Olevia 2 User Manual

Download

2-Series

of Contents

important information t important Safety Precautions 2 Introducing the OLEVIATV 5

Accessories 7 TV Installation And Connection Guide

identifying Front Controls and Rear Panels 8

- Descriptions of Connector Types i0 = Turn the power on the TV 11

Installation ]2

= Connecting to an Antenna or Video Equipment with Antenna Outlet 13

- Connecting to a Set-Top-Box with HDMI Cables 14 = Connecting to a Satellite Receiver or Cable Box with Component Connectors 15 = Connecting to a DVD Player with A/V or S Video Cables 16 = Connecting to a DVD Player with Component Cables 17 = Connecting to a DVD Player with HDMI Cables lg = Connecting to a Satellite Receiver or Cable Box with A/V Cables 119 = Connecting to a VCR, PVR, or DV with A/V Cables 20 = Connecting to a Blue=Ray DVD Player or HD=Receiver with HDMI Cables and a

PC with VGACables 2]

- Connecting to a D-VHS with HDMI Cables 22 = Connecting to a D=VHS with Component Cables 23

- Connecting to an Audio Receiver/Home Theater System 24 = OtherAudio Connections 25

- Instruction for Uploading New Firmware 26

Remote Control Guide

= Regular Buttons 27 = Battery Installation 28

On Screen Display (OSD) 29

introduction 29

Operating in the OSD 29

initial Screen 30 PICTURE OSD Adjusting TV Picture Settings 31

= Description of Settings 31 = Selecting the Picture Mode 32

-Adjusting the Picture Quality 33

AUDIO OSD Adjusting Sound Quality 34

= Description of Settings 34 =Adjusting the Audio Settings 34

= MTS System for Stereo TV 35

SCREEN OSD Adjusting Screen Modes 36

= Description of Settings 36 = Changing the Screen Mode 36

- Selecting the Picture/Video Source 3g

SETUP OSD Adjusting Personal TV Settings 39

= Description of Settings 39 = Searching the TV Channels 40

= Editing Channels 4J

- Closed Caption Options 45 = Setting up Parental Control Password 46 =Activating the Parental Control Feature 46

= Resetting the Password 52

= Setting the Date and Time 53

- Setting the TV Timer 54

= Timeout Settings for OSD Menu 54

=TV OSD Languages 55

- Setting DPMS 55

= Setting LED Light 55 = Factory Default Option 55 = Displaying the Firmware Version 55

Specifications 56 Timing Mode for VGA and NDMI(PC) 58

Pixels Policy 59

Glossary 60

Panel Display Mount 65

ortant Information

I 1 "

Risk of electronic shock

Do not open

Toreduce the risk of electronic shock, do not remove cover (or back).

No user-serviceable parts inside.

Refer service to qualified Repair Technician or Repair Center.

Read the following context indicated by the following symbol to the left. It indicates important literature in operating the product.

Read the following context indicated by the following symbol to the left. It indicates a potential high voltage hazard that may compromise your safety.

Caution

Take caution when moving the product on a cart. Quick stops, excessive force, and uneven surfaces may cause the display unit and

cart combination to overturn.

Caution

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

Caution 1

This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. Prevent electromagnetic interference from electrical appliances such as radios and

televisions. Please use shielded cables and connectors for connections.

Warning

FCC Regulations state that any unauthorized changes or modifications to this equipment[ not expressly approved by the manufacturer could void the user's authority to operate [

this equipment. J

Caution

Make sure that the cable system is grounded to provide protection against voltage surges and built up static charges.

Warning

WARNING! THIS TELEVISION IS EXTREMELY HEAVY -- IMPROPER HANDLING

AND INSTALLATION CAN RESULT IN INJURY TO PEOPLE AND PROPERTY

DAMAGE TO THE STRUCTURE AND SURROUNDING PERSONAL PROPERTY!

WALL MOUNTING OF THIS TELEVISION SHOULD ONLY BE ATTEMPTED BY A

PROFESSIONAL -- ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY

DAMAGE CAUSED BY FAILED WALL MOUNTING ATTEMPTS WILL NOT BE

ACCEPTED BY THE MANUFACTURER!

portant Safety Precautions

Cleaning

Remember to unplug the AC cord from the AC outlet

before cleaning the display unit.

Then spray small amount original WINDEX window clearer (blue stuff), not Ammonia-added clearer, on cloth to clean the display. Remember to use only soft cotton cloth such as an old 100% cotton T-shirt, not sponges brillo abrasive

material, to clean the display.

No drips allowed.

Stand

Do not place the display unit on an unstable place. The TV may fall resulting in serious personal injuries to nearby people as well as damage to the

display unit.

Ventilation

Do not cover or block these vents and openings located on the top and back of the display. Inadequate ventilation

may cause overheating and shorten the lifespan of the display. Do not place in an enclosed area such as a built-in shelf, unless proper ventilation is provided or the manufacturer's

instructions are followed. Keep the distance of 10cm minimum between the display unit and wall. Never install the display unit as indicated in the picture below.

Air circulation is blocked

ImportantSafetyPrecautions

Never insert objects or spill liquid

into the display unit

Never insert any object into the display unit through openings or spill liquid on the display unit. High voltage flows in the display unit, and inserting an object can cause electric shock and/or short internal

parts.

Precautions when transporting the

display

Carrying the display requires two or more people.

Keep away from water and moisture

Do not place the display in areas where moisture is present or where the unit may get wet such as bath-

rooms, kitchen, pool area or in a wet basement.

Keep away from heat sources

Keep the display unit away from heat sources such

as radiators, heaters, stoves and other heat-generating products.

The liquid crystal panel used in this

product is made of glass

Do not hit the panel. Be careful to prevent from

getting hurt by broken glass pieces in case the panel

breaks.

Attachments

Do not use attachments not recommended by the manufacturer. Use of inadequate attachments may

result in accidents to nearby poeple or to the unit.

Power source

This product must operate on a power source specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company. For units designed to operate on batteries or another

power source, refer to the operating instructions.

AC cord protection

The AC cords must be routed properly to prevent

people from stepping on them or objects from resting

on them. Check the cords at the plugs and product.

Follow operating instructions

All operating instructions must be followed.

Servicing

Do not attempt to service the display unit yourself.

Removing covers expose you to high voltage and

other dangerous conditions. Request a qualified

service technician to perform the service.

Overloading

Do not overload AC outlets or extension cords. It

may result in electric shock or start a fire.

Important Safety Precautions

Replacement parts

In case the display unit needs replacement parts,

make sure that the service technician uses replacement

parts specified by the manufacturer, or those with

the same characteristics and performance as the original parts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

Safety checks

Upon completion of service or maintenance, request the service technician to perform safety checks to ensure that the display unit is in proper operating

condition.

Repair

When the display unit displays an abnormal condition, any noticeable abnormality in the display unit indicates that the display unit needs servicing.

If any of the following conditions occurs, unplug the AC cord from the AC outlet, and request a

qualified service person to perform repairs.

1.A liquid was spilled on the display unit or objects

have fallen into the display unit.

2.The display unit has been exposed to rain or water.

3.The display unit has been dropped or damaged.

Environment

The display unit only operates within the temperature 0C to 40"C.Operation outside of the

recommended may cause damage to your product.

Warning

When installing or realigning an outside antenna system, extreme

care should be taken to keep from touching such power lines or circuits.

Contact with them could be fatal.

Antenna and satellite grounding

I II I t. I _ 01

Electric service equipment

Power service grounding electrode system (NEC Art 250. Part H)

Ground clamps

Grounding conductors (NEC Section 810-2t)

Antenna discharge unit (NEC Section 810-20)

Grounding clamp

Antenna lead-in wire

oducing the OLEVIA TV

Welcome!

