
Issue Departm
ent:Bedding Division Date:
2017-8-15
System
Instruction
Instruction of RF3022A
Instruction of RF3022A
Author:
ion:
Edit
Page
1.1
1 of 7
Figur
e1buttonofremote
1/7

Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022A
Author:
Edition:
Page 2 of 7
1. Item
2.1 ZG button(button 1 in figure 2)
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.1
2.2 M1 nitton(buttton 2 in figure 2)
Click M1 button, actuators move to M1 position, stop when click any button during
movement;
Press and hold M1 button for 5s, timer LED of remote flashes, the control box records current
position as M1 position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2.3 AntiSnore button(button 3 in figure 2)
Click
AntiSnore
during movement;
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
button, actuators move to
AntiSnore
AntiSnore
button for 5s, timer LED of remote flashes, the control box records
position;
AntiSnore
position, stop when click any button
2.4 TV/PC button(button 4 in figure 2)
Click
TV/PC
movement;
button, actuators move to
TV/PC
2/7
position, stop when click any button during

Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022A
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
TV/PC
TV/PC
button for 5s, timer LED of remote flashes, the control box records
position;
Author:
Edition:
Page 3 of 7
2.5 M2 button(button 5 in figure 2)
Click M2 button, actuators move to M2 position, stop when click any button during
movement;
Press and hold M2 button for 5s, timer LED of remote flashes, the control box records current
position as M2 position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.1
2.6 LOUNGE button(button 6 in figure)
Click
LOUNGE
during movement;
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
button, actuators move to
LOUNGE
LOUNGE
button for 5s, timer LED of remote flashes, the control box records
position;
LOUNGE
position, stop when click any button
2.7 Lumbar actuator(button 7 in figure 2)
Press and hold LUMBAR UP button of remote, lumbar actuator moves out, stop when released;
2.8 Childlock button(button 8 in figure 2)
In unlocked state, press and hold the childlock button, the red backlight of children lock
button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked
state;
Under locked state, press any button except childlock button, the red backlight of childlock
turns on, the button you pressed is invalid;
3/7

Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022A
Under locked state, press and hold childlock button, red backlight of childrenlock begins to
flash,after 5s, the red backlight stops flashing, remote enters into the normal working
condition;
Author:
Edition:
Page 4 of 7
1.1
2.9 moving in of lumbar actuator(button 9 in figure 2)
Press and hold
released;
LUMBAR UP buton of remote
, lumbar actuator moves out, stop when
2.10 Reset all memory positions to default settings(button 1 and 16 in figure 2)
Pressa and hold ZG+FLAT buttons
remote flashes, the control box reset all memory positions to default settings;
(button 1 and 16 in figure 2)for
5s, timer LED of
2.11 Head up(button 10 in figure 2)
Press and hold
released
;
HEAD UP button of remote, head actuator moves out, stop when
2.12 Head down(button 13 in figure 2)
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released;
2.13 Foot up(button 12 in figure 2)
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
2.14 foot down(button 15 in figure 2)
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released;
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
2.15 moving out of tilt actuator(button 11 in figure 2)
Press anfd hold TILT UP button, tilt actuator moves out, stio when released;
4/7

Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022A
Author:
Edition:
Page 5 of 7
2.16 moving in of tilt actuator(button 14 in figure 2)
Press and hold TILT DOWN button,, tilt actuator moves in, stop when released;
2.17 Flat(button 16 in figure 2)
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat;
2.18 Massage head(button 17 in figure 2)
1.1
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3;
2.19 Massage timer(button 18 in figure 2)
If the massage motors do not work, the button is invalid, if the massage motors work, click the
button to switch the massage time, when massage time switch to 0, turn off the massage;
2.20 Massage ON/LAST(button 19 in figure 2)
Click the Massage ON / LAST button, if the massage motors are on, turn off the massage motors
record the current massage intensity and mode of head and foot massage motors. If the
and
massage motor is off, turn on the massage motors and restore to the previous recorded massage
intensity and massage mode (Note: Only when press the ON / LAST button only to turn off the
massage motor, it will record the current massage intensity and massage mode, press the head and
foot massage motor button or timer button or open the massage motor, it will not not record the
status of massage motors);
2.21 Massage ON/OFF(button 20 in figure 2)
Click
Massage ON/OFF
motors,if massage motors are off, then it turns on the massage motors;
button, if the massage motors are on, then it turns off massage
5/7

Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022A
Author:
Edition:
Page 6 of 7
1.1
2.22 Under bed light(button 21 in figure 2)
Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;
2.23 Massage Type(button 22 in figure 2)
Click massage type button, to switch the massage mode og massage motors, massage mode
switches among type0type1type2type3type0; this button can only switch the massage
mode, it can not open massage motors;
FCC
Warning:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada
licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts
de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour
fac un autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de
l'exposition aux rf.
doit pas produire de brouillage, et
6/7

JL DP .1 4. 02 7. 0 00
JL DP .1 0. 02 3. 0 00
JL DP .0 5. 03 2. 0 00
R5 .2 16 .0 1. 01 5 C
RF3022A
FCC ID: PCU-RF3022A
IC:21319-RF3022A
R5 .5 04 .0 1. 25 0
R5 .2 17 .0 1. 01 6
R5 .4 13 .0 1. 00 5
CB .1 3. 42 .0 1
FCC ID: PCU-CB1342
IC:21319-CB1342
R5 .4 10 .0 1. 00 9
JL DQ .1 6. 22 8.3 1
R5 .1 13 .0 0. 01 1
JL DQ .9 .0 01 .1 3 0C
Head Motor
Lumbar Motor
Tilt Motor
Massage Motor
Massage Motor Cable
Power Supply
cord of Power
Power Cord AC
Patch cord of LED strip/LED
Underbed lighting /LED
USB Chager/ USB
Double USB socket
22keys Remote Model /22
product name
Foot Motor
Control Box
Y-Cable
B. 15 05 5
Product code
RF3022A
number
JL DQ .1 6. 26 3.8 4
B. 11 96 4
7/7