Okina USA WDEDX-768AI-VD, WDEDX-761AI-VD User Manual

WDEDX-768AI-VD

680 TVL

WDEDX-761AI-VD 610 TVL

Hyper WD Vandalproof Camera - Effio WDR

User Manual

Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference.

100712-XE324FG-V2

Safety Warnings

1. Read this manual carefully before installing the unit

Please read this manual first for correct installation and operation.

2. Never install the camera on a ceiling that cannot hold its weight

The product may fall down and cause damages.

3. Never install the camera near electric or magnetic fields

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers since the magnetic fields generate from above devices would distort the video image.

4. Never install or use the camera in areas exposed to water, oil or gas

The water, oil or gas may result in operation failure, electric shock or fire. Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location.

5. Never face the camera toward the sun

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

6. Power Cord Protection

Touching the wet power cord with hands or touching the power cord with wet hands may

result in electric shock. Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them, playing particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

7. Attachments

Do not use attachment not recommended by the product manufacturer as they may cause hazards.

8. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the product.

9. Do not operate the camera in environments where the temperature,

humidity or power source is beyond the specified ones

Use the camera in suitable environments where the temperature is within -10°C~50°C and humidity below 90%. Use the input power source as the specifications listed.

10. Cleaning

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

11. Never disassemble the camera nor put impurities in it

Disassembly or impurities may result in trouble or fire.

12. Stop using when the product emits smoke or abnormal heat

13. Servicing

Do not attempt to repair this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

14. Retain Instructions

THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE.

Warranty

OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut

The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of the warranty.

NOTE:

The information in this manual was up-to-date when published. The manufacturer reserves the

right to revise and improve its products. All specifications are therefore subject to change without

notice.

Table of Contents

1. INTRODUCTION .............................................................................................................................. 1

1.1 MAIN FEATURES ............................................................................................................................ 1

1.2 CONTENT LIST ............................................................................................................................... 1

1.3 SPECIFICATIONS ..................... ....................................................................................................... 2

2. CAMERA OVERVIEW ............................................................................... ....................................... 3

2.1 DIMENSIONS ................................................................................................................................. 3

2.2 DESCRIPTION OF CAMERA PARTS .................................................................................................... 4

3. OSD OPERATION ............................................................................................................................ 5

3.1 OSD CONTROL BUTTONS .............................................................................................................. 5

3.2 OSD OPERATION .......................................................................................................................... 6

4. CONFIGURATION ............................................................................................................................ 7

4.1 LENS ............................................. ................................ ................................ .............................. 7

4.2 AGC ............................................................................................................................................ 8

4.3 WDR ........................................................................................................................................... 9

4.4 WHITE BALANCE CONTROL ............................................................. ......................................... 11

4.5 2D &3D NR (DYNAMIC NOISE REDUCTION) ..................................................................... .............. 13

4.6 DAY/NIGHT .......................... ......................................................................... ............................ 15

4.7 SHUTTER ................................................................................................................................. 19

4.8 IMAGE ...................................................................................................................................... 21

4.9 EFFECT .................................................................................................................................... 22

4.10 SYSTEM ................................................................................................................................. 25

4.11 EXIT ........................................................................................................................................ 27

1. Introduction

WDEDX-768AI-VD and WDEDX-761AI-VD are built with Sony’s latest image processor,

this hyper-wide dynamic camera has the capability of achieving resolutions of over 680 TVL or 610 TVL respectively. The features include 2-D and 3-D noise reduction, sense up, spot removal, strong-light suppression, intelligent motion detection, face detection and OSD functions. WDEDX-768AI-VD and WDEDX-761AI-VD also comes with 510x / 256x digital zoom, an intelligent auto exposure compensation system. WDEDX-768AI-VD and WDEDX-761AI-VD reproduces nearly perfect images like no other.

1.1 Main Features

WDEDX-768AI-VD

 Color: 680 TVL, B/W: 700 TVL  Powerful 510x WDR (54dB)

WDEDX-761AI-VD

 Color: 610 TVL, B/W: 630 TVL  Powerful 256x WDR (53dB)

 1/3" Hyper Wide Dynamic Color Camera, Effio WDR DSP  Color:0.1Lux@F1.2, B/W:0.08Lux@F1.2, Sense-up: 0.0001Lux@F1.2  Multi-Language OSD Control  Ideal for Backlight Environments  2D/3D Noise Reduction & Sense Up(512x) Functions  Shutter Mode (SCHEDULE / DAY&NIGHT)  Face Detection of up to 4 faces  E-zoom Function (1~256x)  Advanced Motion Detection Function  Polygonal Mosaic Privacy Mask / Freeze / Timer Clock  Water Resistance: IP66 ; Breaking Strength: 656.1Kgf  Built-in Varifocal Lens & Unique 3-Axis Gimble Mechanism  12V DC / 24V AC, 3.0W

1.2 Content List

 One (1) WDEDX-768AI-VD or WDEDX-761AI-VD camera with video/power cable

 Two (2) Mounting Screws  One (1) DC Male Connector  One (1) Cleaning Cloth  One (1) Warning Sign Sticker  One (1) User Manual  One (1) CD

* For any returns, please include all components listed above with original packaging in Resalable Condition

missing/damaged or if any cable is cut or tampered with.