Thank you for purchasing the OLEVIA LCD HDTV. This manual is to be used with

the following model:

OLEVIA 2 Series

This manual is designed to help you through setting up and operating your

LCD HDTV as quickly as possible. The model and serial numbers are on the back cover of your TV. Write these numbers in the space provided in this

manual for your records. Please read all the safety and operating instructions

carefully, and keep this manual for future reference.

Owner's Record

The model and serial numbers are located atthe rear of the display

unit, or on the side of the media receiver unit on the cartons (white label). Record these numbers in the spaces provided below

and register your product at www.olevia.com. Refer to them whenever you call Syntax-Brillian Corporation or local dealer regarding this product.

Model No.

Serial No.

Olevia and the Olevia logo are trademarks or registered trademarks of Syntax-Brillian

Corporation in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol

are registered trademarks of Dolby Laboratories.

I"]["] IDOLBY[°

DIGITAL

All other corporate names, trademarks, registered trademarks, service marks, symbols,

and logos stated herein are property of their respective companies.

Introducing the Syntax-Brillian Olevia TV

OLEVIA LCD HDTV includes many features, you will enjoy throughout the usage of your TV. These highlighted features include:

Fully Integrated HDTV (High Definition TV): HDTV delivers a stunning picture far beyond the quality of standard

televisions. These programs offer crystal clear video with amazing detail played with enhanced audio quality of digital television programs. You can enjoy better sound and picture in movies, prime time TV shows, and other HD broadcasts in dynamic television settings through cable,

satellite or even free broadcasts over the air.

HDMI (High Definition Multimedia Interface): The next generation of DVI, HDMI provides the best interface between a DVD player and compatible products such as digital set top box for uncompressed digital audio/video connections. When matched with a OLEVIA TV, multi-channel digital audio signals, uncompressed DVI digital video and intercommunication between high multimedia interfaces are

combined through a single interconnecting cable.

HDMI and the HDMI logo are trademarks or registered trademarks of HDMI Licensing, LLC.

H||| TM

H{GH DEFINITION MULTIMEDIA INTERFACE

ATI:

For atrue high definition cinematic experience, your TV uses the Xilleon image processing chip from ATI. The Xilleon chip offers many advanced features.

The Xilleon chip allows your new TV to display a spectrum of over 16 million colors, so you can enjoy a true color viewing experience with vivid tones and natural hues.

Xilleon uses advanced digital image processing technologies to convert standard definition signals (such as those usually found in analog TV broadcasts,

DVDs, and cable set-top boxes) to the brilliant 1366 x 768 format used by your TV.

With analog video still being broadcast, Xilleon integrates a 3D comb to virtually eliminate problems like dot crawl and keep your display looking its finest.

Xilleon uses advanced deinterlacing technology to reduce artifacts such as

jagged lines in moving pictures. Contrast, sharpness, saturation and many other

parameters are also automatically optimized 60 times per second.

Enjoy your new TV powered byATI Xilleon.

,cessories

Supplied Accessories

Remote control & Power cord x 1

batteries (AAA x 2)

c l

User manual

(CD-ROM) x 1

QSG x 1

Warranty Card x 1

I_l syn_xBrillian _l

........g_r........

Optional Accessories

Wall Mount Set

Model # WM30D : available for 26" above Models

() c: -_ :> c: . c > c ._ () i

o o

i/° >,

\ !J

C:=2? c .............................> c::=:i::_;2_ < ................_ c _ <::::::::::::_ c:::_ i

1. Before using the wall mount, please read its Quick Start Guide and follow assembly

guide.

2. For safety purpose, please purchase wall mount that will support the LCD HDTV

weight.

3. Following installation instruction is only

for your reference.

4. Please consult authorized service personnel for the installation of wall mount.

These items are all you need to set up and operate the TV in its basic configuration.

Note: Most components (VCRs, DVD players, etc.) Come

with the necessary cables to connect them. If you want to

set up a complex system, you may need to buy extra cables, connectors, etc. Be sure to have these on hand before you

start to connect your system.

Installation and Connection Guide

Identifying Front and Rear Panels

Front Panel

POWER

CHA / CHv

VOL+/VOL-

SOURCE

IR SENSOR

Turns display on/off.

Displays the On Screen Display(OSD) menu. in OSD menu, press it to

return to the previous screen or to exit.

Adjusts Channel. In the OSD menu, both keys are used to navigate within menu.

Adjusts Volume. in the OSD menu, both keys are used to navigate

within menu. Vol _ is used to select the highlighted option.

Press to switch the input sources.

Contains Infra-red light for digital data transmission by the remote control. Please point remote control at IR Sensor for function.

Identifying Front and Rear Panels

Rear Panel

AC In The power cord connects here.

RF Terminal

Component

R 0 OPr/Cr

L (_ @ Pb/Cb

Video

R 0 (_ Video

L (_ @ S-Video

HDMI/DVI

VGA/Audio Input (PC) Port

R L

Audio Input

R®L®

USB Service Port

RS232 Service Port

Earphone

To receive signals from VHF / UHF antennas or a cable system

(5 RCAjacks) Used to connect A/V equipment with component video outputs, such as a DVD player, Digital Satellite Receiver, or compatible Video Game System.

NOTE: The component inputs have a superior quality of picture than the S-Video or AV (composite video) inputs.

AV (Composite Video: 3 RCA jacks): Used to connect a VCR, Super VHS (S-VHS), DVD player, or other video devices to the TV.

OR S-Video : (1 DIN and 2 RCA jacks) Used to connect video devices to the TV.

However, they have a better quality of picture than a composite video signal.

Used to connect digital video equipment with a HDMI/DVI output.

NOTE: Preferred connection for HDMI/DVI Satellite or Set-Top-Box equipment.

Used for analog RGB signals from a personal computer. VGA has one set of Audio R/L inputs.

As a computer input with VGA to RCA Adapter.

To send an AV receiver or other equipment's connected audio signals to the TV

To download some information from website to TV for user

Only for Service Technician use, not an interface for other devices.

Warning !

This RS232 control port is for service purpose only, and should be used by trained serviceman only. Any random connection may cause damage to this unit.

Used for audio output to earphone.

TV Installation and Connection Guide

Descriptions of Connector Types

You may find it necessary to use some of the following cable types during setup.

75-ohm Coaxial Cable

S-Video Cable

Audio/Video Cable

Video (Yellow)

Left Audio (White)

Right Audio (Red}

Component Cable

Y (Green)

Pb/Cb (Blue)

Pr/Cr (Red)

HDMI Cable

For TV/cable connection

Used for transferring video signal, which is split into two signals, brightness and color.

Through this connection, you can view a better picture than AV (Composite Video) connection.

Used for transferring audio and video signal.

This connection is the most commonly found on A/V equipment.

Used for transferring video signal, which is split into three signals, one brightness and two color.

Through this connection, you can view a better high definition picture than S-Video orAV (Composite Video) connection.

Used for transferring digital uncompressed video

and audio signals to the TV.

HDMI signal is purely digital and provides a crystal clear technology better than component,

S=Video or Video connections, it is strongly

recommended to use this connection if you have

this function on your equipment.

TVInstallationandConnectionGuide

Turn the power on theTV

Please follow these steps to turn the power on to the TV.

1) Before connecting the Power Cord, make sure all other connections are done first.

2) Connect the Power Cord from a Wall Outlet to the Power iN Port on the back of the TV as shown below.

Back of TV

Power IN ]

Port

Power Cord Wall Outlet

A red or blue light on the front of the TV may turn on. lfso, then skip step 3 and do step 4. If the light is NOT on, do Step 3.

Red or blue light (also called

"standby light").

