OKOIA OB200 User Manual [nl]

148*210mm

OB200

ELECTRIC BLANKET

COUVERTURE CHAUFFANTE

ELEKTRISCH WARMTEDEKEN

WARNINGS

Important instrucons. Retain for future use.

This appliance is intended for domesc
household use only and should not be
used for any other purpose or in any other
applicaon, such as for non-domesc use
or in a commercial environment.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilies or lack of experience and
knowledge if they have been given
supervision or instrucon concerning use
of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
For the details concerning the method of
cleaning, please see secon “Cleaning and

maintenance” on page 8.

Read the instrucons.

Do not insert pins.

Not to be used by very young
children (0-3 years).

Do not use folded or rucked.

Hand wash

The appliance is an overblanket.
The appliance is only to be used with the
types of detachable control unit or
detachable transformer that is marked on
the appliance.
When not in use, store as follows.
When storing the appliance, allow it to
cool down before folding.
Do not crease the appliance by placing
items on top of it during storage.

Examine the appliance frequently for signs
of wear or damage. If there are such signs,
if the appliance has been misused or does
not work, return it to the supplier before
switching it on again.
This appliance is not intended for medical
use in hospitals.

Do not use if wet.
This appliance must not be used by

persons insensive to heat and other very
vulnerable persons who are unable to
react to overheang.
Children under the age of three are not to

guardian, or unless the child has been
adequately instructed on how to operate
the controls safely.
When the appliance is likely to be used for
an extended period, for instance by the
user falling asleep, controls should be
adjusted to a seng recommended for
connuous use.
The switch or control unit must not be
allowed to get wet during washing and
that during drying the cord must be
posioned to ensure that water does not

flow into the switch or control.
use this appliance due to their inability to
react to overheang.
The appliance should not be used on a an
adjustable bed.
Check that the blanket and cord do not
become trapped or rucked, for example in
hinges.
The appliance is not to be used by young
children over the age of three unless the
controls have been pre-set by a parent or

• Do not dry clean.

• Do not iron.

• Do not tumble dry.

• Do not bleach.

• Machine wash, Permanent press.
Inial water temperature should
not exceed 30°C.

30

IMPORTANT SAFETY INSTRUCTIONS

When using your appliance, in order to reduce the risk of fire,
electrical shock, and/or injury to persons, basic safety
precauons should always be followed, including the following:

• Only use the appliance as an OVERBLANKET – Do NOT use it as
an underblanket.

• Keep the power supply cord and control outside the bed.

• Only use the controller provided.

• Do not cover the controller.

• Do not coil or lay the lead on the overblanket.

• Keep the overblanket flat during use.

• Do not use a hot water bole when using the overblanket.

• Do not switch the power on if the overblanket is in a folded
state.

• Switch off the overblanket and remove the plug from the mains
socket when you are going out or not using the overblanket.

• Regularly inspect the supply cord, plug, controller and

OVERVIEW

Controller

Mains power cable connector

Mains power cable

Overblanket

Overblanket connector

Controller

overblanket for any damage. If damage is found, immediately
stop using of the overblanket.

• Should you have any concerns about health issues, consult your
doctor before using the overblanket.

• If you experience any pain or discomfort while using the
appliance, stop using it immediately.

Display
Auto-off indicator light

Heat setting button

Power On/Off button

OPERATION

This overblanket is intended for warming the human body. It may
only be used as a cover.

1. Connect the power cable
connector to the overblanket
connector.

• Ensure the connector is
pushed home unl
the locking catch engages.

Locking catch

2. Plug the controller into the closet mains socket and press
to turn on the appliance.

• The display will show 1, indicang the heat seng is 1.

Preheang the bed

3. Repeatedly press on the controller to select the desired
heat level.

DO NOT SLEEP WITH THE OVERBLANKET ON THE PREHEAT SETTING.

• Heat sengs:

The number shown on the display

1-2

3-4

Heat level

Low heat

Medium heat

• Safety Timer: The appliance has a built-in mer and will
automacally switch off aer 3 hours. The auto-off indicator
light will illuminate.

• To switch back on the appliance, first press and then
repeatedly press on the controller to select the desired
heat level.

CLEANING AND MAINTENANCE

Switch off and remove the controller from the overblanket
before cleaning.

The power cable must NEVER come into contact with water.
It is recommended to wash the overblanket only if it becomes
dirty or dusty.
Before using the overblanket, make sure it is completely dry.

Machine washing

The overblanket may be washed on the Delicate Wash seng of
washing machine at a maximum temperature of 30°C.

Drying

Hang the overblanket to air dry naturally in a horizontal posion
unl completely dry.
Do not expose to direct sunlight.
Do not dry with a hair dryer or heater.

Maintenance

Examine the overblanket regularly to check that there are no
signs of wear or damage. If any damage/wear is spoed, do not
use the overblanket and seek specialist advice. If the mains lead
or controller is damaged, do not open or aempt to repair them
as they must be serviced by a qualified person.

5-6

• It is recommended to set the heat level to medium or high
level for 1 to 2 hours before sleeping on the bed and then
you can set the heat level to the low level or turn off the
appliance.

4. When the overblanket is not in use, switch off the controller
and then remove the plug from the mains socket.

High heat

Storage

When not in use, allow to cool and dry then fold neatly but not
ghtly (or roll) in the original packaging without sharp bends in
the heang element.
Store where no other objects will be placed upon it in a cool dry
place.