OKIN Refined Electric Technology RF28 Users manual

Issue Department： Date：

2018.11.15

1 Key description

1.1 appearance

2.5 Head up

System Instruction

Instruction of RF28

Instruction of RF28

Author：

Edition：

Page 1 of 4

1.1

2.6 Head down

2.2 AntiSnore button

2.3 Memory A button

2.7 Foot up

2.10 Under bed light

2.1 ZG button

2.9 Flat

2.8 Foot down

Figure1buttonofremote

1/4



Issue Department： Date：

2018.11.15

System Instruction

Instruction of RF28

Author：

Edition：

Page 2 of 4

2 Key description

2.1 ZG button

Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of movingto memory positions, the head and foot actuatorsmove first,
then the tilt and lumbar actuators move;

1.1

2.2 AntiSnore button

Click AntiSnore button, actuators move to AntiSnore position, stop when click any b utton
during movement；

Press and hold
current position as
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;

AntiSnore button for 5s, timer LED of remote flashes, the control box records

AntiSnore position;

2.3 Memory A button

Click MA button, actuators move to MA position, stop when click any button during
movement；
Press and hold MA button for 5s, timer LED of remote flashes, the control box records current
position as MA position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;

2.4 Reset all memory positions to default settings

Pressa and hold ZG+FLAT buttonsfor 5s, timer LED of remote flashes, the control box reset
all memory positions to default settings；

2/4

Issue Department： Date：

2018.11.15

System Instruction

Instruction of RF28

Author：

Edition：

Page 3 of 4

1.1

2.5 Head up

Press and hold HEAD UP button of remote, head actuator moves out, stop when

released；

2.6 Head down

Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；

2.7 Foot up

Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;

2.8 Foot down

Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head

andfoot actuators start moving;

2.9 Flat

Click FLAT button, the bed goes flat, stop when click any button during the process of going flat；

2.10 Under bed light

Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;

3/4

Issue Department： Date：

2018.11.15

System Instruction

Instruction of RF28

Author：

Edition：

Page 4 of 4

1.1

FCC Statement ：

Any Changes or modifications not expressly approved by the
could void the user’s authority to operate t he equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.

party responsible for compliance

ISED RSS Warning:

This device complies with Innovation

exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de

licence.L'exploitation est autorisée aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement.

ISED RF exposure statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled

environment.The device has been evaluated to meet general RF exposure requirement.

Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un

autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux

rf.

, Science and Economic Development Canada licence-

4/4

FCC ID: PCU-RF28
IC: 21319-RF28

FCC ID: PCU-CB1220
IC: 21319-CB1220