Color and location depends on model

3) lfa red or blue light on the front of the TV is NOT on, press the Power Button on the back of the TV as shown

below. Now the light on the front turns on. In other words, the Power Button in the back must be on for the light

in the front to turn on.

Back of TV

Power Button (also called "master power switch")

4) Press the Power Button on the front of the TV as shown below or on the remote control. Wait about 10 seconds for something to appear on-screen. Your TV is on and the red or blue light on the front turns offautomatically.

Front of TV

POWER

Button

Installation

TV Installation and Connection Guide

In the following pages, you will find directions on how to install your tv and choice of video equipment.

_ Connecting to an Antenna or Video Equipment with Antenna outlet

_ Connecting to a Set-Top-Box with HDMI Cables (Preferred TV connection)

_ Connecting to a Satellite Receiver or Cable Box with Component Connectors

(Secondary Preferred after HDMI)

_ Connecting to a DVD Player with A/V or S Video Cables

_ Connecting to a DVD Player with Component Cables

_ Connecting to a DVD Player with HDMI Cables

_ Connecting to a Satellite Receiver or Cable Box with A/V Cables

_ Connecting to a VCR, PVR, or DV with A/V Cables

_ Connecting to a Blue-Ray DVD Player or HD-Receiver with HDMI Cables

and a PC with VGA Cables

_ Connecting to a D-VHS with HDMI Cables

_ Connecting to a D-VHS with Component Cables

_ Connecting to an Audio Receiver/Home Theater System

_ Other Audio Connections

_ Instruction for Uploading New Firmware

TV Installation and Connection Guide

Connecting to an Antenna or Video Equipment with Antenna outlet (For TV and DTV Source)

Disconnect all power sources before making any connection.

1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the TV's

VHF/UHFjack (RF Terminal).

iiiiill....

(75-ohm coaxial cable)

Rear of TV

If connecting to Video Equipment with Antenna outlet

t. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the Video

Equipment's lNjack.

2. Connect another 75-ohm coaxial cable from the Video Equipment's OUT jacks to the TV's VHF/UttF jacks

(RF Terminal).

y//

(75 ohm coaxial cable)

(75-ohm coaxiamcaMe) I m ' " "

IN OUT

jack jack

(Video Equipment with

Antenna In/Out Socket)

Rear of TV

TV Installation and Connection Guide

Connecting to a Set-Top-Box with HDMI Cables

Disconnect all power sources before making any connection.

1. Connect a 75-ohm coaxial cable (or choice of Antenna Cable) from your cable or antenna to the

Set-Top-Box's VHF/UHF jack (RF Terminal).

2. Connect a tlDMI cable from the Set-Top-Box's tIDMI OUT jacks to the TV's HDMI IN jacks.

RearofTV

Cable /

Satelmite

El®

(75-ohm

coaxial

Set-Top-Box cable)

uncompressed data to the TV. This connection is superior when compared to the Component, S Video orAV (composite) connections.

Note: tlDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with Component Connectors (Secondary Preferred after HDMI)

Disconnect all power sources before making any connections.

Use this method of connection if your Satellite Receiver or Cable Box has component (Y, Pb, Pr)jacks.

1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y,

Pb and Pr jacks on the TV.

CoLors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y. lfso, connect the cables to the matching colors.

2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to the TV's Audio in

jacks.

[

Satellite Receiver or Cable Box

_ _ I witllRCAconnector RearofTV _

Red

Audio cable

White

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (composite) and

S-Video connection.

Note: YPbPr is set at default to best perform with iLD 720p and 1080i content, set input to "Interlace DVD"

for best performance with regular 480i and 480p content.

(Menu - Picture - Mode - Input = "interlace DVD")

TV Installation and Connection Guide

Connecting to a DVD Player with A/V or S Video Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD player does not have component (Y, Pb, Pr) jacks. Note: If your DVD player has component video output connectors, for best picture quality, use the connection described for Cnnnecting to a D VD Player with Component Connectors. (Seepage. 17)

l .Using an A/V cable, connect the DVD player's Audio OUT jacks to the TV's Audio IN jacks.

2.Using an S-Video Cable, connect the DVD player's S Video OUT jack to the TV's S Video IN jack.

DVD Player

£9 ooo oooD

RearofTV

Red

i_ A/V cable with RCAcoeeector _ '_"

Note: When you connect video equipment to both the same Video and S-Video input jacks, the display will automatically select S-Video first. To view Video signal, please disconnect the S-Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has the option. S-Video input has better quality of picture than a composite Video signal.

TVlnstallationandConnectionGuide

Connecting to a DVD Player with Component Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD Player has component (Y, Pb, Pr)jacks.

1.Using a component video cable, connect the DVD Player's Y, Pb and Pr jacks to the Y, Pb and Pr jacks on

the TV.

Colors on Component Video connectors:

V: Green Pb (also identified as Cb, CB or B-Y): Blue

Pr (a/so identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your DVD player are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the DVD player's Audio OUT jacks to the TV's Audio in jacks.

DVD Player

(o ooo ooo)

R0arofTV

Red

White

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and

S-Video connection.

Note: YPbPr is set at default to best perform with HD 720p and 1080i content, set Input to "interlace DVD"

for best performance with regular 480i and 480p content.

(Menu - Picture - Mode - Input = "Interlace DVD")

TV Installation and Connection Guide

Connecting to a DVD Player with HDMI Cables

Disconnect all power sources before making any connections.

Use this method of connection if your DVD Player has HDMI jacks.

1.Using a HDMI cable, connect the DVD Player's HDMI output terminal to the TV's HDMI-HDCP input

terminal.

RearofTV

DVD Player

(o ooo ooo) 0

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digitat uncompressed data to the TV. This connection is superior when compared to the Component, S Video orAV (composite) connections.

Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with A/V Connectors

Disconnect all power sources before making any connections.

1.Connect a 75-ohm coaxial cable from your Cable TV to the Satellite Receiver's or Cable Box's Ant (Antenna)

jack.

2.Using Audio and S Video cables, connect the satellite receiver's Audio and S-Video OUT jacks to the TV Audio and S Video IN jacks.

RearofTV

(75-ohm

Satellite Receiver coaxial cable) | or Cable Box Im_t_l_

C coooecto

._ _ _ ...........................................................

S Video cable lr I I _"°

Note: When you connect video equipment to both the same Video and S-Video input jacks, display will automatically select S Video first.

To view S-Video signal, please disconnect Video jack or turn off the Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it because S-Video input has better quality of picture than a composite Video signal.

TV Installation and Connection Guide

Connecting to a VCR, PVR, or DV with A/V Cables

Disconnect all power sources before making any connections.

i .Using A/V cable and S-Video cables, connect the video equipment's Audio and S-Video OUT jacks to the

TV's Audio and S-Video In jacks.

VCR Rea r of TV

(o ooo ooo) O

PVR

iiii iiiiQI

Red

A/V cable with RCAconnector _

Connecting both Video IN and S-Video IN Note: When you connect video equipment to both the same Video and S-Video input jacks, display will

automatically select S-Video first. To view Video signal, please disconnect the S-Video jack or turn off the S-Video signal on the video equipment.

S-Video is strongly recommended for use if your VCR or video equipment has it. S-Video input has a better quality of picture than a composite Video signal.

TV Installation and Connection Guide

Connecting to a Blue-Ray DVD Player or HD-Receiver with HDMI Cables

Disconnect all power sources before making any connections.

1 .Using a HDMI cable, connect the DVD's HDMI

output terminal to the TV's HDMI-HDCP input terminal.

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals

from equipment with a !tDMI output that features the HDCP function. HDMI allows the transfer of digital uncompressed data to the TV. This connection is

superior when compared to the Component, S Video

or AV (composite) connections.

equipment.

Blue-Ray DVD Player / HD-Receiver

HDMI cable !

