OKIN Refined Electric Technology RF29 Users manual
Instructions ofRF29
1 appearance
2 Keyfunction
Key value Specification
PAIR
HEAD UP
HEAD DOWN
FOOT UP
FOOTDOWN
press and hold and button ,the remote enters
pairing mode
Press and hold button, head actuator moves out, stop
when released
Press and hold button, head actuator moves in, stop when
released
Press and hold button, foot actuator moves out, stop
when released
Press and hold button,foot actuator moves in, stop when
released
HEAD UP&FOOT UP
Press and hold button, head actuator and foot actuator
moves out, stop when released
HEAD DOWN&FOOT
DOWN
FLAT
ZG
ANTI SNORE
TV/PC
FLASH LIGHT
Press and hold button, head actuator and foot actuator
moves in, stop when released
Press and hold button, the bed goes flat
Click button, the bed moves to zeroG position, press and
hold zeroG button for 5s, until backlight flashes, the control set
the current position as zeroG position
Click button, the bed moves to antisnore position, press
and hold antisnore button for 5s until backlight flashes, the
control set the current position as antisnore position
Click button, the bed moves to TV/PC position, press
and hold TV/PC button for 5s, until backlight flashes, the
control set the current position as TV/PC position
Click button, open or close flash light
FCC Warning：
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada
licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this
devicemay not cause interference, and (2) this device must accept any interference,
includinginterference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de
licence.
L'exploitation est autorisée aux deux condi tions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage
est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un
autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux rf.