Okina USA SEMT-7680, SEMT-7610 Quick Setup Manual
C /
p
SEMT-7680 680 TVL
SEMT-7610
610 TVL
Day & Night Box Camera
Effio-E with ICR
** Please refer to User Manual CD for detailed information **
DIMENSIONS (Unit: mm)
DESCRIPTION OF CAMERA PARTS
① Lens Mount
This mount is used to install a CS-mount lens. CS-adaptor ring is
required when using a C mount lens.
② Camera Mounting Screw Holes
Screw hold for mounting the camera.
③ Mount Adaptor
The adaptor can be attached onto the top or the bottom of the unit.
④ Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC
control signal.
⑤ Video Connector
Video can be outputted via this BNC connector (75Ω).
Copyright © 2010. All Rights Reserved.
www.okinausa.com 1 REV012011-V05
Quick Setup Guide
FEATURES
SEMT-7680
1/3" Digital Wide Dynamic Color Camera
Sony Exview CCD, Sony Effio-E DSP
Color: 610 TVL, B/W: 630 TVL
Color: 0.03 Lux @ F1.0, B/W: 0.005 Lux @ F1.0
SEMT-7610
1/3" Digital Wide Dynamic Color Camera
Sony Super HAD CCD II, Sony Effio-E DSP
Color: 680 TVL, B/W: 700 TVL
Color: 0.05 Lux @ F1.0, B/W: 0.01 Lux @ F1.0
Mechanical IR Cut Filter (ICR)
Multi-Language OSD Control
ATR Digital Powerful 128x WDR (52dB)
Anti-Headlight (HLC)
2D Noise Reduction
High Contrast Images
Ideal for Backlight Environments
Mosaic Privacy Mask
Advanced Motion Detection Function
Picture Quality Adjustable (Contrast/Sharpness/Hue/Gain)
12V D
PACKAGE CONTENTS
One (1) SEMT-7680 or SEMT-7610 camera
One (1) DC Connector
One (1) CS Mount Ring
One (1) DC Plug
One (1) Allen Wrench
One (1) Warning Sign Sticker
One (1) Quick Setup Guide
One (1) CD with User Manual
* For any returns, please include all components listed above with
original packaging in Resalable Condition
be accepted if any components are missing/damaged or if any cable is
cut or tampered with.
24V AC, 3.5W
. Absolutely No Returns will
⑥ Iris Mode Selection
Select DC or VIDEO mode according to the lens.
⑦ OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
⑧ Secondary Video Connector
Video can be outputted via this BNC connector (75Ω).
⑨ Power Input Indicator Light
When the camera is connected to a power source, the indicator light
will be on.
⑩ Power Input Terminal
Connect the
ower input of 12V DC or 12V DC / 24V AC.
(H)
)
(H)
(
SPECIFICATION
PIC T-413 T-415
Model SEMT-7680 SEMT-7610
Image Sensor 1/3" Sony 960H Exview CCD 1/3” Sony 760H Super HAD CCD II
Number of Total Pixels
Resolution ; DSP Color: 680 TVL, B/W: 700 TVL ; Sony Effio-E Color: 610 TVL, B/W: 630 TVL ; Sony Effio-E
Minimum Illumination Color: 0.03 Lux @ F1.0, B/W: 0.005 Lux @ F1.0 Color: 0.05 Lux @ F1.0, B/W: 0.01 Lux @ F1.0
Wide Dynamic Range
Video Output ; Connector 1.0Vp-p Composite, 75Ω ; BNC x2
Signal to Noise Ratio More than 52dB (AGC off, Weight on)
Gamma Correction 0.45
Mechanical IR Cut Filter (ICR) Automatically Switches (Switching Lux Level can be adjusted)
IR Compatibility Compatible with Infrared Illuminator
Menu OSD Control
Title TITLE (LOCATION)
Synchronizing System INTERNAL
Digital Day&Night Mode COLOR / B&W / AUTO
Electronic Shutter
Automatic Gain Control AUTO (4 steps)
White Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Back Light Compensation HLC / BLC / OFF
Flickerless ON / OFF
Dynamic Noise Reduction 2D
Language
Motion Detection ; Privacy
Automatic IRIS ; Connecotr VIDEO / DC ; D4 IRIS Jack
Lens Mount C / CS mount (with adaptor)
Lens Not Included
Power Input ; Consumption 12V DC / 24V AC (10.8~39V DC / 24V AC) ; 3.5W
Operation ; Storage Temp. 14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C
Operation ; Storage Humidity Maximum: RH80% ; RH90%
Dimensions 2.36”(W) x 1.97”(H) x 4.68”(L) / 60mm(W) x 50mm(H) x 119mm(L)
Net Weight 0.77 lbs / 350g
* Specifications are subject to change without notice.
PAL version also available.
OSD OPERATION
Use OSD Control Buttons to operate OSD and adjust settings.
Copyright © 2010. All Rights Reserved.
www.okinausa.com 2 REV012011-V05
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
NR <┘
WHITE BAL ATW<┘
ATR OFF
BACKLIGHT OFF
DAY/NIGHT AUTO<┘
NEXT<┘
EXIT<┘ SAVE ALL<┘
NTSC: 1028(H) x 508(V)
PAL: 1024
MANUAL: 1/50(60), FL 1/120(100), 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000sec.
ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH /
x 596(V
ATR Digital WD (ATR: Adaptive Tone-curve Reproduction) ;
ON / OFF
128x Normal Camera (52dB)
AUTO (1/50(60)~1/100,000sec.) /
SIMPLIFIED CHINESE
ON / OFF (24x16 Zones, Alarm) ;
8Zones Programmable, Polygonal Mosaic)
NTSC: 811(H) x 508(V)
PAL: 795
x 596(V)
1. Start to operate the OSD menu
Press the ENTER button to bring up the OSD main menu to start
operating OSD menus.
2. Select items with the cursor buttons
y Use buttons c and d to move the cursor up and down.
y Use buttons e and f to switch the modes or to adjust the
parameters or the values of the settings.
3. Switch to the sub-menu
Items with “<┘” symbol in the end contains sub-menus. For further
settings of those items, select the desired item with the button c or d
and press the ENTER button to bring up the sub-menu and edit.
4. Return to the previous page
Select RETURN and press the ENTER button to return to the previous
page.
5. Exit the OSD menu
Select EXIT with the button c or d and press the ENTER button to exit
the OSD menu.
Loading...