RearofTV

Connecting to a PC with VGA Connector

Disconnect all power sources before making any connections.

1 .Using a D-Sub 15 pin cable, connect the VGA

output terminal of the PC to the TV's VGA signal input terminal.

2.You may need to use a Stereo mini jack to Audio in connectors to receive audio.

® , o|* -t_ ll**" !

Audio cable

RearofTV

TV Installation and Connection Guide

Connecting to a D-VHS with HDMI Cables

Disconnect all power sources before making any connections.

1 .Connect a 75-ohm coaxial cable from your cable or antenna to the Set-Top-Box's Antenna jack.

2.Using Audio and S-Video (YPbPr, or tlDMI is strongly recommended) cables, connect the Set-Top-Box's Audio and S-Video OUT jacks to the TV's Audio and S-Video IN jacks.

3.Connect an I-Link cable from the Set-Top-Box to the D-VHS equipment for video transmission and record.

4.Using a HDM[ cable, connect the D-VHS's HDMI OUT jack to the TV's HDMI IN jacks for watching the

recorded videos.

Cable / Satellite

(75-ohm /

coaxial cable)

Set-Top-Box

| | Red

| _ A/V cable with

S Video cable

D-VHS @

I [ Bo lcable

@ R.... fZV

i-Link cable

Rear of TV

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digital uncompressed data to the TV. This connection is superior when compared to the Component, S Video orAV

(composite) connections.

TV Installation and Connection Guide

Connecting to a D-VHS with Component Cables

Disconnect all power sources before making any connections.

Use this method of connection if your D-VHS has component (Y, Pb, Pr) jacks.

1 .Connect a 75-ohm coaxial cable from your cable or antenna to the Set-Top-Box's Antenna jack.

2.Using Audio and S-Video (YPbPr, or HDMI is strongly recommended) cables, connect the Set-Top-Box's Audio and S-Video OUT jacks to the TV's Audio and S-Video IN jacks.

3.Connect an I-Link cable from the Set-Top-Box to the D-VHS equipment for video transmission and record.

4.Using Audio and Component video cables, connect the D-VHS's Audio and Y, Pb and Pr OUT jacks to the

TV's Audio and Y, Pb and Pr IN jacks for watching the recorded videos.

Colors on Component Video connectors:

Y: Green Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

[[iill....

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (Composite) and S-Video connection.

Note: YPbPr is set at default to best perform with HD 720p and 1080i content, set Input to "Interlace DVD" for best performance with regular 480i and 480p content.

(Menu - Picture - Mode - Input = "Interlace DVD")

TV Installation and Connection Guide

Connecting to an Audio Receiver / Home Theater System

Disconnect all power sources before making any connections.

l .Using the audio cable, connect the TV's audio OUT jack to the audio receiver's or Home Theater System's

audio IN or AUX IN jacks.

Audio Receiver

(o ooo ooo) 0

White

Home Theater System

Audio cable

Red

White

RearofTV

Note: When connecting an Audio output signal, an external Audio amplifier is necessary to amplify the signal for external speakers.

Note: If you connect a Home Theater Sound System, please disable the TV's speakers in the OSD by selecting offin audio section. Volume adjustment must be made on the Home Theater Receiver. By not disabling the TV's speakers it may cause the speakers or the TV itself damage.

TVInstallationandConnectionGuide

Other Audio Connections

Disconnect all power sources before making any connections.

See setup instructions for: Connecting to an Audio Receiver on page 24.

Note: Speakers must be amplified using an audio receiver such as a Home Theater System to amplify the audio from the TV.

JJJJll....

Speaker Outputs Rear of TV

Red

White

Audio cable

lliiii,,....

RearofTV

lleadphone Set

Note: When headphone is plugged in the speaker, it will turn into mute mode.

TV Installation and Connection Guide

Instruction for Uploading New Firmware

1.Go to our website : www.olevia.com and register TV.

2.Click FutureProof(TM) your TV. You will need the serial number of your Olevia TV and a USB flash drive.

3 .Click on the instructions for your particular model of Olevia TV.

4.Follow the instructions on the website for your specific model to download the new firmware and to load the firmware into the TV.

,mote Control Guide

Remote Function Keys & Description

Regular Buttons

_]_ POWER Press to turn display on/off.

[] LIGHTING Press to switch the lighting mode

between Dark, Medium, Bright Room.

ASPECT Press to switch the aspect ratio between Aspect, Full, Panoramic, Zoom, 1:1 mode.

[] FREEZE (Optional function currently unavailable)

[_ NUMBER BUTTONS Press to select channels on

the display.

[] RETURN Press to return the previous-channel.

IFt VOL+/VOL- Press to adjust the volume.

[_ MUTE Press to mute the sound.

[] DIRECTION BUTTONS :

A/I_ Press to select between four main sections or

select the function item.

"_/_ Press to enter to Sub-Menu, select the function

item or adjust the value bar.

[_ SOURCE Press to switch the source input between

Tuner, Composite, S-Video, Component, HDMI, VGA, and VGA Component.

[[[I AUDIO Press to switch the TVAudio System

between SAP, Mono or Stereo mode.

[_ AUTO Press to adjust screen position automatically

when the screen image is not centered under VGA mode.

[_ C.C. Press to call up the Closed Caption (CC) and

Caption Service (CS) list.

_] FAVORITE Press to select favorite channels.

Can be preset in OSD Menu.

[_ SLEEP Press to automatically shut offthe TV after

a preset period of time has passed.

[] CH+ / CH- Press to adjust channel up and channel

down.

TIME Press to set the display to automatically turn off at the set time.

MENU Press to activate or close the On Screen Display menu.

ENTER Press to enter to Sub-Menu, or highlight and set up menu.

DISPLAY Press to display the information of current channel number and time.

Remote Control Guide

Battery Installation

1.Push the tab and pull it out as illustrated below.

2.Insert two size AAA batteries (supplied) by matching the (+) and (-) on the batteries to the diagram inside the remote control's battery department.

3 .Replace the cover back and make sure the cover "snaps" into the remote

control.

Note:

1.The display unit comes with two new AAA batteries as accessories. However, due to uncontrollable causes, the electricity of the accessory batteries may be partially or completely drained. We do not warrant the

quality of the batteries in any case since many factors are considered. If replacement is needed, please purchase two AAA batteries.

2.Handle remote with care. Avoid dropping it, placing in direct sunlight, near a heater, high areas of humidity or getting it wet. If the remote gets wet, please wipe it dry immediately. In the event of the remote not working properly or is in operational, a replacement of remote control may be

required.

3 .If you do not use the remote control for a long period of time, please remove

the batteries and store in a cool place to preserve battery life.

4.Do not mix new and used or with different types of batteries for operation.

Screen Displays (OSD)

After you have finished connecting your TV, you are now ready to choose

and personalize your TV settings in the OSD (On Screen Display) menu.

There are four main sections in the OSD Menu:

Picture OSD

Screen OSD

Audio

OSD

Setup OSD

e= = ." _ j == • |

• _'"_,,

1 Press" button to enter OSD

menu mode.

2. To select between four main sections,

press the keys"A" and "T "

3. To enter to Sub-Menu,press the keys

"4 " ,"D =_ " or "_ "

4. To select the function item, press the

keys "A", "T", "_,1", or "=_".

5. To adjust the value bar, press the keys

"<1" and "l_,_".

6. To select and set up, press " _".

7. To go back to last OSD Menu or exit

M_NU

,@ ,

the OSD menu, press' ' again or without action for ] 2 seconds of

inactivity.

On Screen Displays (OSD)

| _. i = = |

1. Selecting the OSD Language

The first time you power on the TV, there are three manguage formats avaimable for the OSD Menu. You maysemect it by doing the following: Engmish, Fran_ais, EspaS"oL

2. Selecting input Source

After the Language selection, the input Source Screen will appear for your

semection.

