OKIN Refined Electric Technology JLDK3706 User Manual

嘉兴礼海电气科技有限公司

OKIN Refined Electric Technology Co., Ltd

Operating Manual of Remote Control system 遥控系统使用说明书

1、 Interface of the remote control

遥控器界面

2、Button description 按键功能描述

A. HEAD UP button：Press and hold the button, the Head actuator will go up. Stop

when released.

一直按下，头部驱动器下降，松开即停止；

Page 1 of 5

嘉兴礼海电气科技有限公司

OKIN Refined Electric Technology Co.,Ltd

B. HEAD DN button：Press and hold the button, the Head actuator will go down. Stop

when released.

一直按下，头部驱动器上升，松开即停止；

C. FOOT UP button：Press and hold the button, the Foot actuator will go up. Stop

when released.

一直按下，脚部驱动器下降，松开即停止；

D. FOOT DN button：Press and hold the button, the Foot actuator will go down. Stop

when released.

一直按下，脚部驱动器上升，松开即停止；

E. HEAD & FOOT UP button：Press and hold the button, the Head and Foot actuator

will simultaneously go up. Stop when released.

一直按下，头部驱动器和脚部驱动器同时下降，松开即停止；

F. HEAD & FOOT DN button：Press and hold the button, the Head and Foot actuator

will simultaneously go down. Stop when released.

一直按下，头部驱动器和脚部驱动器上升，松开即停止；

3、Wireless pairing operation
Step1: put in the batteries.
Step2: Power on the control box.
Step3: Double click the code pairing button on the control box, and then release it, the pairing
instruction LED on the control box lights. The control box is in a state to be paired.
Step4: Press simultaneously the Head-Up button and the Foot-Up button on the remote control,
when the backlight LED on the remote flashes. release these two buttons, if the backlight LED
still flashes, it represents that the remote is searching for paired control box. The pairing LED on
the control box to be paired is always bright. When the backlight LED on the remote and LED on
the control which is to be paired stop flash. The code pairing is finished. To test whether the
code pairing is successful, or to test other relevant button of actuator such as the Head-Up
/Down button and the Foot-Up/Down button. If you can hear the “tick” sound of relay, the code
pairing is successful. Otherwise, repeat all the processes above steps.

It is strongly recommended that the near control boxes, for example, in a same house, should

Page 2 of 5