1. Check System board
CN1-pin1 to ground = 5V,
pin3 to ground = 5V or
D4, D64 lighting
2. Check System Board
CN2-pin2 to ground = 12V
Step1:
Check damage to
panel
OK
Step2:
Check for a loose or
broken connection
between Con.J11from
system board to Panel
LVDS connection.
1. Reconnect cable
2. Replace cable
Fai
settings
4. Change TV input
or replace the
LVDS wire
Replace Panel
Replace LVDS
connect wire
is missing.
Test
Finish
Company Confidential-DRAFT
TITLE
Abnormal Power
lighting?
Service Manual
LCD TV For 237-T11
4-2 Abnormal Power On/Off
Trouble Condition Check Item
Abnormal Power
On/Off
No Power
Note: Before
proceeding
confirm that
Power cable is
connected and
that proper
voltage is being
fed to TV. (Check
power switch
located next to
power input and
confirm that it’s
ON.)
Shut down
Source can’t
Off
switch
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 13/72
Step1:
Check Power Supply, Con.
J101–pin 1 to ground = 5V
Con CN1 pin 3 to ground =
5V
OK
Step2:
Check Keypad board
CN1-pin1 to ground =
5V or Check D1
OK
Step3:
Check System Board
CN1 pin1 to ground = 5Vs,
and pin3 to ground = 5V,
Check D4, D64 lighting?
Replace Material
Fail
Replace Power
Fail
Replace Keypad
Fail
Replace System
Test
supply
board
board
Test
Finish
Company Confidential-DRAFT
TITLE
Con.
Secure connection
a loose connection
Service Manual
LCD TV For 237-T11
4-3 LED is Malfunctioning、、、、Keypad Problem
Trouble Condition
LED is Malfunctioning
LED is not working
Note: Before
proceeding
confirm that Power
cable is connected
and that proper
voltage is being
fed to TV. (Check
power switch
located next to
power input and
confirm that it’s
LED flashes
Keypad doesn’t work
Step1:
Check connector CN 10 on
System board to CN1
located on Keypad board for
Step2:
Check connector CN 10 on
System board to CN1
located on Keypad board for
Step 3:
Replace Keypad Board
Step 4:
Company Confidential-DRAFT
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 14/72
Check Item
Step1:
Check CN 10 on system
board to CN 1 on
Keypad board for a
loose connection or bad
cable
OK
Step2:
Check Keypad board
D1 & CN1-pin 1 to
ground = 5V
OK
Step3:
Check System board
CN10-pin1 to ground
= 5V
Check Power supply
J101-pin1 to ground =5V
OK
a broken cable
OK
Fail
Replace System Board
Replace Material
Fail
Fail
Fail
Fail
Fail
Fail
Test
Secure connection
or replace cable
Replace board if
there is no voltage
Replace System
board if there is no
voltage
Replace Power
Supply if there is
no voltage
Replace Cable
Test
Finish
TITLE
Service Manual
LCD TV For 237-T11
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 15/72
Company Confidential-DRAFT
TITLE
Replace System
resolution to
or loose pins.
Step2
:
4. Check TV input
Service Manual
LCD TV For 237-T11
4-4 Image Abnormal Display
Trouble Condition Check Item
Image abnormal display
No picture through
Note: Before
proceeding
confirm that Power
cable is connected
and that proper
voltage is being
fed to TV. (Check
power switch
located next to
power input and
confirm that it’s
Note: Before proceeding make
sure the PC is not in standby or
hibernation mode. Make sure
the video card is secure and not
loose (AGP or PCI slot).
component
No picture through
composite
No picture through
S-Video
No Picture through
Tuner
No picture through
HDMI
No picture through
VGA
Doc No. SM_237-T11_19Nov07
Version 1.2
Page 16/72
Replace Material
Step1:
1. Check video cable
connection
2. Check video cable
3. Check source settings
OK
1. Check System Board
component L52, L49 L53, L50,
L54, L51 for a short.
2. Check System Board
component L65, L68 for a short
3. Check System Board
component L59, L61 L62, L60
for a short