2.1 Tuner : By selecting Tuner1 you must perform

a channel scan by following the menu screens.

2.2 HDMI : HDMm supports internam and externam audio

for PC and Video applications.

* Regular - Semect Regumar if the video

equipment supports audio through the

HDMI cable.

(Notes :Most video equipment supports audio through HDMI cable,)

* External- if your device does not

support audio through HDMI cable then semect External

(Notes :An example is your PC.)

2.1 Tuner Source

(To select (To confirm) the item)

2.2 HDMI Source

L.k!._£

(Toselect

the item)

(Toselect

,_the item)

(To confirm)

[ Z#ii

(To select (To confirm) the item)

(To select the item)

On Screen Displays (OSD)

Picture OSD Adjusting TV Picture Settings

|- o o I e " i_.

Brightness To adjust brightness contrast of the picture

Contrast To adjust comor contrast of the picture

Color temp To adjust image color intensity

6500

Native To select the nature color tones of the picture

Comor To adjust the comor intensity

Tint To decrease or increase red or green tones of the picture

Sharpness To adjust sharpness or softness of the picture

Mode

Lighting Dark / Medium / Bright Room To adjust darkness or lightness of the screen

Input VCR / Interlaced DVD / To select the video input source with varied qualities

Progressive DVD / Standard

DefTV / High DefTV/User

Power Up Showroom(Demo) / Home(Normal Use)

Step 1. Press Menu

Step 2. Press Up/Down until you see

PICTURE, then press enter

Step 3. Press Up/Down until you see

Color Temp, then press enter

Step 4. Press Up/Down until you

see 6500, then press enter

On Screen Displays (OSD)

Mode

In this "Mode" Index, you can select one

of the picture modes which is suitable for

the program you are watching.

To adjust darkness or lightness of the screen

* Dark Room : To darken the screen

* Medium Room

* Bright Room : To brighten the screen

To select the video input source with varied qualities

* VCR

* interlaced DVB

* Progressive DVD

* Standard Def TV

* High Def TV

* User

(To show the Main

Menu)

(To select the item)

, I@1...

(Toenter the sub-menu)

(To select the item)

(_'/_'/_) (To enter the (_7_!

.............. sub-menu) .............

rA7_I (To select .............

............. the item) L_: ,/',:Zi

i i

(To go beck lest OSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

Power _ : Selects the most appropriate setting for your TV. (Read carefully, modes effect TV performance.)

* Showroom (Demo) : This mode is available for businesses

that will use the TVto demonstrate in their stores. (Notes : This mode blocks

most OSD settings,)

* Home (Normal Use) : This mode provides the best settings to view the TV for regular use.

Disable Showroom Mode and Enable Home Mode

(Follow these 4 steps to activate Home Mode)

Step I. Press Menu and Scroll up/down to "Picture" and press the "Enter or Right Arrow key".

Step 2. Scroll up/down to "Mode" and press "Enter or Rig ht Arrow

key".

Step 3. Scroll up/down

to "Power Up" and press "Enter or Right Arrow key".

Step 4. Scroll up/ down to "Home"

and press "Enter or Right Arrow key" to activate

HOME MODE.

On Screen Displays (OSD)

In this Setup Index, you can adjust the video and picture settings to suit your personal preferences.

Brightness

To darken or brighten the picture

Contrast

To reduce(soften) or enhance(deepen) color contrast of the picture

Color

To decrease or increase color intensity of the picture

(To show

the Main

Menu)

(To select the item)

, @o/%!_7"_"[_.) (Toenterthe.... sub-menu)

(To enter the /_')

............... sub-menu) ...............

[I._.'.'IZII_] (To adjust the settings)[[_[[Z[[_'[!

:,'___'

(To go back last OSD Menu or exit OSD Menu)

Tint

It allows you to decrease or increase red or green tones of the picture.

Sharpness

To soften or sharpen the picture

_, Color Temp

To customize the RGB settings

6500 (recommended)

Native : To select the nature color tones of the

picture

(To show

the Main

Menu)

(To select the item)

_1_' '.. I01 .., _ sub-menu)

f'_'"'-'_-_._, (To enter the

r-_

(To go back last OSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

Audio OSD Adjusting Sound Quality

Treble It allows to adjust higher pitched sounds. Bass It allows to adjust lower pitched sounds. Balance It allows to adjust volume balance of the R/L speakers for

the best stereo reproduction.

Language Engmish, Fran_ais, Espa_ol There are three language formats available for program

broadcasting.

MTS (Multi-channel Mono, SAP, Stereo It allows to select the sound reception of stereo, bilingual

Television Sound) and mono programs between the TV Audio System. Mute On, Off It allows to mute the sound. Speaker On, Off It allows to turn On/Off the speakers of the TV when using

a Receiver or Home Theater System.

HDMI Audio Regular, External It allows to select the HDMI audio input source.

In this Setup Index, you can adjust the audio

settings to suit your personal preferences.

Treble

Decreases/Increases high pitch sounds.

Bass

Decreases/Increases low pitch sounds.

Balance

Adjusts volume to R/L speakers for the best stereo reproduction.

Language

There are three language formats available for program broadcasting. You may select from: English, EspaRol,

Frangais.

Mute

Mutes sounds.

Speaker

Turns TV speakers On/Off when using

Home Theater System.

HDMIAudio

It allows to select the HDMI audio input

source from the varied equipment.

(HDMI Source Only)

: input source from varied video

device External : input source from PC deivce

(To show (To select the Main the item) Menu)

Illl'£ i_7 % (To enter the............... sub-menu)

(To select the item)

(_7 (To enter the

.............. sub-menu) .............

[[_[[Z[[_] (To adjust (To select

the settings) the item) [-A-7-_-i..............

r-_

[ _,

(Togo back mastOSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

= ® * _ Q

In this Setup Index, you can adjust the audio

settings to suit your personal preferences.

[]

MTS

Toggles audio through Stereo, SAP and Mono.

Mono :

Selects Mono reception. (Uses to reduce noise during weak stereo

broadcasts)

SAP : Selects audio to Secondary Analog

Program. (If no SAP signal is present, the TV remains in Stereo Mode)

Stereo :

Selects Stereo reception when viewing a program.

(To show

the Main

Menu)

(To select the item)

, % (Toenterthe

•.....'.'_ L....; sub-menu)

(To select the item)

,0,1_=='<11_1111111111111111111111111111111111_

(Togo back last OSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

Screen OSD Adjusting Screen Modes

| ° e e • ° e_

Adjustment

H.Position

It allows you to adjust the picture position horizontally.

V.Position It allows you to adjust the picture position vertically.

Fine Tune It allows you to enhance the picture quality.

Aspect Ratio Aspect, Full Screen, It allows you to select the aspect ratio of the picture you

Panoramic, Zoom I, are watching.

Zoom 2, 1:1 Mode

Cropping On, Off (Off, Minimum, Once activating this function, the picture you are watching

Medium, Maximum) will be enlarged. Then its edges will be cropped

automatically.

Source Tuner, Composite, It allows you to select one of the picture or video sources

S-Video, Component, you want to view. HDMI, VGA, VGA-

Component

In this Setup Index, you can adjust the screen

settings to suit your personal preferences.

Adjustment (Analog Source Only) Adjusts the picture position and its

quamity.

H.Position : Moves the picture left and right in the

"Full Screen, Panoramic, and Zoom" modes.

V.Position : Moves the picture up and down in the

"Full Screen, Panoramic, and Zoom" modes.

Fine Tune : Enhances picture quality by reducing

horizontal flickering.

Auto Sync : Adjust the image to its best position and automatically displays on the screen.

