OLEO MLB 13, MLB 16, MLB 20, MLB 18, MLB 25 Installation Manual

MLB SERIES INSTALLATION GUIDE

ELEVATOR BUFFERS

MLB 13-32

INSTALLATION GUIDE

ENGLISH

MLB 13-32 BUFFERS : INSTALLATION INFORMATION

SCOPE OF DELIVERY

Oleo buers are supplied with a standard finish suitable for dry conditions

(finished Oleo Green primer). The standard finish is not suitable for wet,

corrosive conditions.

Oleo MLB buers can be supplied pre-filled with oil, or without oil.

Check the buer to confirm it is pre-filled or without oil.

Should there be any discrepancies contact Oleo International before proceeding.

INDICATION OF USE

Environmental temperature acceptable conditions -15°C to 70°C.

WARNING

!

The Oleo MLB elevator buer is supplied containing compressed gas; the plunger is held in

the fully compressed condition during transportation by means of a bolt, this should not be

removed until the buer is in its final installed position.

2

HANDLING

When handling MLB buers ensure your regional health and safety laws are adhered to.

Figure 1

WARNING

!

DO NOT lift buer with the striker

shown in Figure 1. Avoid contact as

this may cause damage.

Always confirm the weight of the buer

to be lifted and ensure that a suitable

lifting method is used.

3

BUFFER WEIGHTS

4

MLB 13-32 Range

Buer Model

Without Oil

Kg

Lbs

When Filled with Oil

Kg

Lbs

MLB 13

9.810

21.63

10.10

23.61

MLB 16

11.15

24.58

12.39

27.32

MLB 18

12.67

27.93

14.01

30.89

MLB 20

15.02

33.11

16.94

37.34

MLB 25

21.05

46.41

23.97

52.85

MLB 32

29.72

65.52

34.29

75.59

4