. Absolutely No Returns will be accepted if any component is

1.3 Specifications

PIC D-227 D-228 Model WDEDX-768AI-VD WDEDX-761AI-VD Image Sensor 1/3" Sony Double-speed (Double-density) CCD

Number of Total Pixels

Resolution

Minimum Illumination

Wide Dynamic Range 510x Normal Camera (54dB) 256x Normal Camera (53dB) Video Output 1.0Vp-p Composite, 75Ω (BNC) / Internal RCA for Service Monitor Signal to Noise Ratio More than 52dB (AGC off, Weight on) Gamma Correction 0.45 Menu OSD Control Title TITLE (LOCATION) Synchronizing System INTERNAL Digital Day&Night Mode COLOR / B&W / AUTO / SCHEDULE

Electronic Shutter

Automatic Gain Cont r ol AUTO / MANUAL / OFF

White Balance

Back Light Compensation WDR / BLC / OFF Flickerless ON / OFF Dynamic Noise Reduction 3D / 2D Sense Up AUTO (Limit x2~x512) / OFF Face Detection 4 Face Detection

Language

E-Zoom x1~x256, Pan / Tilt Adjustable

Motion Detection ; Privacy

Timer Clock Year / Month / Date, Hour / Minute / Second Automatic IRIS ; Connector DC Lens Mount Built-in DC Auto IRIS Lens

Lens, Angle of View(H)

Water Resi s tance IP66 Max Breaking Strength 656.1kgf

Power Input ; Consumption

Operation ; Storage Temp. 14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C Operation ; Storage Humidity Maximum: RH80% ; RH90% Dimensions 5.51”(DIA) x 4.41”(H) / 140(DIA)x112(H)mm Net Weight 2.09 lbs / 950g

* Specifications are subject to change without notice. PAL version also available.

NTSC: 1028(H)x508(V)

PAL: 1024(H)x596(V)

Color:680TVL, B/W:700TVL

Sony Effio WDR

Color: 0.1Lux@ F1.2, B/W:0.08Lux@F1.2,

Sense-up: 0.0001Lux@F1.2

AUTO (1/50(60)~1/100,000sec.) / SCHEDULE or DAY&NIGHT / MANUAL:

1/50(60), FL 1/120(100), 1/200, 1/250, 1/350, 1/500, 1/750, 1/1,000, 1/1,500,

1/2,000, 1/3,000, 1/4,000, 1/10,000, 1/30,000, 1/60,000, 1/100,000 sec.

ATW / AWB / AWC (Push Lock) / MANUAL /

OUTDOOR (1800°K~10500°K) / INDOOR (4500°K~8500°K) / ANTI CR

ENGLISH / TRADITIONAL CHINESE /

SIMPLIFIED CHINESE

ON / OFF (24x16 Zones) ;

ON / OFF (16 Zones Programmable, Polygonal Mosaic)

f2.8mm~10.5mm/F1.2

Aspherical Auto IRIS Lens/99.5°~27.4°

12V DC / 24V AC (10.8~39Vdc/24Vac) ; 3.0W

Internal 12V DC Only

NTSC: 811(H) X 508(V)

PAL: 795(H) X 596(V)

Color: 610TVL, B/W: 630TVL

Sony Effio WDR

2. Camera Overview

2.1 Dimensions

2.2 Description of Camera Parts

① FAR/NEAR

To adjust the lens focus for near and far.

② WIDE/TELE

To adjust the lens angle for wide and tele.

③ OSD Control Buttons

ENTER button

UP & DOWN button

LEFT & RIGHT button

④ VIDEO Connector

This is an output for BNC connection (75Ω).

⑤ Power Input Terminal

Connect the power input of 12V DC or 12V DC / 24V AC.

⑥ Secondary Power Input Terminal

Connect the power input of 12V DC.

⑦ Secondary VIDEO Connector

This is an RCA output.

3. OSD Operation

3.1 OSD Control Buttons

① UP

Use this button to move the cursor upwards to the desired item.

② RIGHT

Use this button to move the cursor to the right to select or to adjust the parameters of the

selected item. The parameter increases when the right button is pressed.

③ DOWN

Use this button to move the cursor downwards to the desired item.

④ LEFT

Use this button to move the cursor to the left to select or to adjust the parameters of the

selected item. The parameter decreases when the left button is pressed.

⑤ ENTER

Use this button to display the main menu, to confirm and to enter the submenus when

they’re available. Items with “

of those items, select the desired item with the button c or d and press the ENTER button

to bring up the sub-menu and edit.

<┘” symbol in the end contain sub-menus. For further settings

3.2 OSD Operation

1. Start to operate the OSD menu Press the ENTER button to bring up the OSD main menu to start operating OSD menus.

2. Select items with the cursor buttons

y Use buttons c and d to move the cursor up and down.

y Use buttons e and f to switch the modes or to adjust the parameters or the values of

the settings.

3. Switch to the sub-menu

Items with the symbol “

<┘” in the end contain sub-menus. For further settings of those items,

select the desired item with the button c or d and press the ENTER button to bring up the sub-menu and edit.

** MAIN MENU **

LENS

AGC WDR WHITE BALANCE 2DNR & 3DNR DAY / NIGHT SHUTTER IMAGE EFFECT SYSTEM EXIT

MANUAL<┘

SET<┘

AUTO WDR<┘

ATW SET<┘

COLOR

SET<┘ SET<┘ SET<┘

** MAIN MENU **

LENS AGC WDR WHITE BALANCE 2DNR & 3DNR DAY / NIGHT SHUTTER IMAGE EFFECT SYSTEM EXIT

Main Menu

4. Return to the previous page Select RETURN and press the ENTER button to return to the previous page.

5. Exit the OSD menu

Select EXIT with the button c or d and press the ENTER button to exit the OSD menu.

SET<┘

AUTO

WDR<┘

ATW SET<┘

COLOR

MANUAL<┘

SET<┘ SET<┘ SET<┘

** LENS **

LENS DC<┘ BRIGHTNESS 14 SPEED 0 RETURN EXIT

Sub-Menu

+ 21 hidden pages

Okina USA WDEDX-768AI-VD, WDEDX-761AI-VD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual