Okina USA HD21B24-940 User Manual

HDC-31
Copyright © 2013. All R ights Reserved. R201311-V18

HD21B24-940

HD SDI 1080p WDR DNR 24 I R OSD

Bullet Camera

USER MANUAL

FEATURES

• SDI 1080p - 1920 x 1080

• 1/2.9" Sony Exmor

• 4.0mm Fixed Lens

• 0.5 Lux

• 24 IR LED

• IR distance up to 50ft / 24m

• 700mA max

• 12V DC

Please read the Manual before attempting to use this product.

Specifications and appearance are subject to change without notice.

2

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countri e s wit h sep arate collection syst ems.)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ens urin g thi s pro duc t is dispo se d of co rr ectly, you will help prevent pot en ti al neg ati v e
consequences for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please contact yo ur local city office, your hous e hold was te dis p osal
service or the shop where you pu rch as ed t he pr od uct.

CAUTION

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.

2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.

3. Require s a proper operati n g en vi ronment
This camera is designed for indoor use. The allowable temperature range for operation of this camera is

between 14°F ~ 122°F / -10°C ~ 50 °C.

4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning should be done by using a

chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any
fingerprint or dust.

5. Check the power so ur ce vo lt ag e
The power source voltage should be within the specified range. (Camera must meet the specifications).

Camera must be conne cte d to a surge pro tect or at all tim es.

6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts

that could result in a fire or electric shock. Never spill any kind of liquid on the video product.

7. Servicing
Do not attempt to service this video product by yours elf as opening or removing covers ma y expose you to

dangerous volta ge or oth er ha z ar ds. Refer all service to quali fied se rvici n g per son nel .

8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the

following conditions:

a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.

LIMITED WARRANTY

OKINA USA products are covered under warranty for one (1) years from the date of purchase. The warranty will
automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information regarding when and where the

product was purchased. We have no other way to verify the purchase record without the serial number on the
camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be

voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result

in termination of the warranty.

3

PACKAGE CONTENTS

1. One (1) HD21B24-940 Camera

2. Three (3) Mounting Screws

3. Three (3) Wall Anchors

4. One (1) User Manual

DIMENSIONS (Unit: inches / mm)

PARTS AND FUNCTIONS

INSTALLATION

1.

2. 3.

1. Fix the mount bracket with the

supplied 3pcs of screws on the
ceiling or wall.

2. Adjust the camera direction.

3. Firmly fix the screws in the bracket
after setting the camera direction.

* For any returns, please include all

components list ed ab ove with
original packagi ng in Resalable

Condition. Absolutely No
Returns will be accepted if any

component is missing/damaged.