> Aspect Ratio

It allows you to select the aspect ratio

of the picture you are watching.

Aspect : Toggles picture between 16:9 /4:3 aspect ratio.

I m:,

(To show (Toselect the Main the item) Menu)

_ (To enterthe

,.............. sub-menu)

(T° enter the (_/

............... sub-menu) ...............

[I._"[[_Z_'"] (To adjust the settings)[i'_'::_'i:i_':i

r-_

I I

(To go backlast OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

Full Screen : Enlarges a 4:3 picture to fill the 16:9

screen.

Panoramic : Enlarges a picture from 4:3 to 16:9 by

stretching it horizontally.

Zoom 1 :

Stretches the image both horizontally

and vertically.

Zoom 2 :

Stretches the image both horizontally

and vertically, which will lose part of the

image on both ends.

1:t Mode: Returns the image to its original mode.

Cropping

Crops image, and then enlarges it to fill the screen,

* For AI| Sources except Tuner Source :

Crops 16 pixels on R/L edge of image,8 lines on top/bottom edge of image, and

then enlarges it to fill the screen. On : (recommended)

Off :

* For Tuner Source :

Off :

Minimum (recommended) : To crop 16

pixels on the R/L edge of image, 8 lines on the top/bottom edge of image

Medium : To crop 24 pixels on the R/L edge of image, 16 lines on the top/bottom

edge of image

Maximum : To crop 32 pixels on the R/L edge of image, 24 lines on the top/bottom

edge of image

(Note: This feature helps remove any noise visible under both vertical and horizontal edges of the

image,)

(To show the Main

Menu)

(To select the item)

............... sub-menu)

(To enter the _'/_',

............... sub-menu) ",..!._L..,,'

[°_"7"'_" i (To adjust (To select

' ' the settings) theitem) [:_:[_-_:_:.

r -_._

[ _,

(To go backlast OSD Menu or exit OSD Menu)

(For AII of Sources

except

Tuner

SOUrCe)

(For Tuner

Source)

On Screen Displays (OSD)

In this Setup Index, you can select the input

source of the picture or video you want to view.

Main Picture Source

it allows you to view images from

optional video equipment connected to this unit by selecting the appropriate input source.

Tuner :

Composite :

S=Video :

Component :

HDMI :

VGA :

VGA=Component :

i a

(Toshow (To select

the Main the item)

Menu)

f_-"_-':-l_',' _ (Toenterthe

, I@1... sub-menu)

(To go back last OSD Menu or exit OSD Menu)

+_ On Screen Displays (OSD)

Setup OSD Adjusting Personal TV Settings

|+- ! e| • " |e

Favorite, Skip, Name Cable Standard, Air

Channel Setup

Auto Channel Search

ChannelAdd

Closed Caption

Analog Type

Digital Type Font

Size

Font Color

Background Color

Parental Control

Enter Password

It allows you to set up Channel functions. It can auto scan the available channels of the TV or CATV.

It allows you to add channels to your favorite channel list. It allows you to select the Closed Caption type shown on

the TV program. Off, CC1-4, T1-4 Off, CS1-6

As Broadcaster, Stypel-7 As Broadcaster, Large,

Medium, Small Black, White, Green, Blue,

Red, Cyan, Yellow, Magenta Black, White, Green, Blue, Red, Cyan, Yellow, Magenta

Rating On, Off MPAA Rating G/PG/PG-13/R/NC-17IX

Block Unrating On, Off

TV Rating TV-Y/TV-Y7/TV-Y7-FV

TV-G/TV-PG(V,S,L,D)/ TV-14(V,S, L, D) / TV-MA

(V,S,L)

Canada English Rating Canada French Rating

Channel Block Change Password

Timers Sleep It can be set to turn on / off the TV automatically at the set

time.

Date and Time It allows you to set the information of "Date and Time". Menu Timeout 10, 20, 30 It can be set to shut off the TV automatically after a preset

period of time has passed.

Language English, Fran_ais, Espafiol It allows you to set the OSD Menu language. DPMS On, Off TV and Backlight will shut off automatically when no video

source is detected when DPMS is active.

LED Settings On, Off It can be set to turn on/off the LED Light on the front panel

of the TV.

Factory Settings It can reset all parameters in OSD Menu Mode for all input

sources.

Factory Settings by Input It can reset all parameters in OSD Menu Mode for the

source you select currently.

Firmware Version You can see the firmware version here that installed in the

HDTV unit.

OnScreenDisplays(OSD)

][" . | fto fl " | . I | "

In this Setup Index, you can pre-search all

channels before watching the programs.

Auto Channel Search Will scan and preset all receivable

channels automatically.

Cable : Selects cable if using tuner as the input.

*Auto * Standard * HRC * IRC

Air : Selects air if using antenna.

(NOTE: The Auto Scan is set to scan cable TV channels by default, You

cannot receive and set the cable TV channels and VHF/ UHF channels at the same time.)

r -_

:, ,B.:Z:fl

(To show (To select the Main the item) Menu)

J_!_} (To enter the

............... sub-menu)

[A_.-/-___-_i(To select the item

_j (To enter the

............... sub-menu)

i_/[j (To selectthe item

{-,4 _ sub-menu)

', /_/ .,' (Toenterthe

!._.._..[.i (Toselecttheitem

i_'/ (To enter the

*,............... sub-menu)

[A !__j (To selectthe item

_i_/ (To enterthe

*,............... sub-menu)

[__,

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

In this Setup Index, you can edit channels to

suit your personal preferences.

Channel Setup

Will scan and preset all receivable channels automatically.

[]

Favorite : Selects and stores a list of favorite channels.

Browses through favorite channels by pressing Hotkey "FAVORITE".

,'__'_,+_ [f7 +i

, , ............

(To show (To select the Main the item) Menu)

(To enter the

............... sub-menu)

i_A__/_[_' (To select the item)

+ :,:)(To enter the

............... sub-menu)

LA.../.._.i (To select the item)

(_'/ (To enter the

.............. sub-menu)

[IA_I'_::_II (To selectthe item)

_(_ (To enterthe

............... sub-menu)

L__!_.[_i

(To select the channel)

+++©,

a__J

(To set up)

(To go back last QSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

Skips channels from viewing.

(NOTE: Once this function is set, the skipped channels will not be displayed

after searching. If you wish to view later, enter the channel number by pressing

the numeric keys on the remote control.)

(To show (To select

the Main the item)

Menu)

_. _/ ," (Toenterthe

sub-menu)

_:_ii_'_:i (To select the item)

,, /_I / (Toenterthe

sub-menu)

[A_/_[_, (To selectthe item)

_ {'._'/ i (To enter the

-............... - sub-menu)

[:_i'_'_.: i (To select the item)

(,'_ (To enter the

............... sub-menu)

L_.!!.,

(To select the channel)

r-_

(To set up)

(To go back last OSD Menu or exit OSD Menu)

._ On Screen Displays (OSD)

Name :

Creates a personal name for each channel.

(Name will appear in the upper-right corner of the screen)

(To show the Main

Menu)

[]

A/vi

(To select

the channel)

(To select the item)

(To enter the

sub-menu)

[-A--/-_-i (To seleotthe item)

_ "_--'_-_-_ sub-menu)

',. /0/.; (Toenterthe

_.../..._ i (To select the item)

(To enter the sub-menu)

[-_-._._-_._i (To select the item)

(To select the item) (To set up)

i__./____i_:_

(To go back last OSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

_;_ Channel Add

Adds channel currently on display to

the FAVORITE channel list.

