Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022
Instruction of RF3022
Author:
Edition:
Page 1 of 7
1.1
Figure1buttonofremote
1/7
Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022
Author:
Edition:
Page 2 of 7
1. Item
2.1 ZG button(button 1 in figure 2)
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.1
2.2 M1 nitton(buttton 2 in figure 2)
Click M1 button, actuators move to M1 position, stop when click any button during
movement;
Press and hold M1 button for 5s, timer LED of remote flashes, the control box records current
position as M1 position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2.3 AntiSnore button(button 3 in figure 2)
Click
AntiSnore
during movement;
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
button, actuators move to
AntiSnore
AntiSnore
button for 5s, timer LED of remote flashes, the control box records
position;
AntiSnore
position, stop when click any button
2.4 TV/PC button(button 4 in figure 2)
Click
TV/PC
movement;
button, actuators move to
TV/PC
2/7
position, stop when click any button during
Issue Department:Bedding Division Date:
2017-8-15
System Instruction
Instruction of RF3022
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
TV/PC
TV/PC
button for 5s, timer LED of remote flashes, the control box records
position;
Author:
Edition:
Page 3 of 7
2.5 M2 button(button 5 in figure 2)
Click M2 button, actuators move to M2 position, stop when click any button during
movement;
Press and hold M2 button for 5s, timer LED of remote flashes, the control box records current
position as M2 position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.1
2.6 LOUNGE button(button 6 in figure)
Click
LOUNGE
during movement;
Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
button, actuators move to
LOUNGE
LOUNGE
button for 5s, timer LED of remote flashes, the control box records
position;
LOUNGE
position, stop when click any button
2.7 Lumbar actuator(button 7 in figure 2)
Press and hold LUMBAR UP button of remote, lumbar actuator moves out, stop when released;
2.8 Childlock button(button 8 in figure 2)
In unlocked state, press and hold the childlock button, the red backlight of children lock
button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked
state;
Under locked state, press any button except childlock button, the red backlight of childlock
turns on, the button you pressed is invalid;
3/7