I m

(To show (To select the Main the item)

Menu)

(To enterthe

............... sub-menu)

r_"7_T'i (To selectthe item

(To enter the sub-menu)

___=_z._:__[-A--7-T"(To selectthe item

(Keyin channel numberby pressingthe numerickey)

{,'_7 (To enter the

............... sub=menu)

i_/Ti (To select the item

i i

r-_q

[ _,

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

O _ Q _ Q • 0 O •

Displays the audio portion of a television

signal as text on the television screen.

> Analog Type

If there is Closed Caption data shown on

the analog TV channel, you can select your preferred Closed Caption type by scrolling through CC1-4, T1-4.

CC1 : is used for most programs CC2 : may be used for alternate languages

Text : is used for network and station information, such as channel guides,

schedules, or bulletin board, for Closed Caption programs.

Digital Type

Selects preferred Close Caption type by scrolling through CS1 - 6.

Font

Selects preferred font by scrolling

through As Broadcaster, Style I-7.

(Digital TVchannel only)

Size

Selects preferred font size by scrolling

through As Broadcaster, Large, Medium,

Small. (Digital TV channel only)

Font Color

Selects preferred font color by scrolling

through As Broadcaster, Black, White,

Green, Blue, Red, Cyan, Yellow, Magenta. (Digital TV channe/ only)

Background Color

Selects preferred background color by scrolling through As Broadcaster, Black, White, Green, Blue, Red, Cyan, Yellow,

Magenta. (Digital TV ehannel only)

(To show

the Main

Menu)

(To select the item)

,_ i_7 (To enterthe

............... sub-menu)

A / [.i (To select the item)

_, ('_'_ % (To enter the

............... sub-menu)

i',_7 (To enter the

...... ______,sub-menu) ...............

[1_1/_-.__:', (To select the item) iii:'Z:__:i

,'___'

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD) [

This function allows programs to be

restricted and controlled by parents.

Enter Password

Password is necessary to enter and re-enter the Parental Control Menu

screen.

(NOTE: The Factory Default password is "999999".)

Blocks programs based on programing rating system.

The TV Parental Control features by receiving the rating signal from your local broadcasting

station or cable service provider.

_;_ Rating

* On- To activate rating function * Off- To disable all of rating functions

r-_7_

,'= = =,, ,,,,UlUlUlUlUlUlU_P,. .['i"7"_'i...........

(To show (Toselect the Main the item) Menu)

,,"_;----Z',,

', /O/ ; (Toenterthe

sub-menu)

i,_/..._.[ (To select the item)

_ _'_ (To enter the............... sub-menu)

(Key in

pressing the numeric key )

I I

r-_

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

> MPAA Rating

Motion Picture Association of America provide movie ratings, including those

shown on TV.

G=: (General Audience) No restriction.

PG : (Parental guidance suggestion)

Children under 13 should be accompanied by an adult.

PG-13 : (Parents strongly cautioned)

Children under 13 should be accompanied by an adult.

=R: (Restricted) Viewers should be 17 or older.

NC-17 : (Not classified) Viewers should

be 17 or older.

X : (Adults only)

r -_

I__il

(To show (To select the Main the item)

Menu)

l (_.__i! (To enter the

sub=menu)

[i iZi i! Toso,oettho,tom

(To enter the

............... sub=menu)

LL/..[i (Toseleettheitem)

(_ (To enter the

............... sub-menu)

(To select the item)

(To set up)

a i

[_@_=,

(To go back last OSD Menu or exit OSD Menu)

TV Rating

U.S. TV ratings are for TV programs rated according to the U.S. Television

Parental Guidelines.

TV-MAIVlSIL : (Mature audiences only)

TV=141VlSILID : (Parents strongly

cautioned)

TV=PGIVlSILID : (Parental guidance

suggested)

!Y_Q : (General audience)

TV=Y7/FV : (Directed to children under

7 or older)

TV-Y : (Allchildren)

(NOTE: When you block the Iower rating,

the higher age-based ratings are blocked

automatically.)

Block Unrating

You may select "On" for MPAA Unrated and TV Unrating. This allows you to

block programs or movies that are broadcast without a rating.

To watch unrated channels, re-activate

MPAA Unrated and TV Unrating to "Off".

(NOTE: The unrated option is available only when you have selected U.S.A. as

your coun try/region.)

r -_

'L'___',@w__[i7_i...........

Tashaw (To select the Main the item) Menu)

(_'/ (Ta enter the

............... sub-menu)

R [_./.____i (Ta select the item

(Ta enter the

..[[[[[[[[o, SUb- m en u )

L_../_. i (Ta select the item

(_7 (Ta enter the

............... sub-menu)

I I

r-_

[ =,

(To go back last OSD Menu ar exit OSD Menu)

(Toselect the item)

(To set up)

On Screen Displays (OSD)

> Canada English Rating

It is available for TV programs in English broadcast in Canada.

C : (Intended for children under 8)

C8+ : (Generally considered acceptable for children aged 8 and older to watch

on their own)

G : (General Audience)

P G : (Parental Guidance) Parents may consider some content inappropriate for unsupervised viewing by children

aged 8=13.

14+ : (Not suitable for viewers under the age of 14)

18+ : (Adult)

NOTE: When you block the lower rating, the higher age-based ratings are blocked

automatically.

(To show the Main

Menu)

(To select

the item)

(To select the item)

(To enterthe

............... • sub-menu)

!__Z.__i (To selectthe item)

mi !_ _ (Toenterthe

,,,_..._,.._,, su b- m e nu )

i_/T i (To select the item)

(To enterthe

............... sub-menu)

r-_

(To setup)

(To go back last OSD Menu or exit OSD Menu)

Canada French Rating

It is available forTY programs in French

broadcast in Canada.

G : (Generam Audience)

8 ans+: (8+ General--Not recommended for young children under the age of 8)

: (Not suitabme for children

under the age of 13)

16 arts+ : (Not suitabme for children under the age of 16)

18 ans+: (Restricted to adults)

, [:(:?.::f:i

(To show (Toselect the Main the item)

Menu)

(To select

the item)

(To enter the

............... sub-menu)

i.A/,T.i (To select the item)

(To enterthe sub-menu)

[i_-Zi_i (To select the item)

To enterthe

sub-menu)

a i

_ =;,.q

[O,

(Togo back last OSD Menu or exit OSD Menu)

(To set up)

On Screen Displays (OSD)

Channel Block In this Setup Index, you may select the

blocked ratings to suit your personal preferences.

I m

:, [i Zf-!

(To show (To select the Main the item) Menu)

_ _7_i (To enter the

............... sub-menu)

i._../_..i (To select the item)

, /@/, (Toenterthe

sub-menu)

/ _j (To select the item)

m == I

r=_

(To enterthe sub-menu)

(To select the channel)

(To set up)

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD) I

> Change Password

You may change to a new preferred password by pressing the numeric key

within 6 numbers.

r -_

(To show (To select the Main the item)

Menu)

('._ (To enter the

.............. sub-menu)

['_'.'-/-]]_-]i (To select the item)

(To enterthe

............... sub-menu)

i._._._.i (To select the item)

_[_- Password" screen)

',. _/ ,,' (Toenter"Enter

(Key in password

pressing the numeric key )

(To confirm and then

enter"Enter New

............... Password" screen)

(Key in new

pressing the numeric key )

(Key in new password

again by

numeric key )

(To confirm and then

enter "Confirm New

............... Password" screen)

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

" O " ii . % e "

Date and Time

In this Setup Index, you can setup the

Date, Week, Time Zone, and Current Time on the TV.

Date : Date is set automatically when NTSC

source is used. (Manual adjustment is necessary however, if not used)

Day of Week : It will be automatically displayed according to the Date setting.

Time Zone : You can select available time zone

where you live.

Current Time :

Time is set automatically when NTSC source is used. (Manuam adjustment is

necessary however, if not used)

Adjust for Da_liqht Savinq Time : Option will be selected automatically based on settings above.

Auto Calibration : Once activating this function, the information

of "Date and Time" will be corrected automatically based on accurate time.

NOTE: Once marking the "Auto

Calibration °'setting, all settings shown

on the "Date and Time" screen will be invalid.

r _._

I___ I

(Toshow (To select the Main the item)

Menu)

) (To enter the

•.[[[[[[[[[[[[[** sub-menu) i_$_/_., (To selectthe item)

(To enter the

............... sub-menu)

(i_[[) (To enter the sub-menu

L__!.L

(Tocycle selecting)

(To confirm)

[_O_,

(To go back last OSD Menu or exit OSD Menu)

On Screen Displays (OSD)

" o | " || "

Timers

In this Setup Index, you can setup the

Sleep Time on the TV.

Sleep :

Shuts offTV after a preset period of time has passed by scrolling through 30, 60, 90,120 minutes.

Menu Timeout

In this Setup Index, you can setup the OSD Menu display time before

disappeared when no action is taken.

(To show

the Main

Menu)

(To select the item)

,./@/,, sob-menu)

i_/ (To enter the

............... sub-menu) ...............

[i_:'/_'_:i (To seJect the item) [_:]_._'._:i

'_D ,lJ

_@,

(To go backiast OSD Menu or exit OSD Menu)

OnScreenDisplays(OSD)

Languages

There are three language formats available for the OSD Menu. You may select it doing the following:

English, Frangais, Espa_ol.

DPMS

TV and Backlight will shut off automatically when no video source

is detected when DPMS is active,

* On- To activate this function * Off- To disable this function

= = I _ i|

LED Settings

It can be set to turn on / off the LED Light on the front panel of the TVwhen shutting

off the TV.

* On- To activate this function * Off- To disable this function

. i III _ . IIo ®

Factory Settings

You can reset all OSD settings to original manufacture settings for all input sources,

> Factory Settings by Input

You can reset all OSD settings to original manufacture settings for the source you select currently.

Firmware Version

You can see the firmware version here that installed in the HDTV unit.

r -_

i i

(To show (To select the Main the item)

Menu)

% (To enter the

,.............. sub-menu)

iA/vi

(To select

the item)

_, r-_&_

[__,

(Togo back last OSD Menu or exit OSD Menu)

ifications

TFT LCD Panel

Panel Size Aspect Ratio

Pixels Dynamic Contrast Ratio

H/V(ViewAngle) Gray to Gray Response Time

PC Compatible Frequency

26" (Side Speaker)

16:9 1366X768 800:1

160,, (H)/150 o (V) 8ms

30~85KHz(H)/ 50~80Hz(V) Max.1360x768@60Hz

Video Compatibility DTV & HDTV Compatibility

Aspect Ratio Adjustment

3D Comb Filter 3 : 2/2:2 Pull Down

Digital Noise Reduction Adjustable Color

Temperature De-interlacer Y VGAAuto Frequency y

Correction

YTV Auto Frequency

Detection

32" (Side Speaker)

16:9 1366X768 1600:1

178o (H)/178 o (V)

8ms

30~85KHz(H)/50~8OHz(V) Max.I360x768@6OHz

NTSC/ATSC

480i, 480p, 720p, 1080i

Zoom, FullScreen,4:3,1:1,

Panoramic

Y Y

Native,6500

Auto Sound Level Control Y Output Watt 2 (10W + 10W)

Sound Effect MTS (Mono I Stereo / SAP)

TV Tuner Combo RF (NTSC/ATSC) Tuner xl Video Input Composite (CVBS) xl, S-Video xl, YIPblPr, YlCblCrxl, R/Lx3 HDTV & Video Input VGA/Component xl, HDMI xl, R/L x2

Service Port RS232C Port (Mini DIN 8 Pins) xl, Firmware Upgrade Port (AType) xl

Audio Output Output : Earphone, R/L xl

* NOTE : Product Specification is Subject to Change without Notice.

TFT LCD Panel

Power (Voltage)

(Power Consumption) Stand-by

Dimensions (W x D x H) Carton Dimensions (W x D x H)

Weight w/stand

Gross Weight

100-240 VAC / 50-60 HZ 161 W

<lW

30.7 in x 7.56 in x 18.5 in

32.68 in x8.81 in x 21.85 in

23.8 Ibs

29.11 Ibs

.... _ _ .........

100-240 VAC / 50-60 Hz 164W

<lW

37.76 in x 9.37 in x 22.20 in

42.80 in x 12.40 in x 25.35 in

35.5 Ibs

45.4 Ibs

Dimensional Drawing

....._..... Size A B C D E F

Model ...........

26" 17.59 in 38.78 in 17.32 in 7.56 in 18.50 in 4.10 in

32" 20.67 in 37.76 in 23.58 in 9.37 in 22.20 in 4.92 in

" g Mode for VGA and HDMI(PC

YPbPr 480p

720p 1080i

VGA 640x480

800x600

1024x768

1280x768 1360x768

HDMI(PC) 640x480

800x600 1024x768

1280x720 1280x768 1360x768

59.94 60 30 60

75 60

75 60 75 60

60 60 75 60

60 75 60

60 60

els Policy

SyntaxBrillian's D.O.A. Policy for LCD HDTVs for Defective Pixels on LCD Panels

(Applicable to the LCD HDTV sold within USA & Canada only)

LCD HDTVs are evaluated at a distance of approximately 50 centimeters

(approximately 20 inches) between the LCD panel and the eyes of the user at a 90 degrees viewing angle. All LCD panels have been tested to ensure they comply with our factory standards. Our evaluation is based on the number of

defective pixels and the distance between any two defective pixels. Bright dots are dots that appear bright and unchanged insize when a LCD HDTV screen

displays under a black pattern; dark dots are dots that appear dark and

unchanged in size when a LCD HDTV screen is displayed under pure red, green, or blue patterns ("defective pixels"). Adjacent dots are dots located directly

next to each other.

Customers are required to check their LCD panel immediately after purchase. To identify defective pixels, the LCD panel should be examined under normal

operating conditions as mentioned above, preferably in its native display

resolution, and with a90 degrees viewing angle.

A LCD HDTV will be considered dead on arrival (D.O.A.) with regards to defective

pixels on the LCD panel when any one of the following criteria is met:

_ Atotal of 7 defective pixels including both bright dots and dark dots are

present (the typical 30" LCD Television screen has 1million pixels), or

_ 2 or more pairs of adjacent bright dots are present, or _ 3 adjacent bright dots are present, or

_#3 adjacent dark dots are present.

Inview of customers' concerns about dead pixels, SyntaxBrillian would like to address that defective pixels are not ultimately avoidable with the current LCD industry

standard panel manufacturing processes. We always strive to improve our technology and minimize the chance of occurrence of defective pixels by applying strict screening

processes in our factory production processes.

However, SyntaxBrillian cannot guarantee that a return unit to our customers will be

100% free of defective pixels.

For questions, please call our toll free service number in the USA at 888-Syntax-Brillian-8.

"At Syntax-Brillian Corporation, a satisfied customer is our

most important focus."

3:2 pull down = Process of converting 24 frames per second film to video by repeating one film frame

as three fields, then the next film frame as two fields.

1 1 1 2 2 1 1 1 2 2

480I = 480 lines of display every 1/60 of a second; image is displayed by interlace scanning. See

also Interlaced

4BOP = 480 lines of display every 1/60 of a second; image is displayed by progressive scanning, See

also Progressive.

720P - 720 lines of display every 1/60 of a second; image is displayed by progressive scanning, See

also Progressive,

1OBBI = 540 lines of display x 2 every 1/30 of a second; image is displayed by interlace scanning,

Olevia 2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual