Okina WDEM-7680LPDN-IO, WDEM-7680LPDN-IOP User Manual
Copyright © 2012. All Rights Reserved.
** Replacing SHM-7540LPDN-IO
WDEM-7680LPDN-IO
WDEM-7680LPDN-IOP
License Plate Capture Wide Dynamic
Camera with I/O
USER MANUAL
Built with Sony's latest Effio DSP and 1/3" 960H Double-speed CCD WD image sensor,
WDEM-7680LPDN-IO has the capability of achieving resolutions of over 680 TVL, the
WDR function can produce clear and true image without noise even in tunnels, an
environment with very strong light, and can capture vehicle license plate numbers at
speed up to 120mi/hr / 200km/hr during the day, and 35mi/hr / 60km/hr at night.
The most exciting feature is the Multi-Shutter modes, Scheduled Shutter Mode, Manual
Shutter Mode and Auto Shutter Mode. WDEM-7680LPDN-IO supports Balun RS-485
remote control to control the OSD remotely. When it comes to Car License Plate Camera,
WDEM-7680LPDN-IO is definitely ideal to install at any kind of car entrances and exits
for capturing car license plates.
2
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems).
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you
purchased the product.
CAUTION
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to strong light as this may damage the
pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the
camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for
operation of this camera is between 14°F ~ 122°F / -10C ~ 50C.
Please read the Manual before attempting to use this product.
Specifications and appearance are subject to change without notice.
3
4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning should be
done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator
and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet
the specifications). Camera must be connected to a surge protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage
points of short out parts that could result in a fire or electric shock. Never spill any kind
of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all service to
qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing
personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.
LIMITED WARRANTY
OKINA USA products are covered under warranty for one (1) year from the date of
purchase. The warranty will automatically be voided if any of the following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any information
regarding when and where the product was purchased. We have no other way to
verify the purchase record without the serial number on the camera sticker; therefore,
it should not be removed.
2. Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not described in this
manual, the warranty will be voided immediately. It is the customer’s responsibility to
keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or
modifying of the cables will result in termination of the warranty.
4
TABLE OF CONTENTS
1. Introduction ……………………………………………….….……….… 5-6
1.1 Features ………………………………………………………..…….... 5
1.2 Package Contents ……………………………………….…………… 5
1.3 Specifications …………………………………………………………… 6
2. Camera Overview …………………………………………………….… 7-9
2.1 Dimensions …………………………………………..…………….….. 7
2.2 Parts and Functions ………………………………..………………. 7-9
3. OSD Operation ……………………………………………….……….. 10-12
3.1 OSD Control Buttons ……………………………………..………..…. 10
3.2 OSD Operation ………………………………………………..…… 11-12
4. Configuration ………………………………………………….……... 12-31
4.1 Lens …………………………………………………………………….. 12
4.2 Exposure ……………………………………………………….….. 13-14
4.3 WDR / BLC / FOG RE ………………………………..….……….. 14-16
4.4 White Balance …………………………………………………...… 17-18
4.5 2DNR & 3DNR (Dynamic Noise Reduction) ……………………….. 19
4.6 Day/Night ………………………………………………………….. 20-23
4.7 Image ………………………………………..………………..…… 24-25
4.8 Effect ……………………………………….………………………. 25-29
4.9 System ………………………………………………………...…… 29-31
4.10 Balun Function (UTP) ………………………………………………. 32
4.11 Exit …………………………………………………………………….. 32
5. Related Products ………………………….……………………….... 33-34
5.1 Recommended Lens …………………………..…………………….. 33
5.2 Recommended Housing & Bracket …………………………………. 34
5
1. INTRODUCTION
1.1 Features
1/3” Sony 960H Ex-View HAD CCD II
Sony Effio WDR II DSP
Color: 680 TVL / B&W: 700 TVL
Color: 0.03 Lux @ F1.2 / B&W: 0.01 Lux @ F1.2
ICR: 0.005 Lux @ F1.2 / Sens-up: 0.0001 Lux @ F1.2
I/O Input/Output
Mechanical IR Cut Filter (ICR)
Capture car license plate numbers at night with speed up to 60km/hr
512x Wide Dynamic Range
Shutter Modes (Auto, 196 Step Manual)
Multi-Language OSD Control
Fog Reduction ; High Light Compensation (HLC)
2D/3D Noise Reduction
Digital Image Stabilizer (DIS) ; E-zoom Function (1~256x)
Advanced Motion Detection Function
Quadrangle Mosaic Privacy Mask
Dual Power 12V DC / 24V AC
1.2 Package Contents
One (1) SHM-7540LPDN-IO Camera
One (1) Allen Wrench
One (1) CS Ring
One (1) DC Cord
One (1) OSD User Manual
One (1) User’s manual
* For any returns, please include all components listed above with original packaging in
Resalable Condition. Absolutely No Returns will be accepted if any component is
missing/damaged.
6
1.3 Specifications
Model
WDEM-7680LPDN-IO
WDEM-7680LPDN-IOP
TV System
NTSC
PAL
Image Sensor
1/3" Sony 960H Ex-View HAD CCD II
Number of Total Pixels
1020(H) x 508(V)
1020(H) x 596(V)
Resolution
Color:680TVL, B&W:700TVL ; Sony Effio WDR II
Minimum Illumination
Color: 0.03 Lux @ F1.2, B/W: 0.005 Lux @ F1.2,
Sense-up: 0.0001 Lux @ F1.2
Wide Dynamic Range
512x Normal Camera (54dB)
Video Output
1.0Vp-p Composite, 75Ω (BNC x2)
Signal to Noise Ratio (S/N)
More than 55dB (AGC off)
Gamma Correction
0.45
Mechanical IR Cut Filter (ICR)
Automatically Switches (Switching Lux Level can be adjusted)
IR LED ; Working Distance
Compatible with Infrared Illuminator
Menu
OSD Control or by RS485 Control
Title
TITLE (LOCATION)
Synchronizing System
INTERNAL / LINE LOCK (AC version Only)
Digital Day & Night Mode
COLOR / B&W / AUTO / EXT
Electronic Shutter
Auto Shutter: Self Defined Auto Shutter Speed Range
Programmable
Manual Shutter: 196 Steps, 1/50, 1/60, 1/70, 1/80, 1/90, 1/100,
1/110, 1/120,...1/1990, 1/2000 sec.
(1 Step per 1/10sec.)
Capture Speed
Day: Up to 120 mi/hr / 200 km/hr ; Night: Up to 35 mi/hr / 60 km/hr
Automatic Gain Control
0~200 Levels (Adjustable Level Settings)
White Balance
ATW / AWB / PUSH LOCK / MANUAL / 3200K / 6300K / ANTI CR
WDR ; BLC ; Fog Reduction
WDR / FOG REDUCTION / BLC / OFF
High Light Compensation
ON / OFF / AUTO
Flickerless
ON / OFF
Dynamic Noise Reduction
3D / 2D
Sense Up
AUTO (Limit x2~x512) / OFF
Digital Image Stabilizer
ON / OFF
Language
ENGLISH/TRADITIONAL CHINESE/SIMPLIFIED CHINESE
E-Zoom
x1~x256, Pan / Tilt Adjustable
Motion Detection ; Privacy
ON / OFF (24x16 Zones, Alarm) ;
ON / OFF (15 Zones Programmable, Quadrangle Mosaic)
Camera Control Interface
RS485 Interface OSD Control by Pelco-D, Pelco P
Automatic IRIS ; Connector
VIDEO / DC ; D4 IRIS Jack
Lens Mount
CS / C mount (With Adaptor Ring)
Power Supply ; Consumption
12V DC / 24V AC (10.8~39V DC / 24V AC) ; 2W
Operation ; Storage Temp.
14°F~122°F / -10°C~50°C ; -4°F~140°F / -20°C~60°C
Operation ; Storage Humidity
Maximum: RH80% ; RH90%
Dimensions L x W x H
4.72 x 2.44 x 2.2 inches / 120 x 62 x 56 mm
Net Weight
0.77 lbs / 350g
* Specifications are subject to change without notice.
7
2. CAMERA OVERVIEW
2.1 Dimensions
2.2 Parts and Functions
8
① Lens Mount
This mount is used to install a CS-mount lens. CS-adaptor ring is required when
using a C mount lens.
② Camera Mounting Screw Holes
Screw holes for mounting the camera.
③ Mount Adaptor
The adaptor can be attached onto the top or the bottom of the unit.
④ Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto-iris lens (not supplied) with DC control
signal.
⑤ OSD Control Buttons
ENTER button
UP & DOWN buttons
LEFT & RIGHT buttons
PIN NO.
VIDEO
DC
1
DC + 12V
CONTROL -
2
NC
CONTROL +
3
IRIS
DRIVE +
4
GND
DRIVE -
9
⑥ Video Connector
Video can be outputted via this connector. (75Ω).
⑦ IRIS Mode Selection Switch
Select DC or VIDEO mode according to the lens.
⑧ Video Connector
Video can be outputted via this connector. (75Ω).
⑨ Communication Connectors
1. RS485+
2. RS485-
3. Day & Night External Input (controlled by external infrared illuminator)
4. Day & Night Output
5. NC
6. Ground
⑩ Power Input Indicator Light
When the camera is connected to a power supply, the indicator light will be on.
⑪ RS-485 Terminal Impedance Switch
Set the first and the last equipment terminal impedances as 120Ω and set the rest
parallel connection equipment in the middle as HiZ to obtain the best transmitting
status.
⑫ Power Input Terminal
Connect to the power supply.
10
3. OSD OPERATION
3.1 OSD Control Buttons
① UP
Use this button to move the cursor upwards to the desired item.
② RIGHT
Use this button to move the cursor to the right to select or to adjust the
parameters of the selected item. The parameter increases when the right
button is pressed.
③ DOWN
Use this button to move the cursor downwards to the desired item.
④ LEFT
Use this button to move the cursor to the left to select or to adjust the
parameters of the selected item. The parameter decreases when the left
button is pressed.
⑤ ENTER
Use this button to display the main menu, to confirm and to enter the
submenus when they’re available. Items with “<┘” symbol in the end
contain sub-menus. For further settings of those items, select the desired
item with the button or and press the ENTER button to bring up the
sub-menu and edit.
11
3.2 OSD Operation
I. Start to operate the OSD menu
Press the ENTER button to bring up the OSD main menu to start operating
OSD menus.
II. Select items with the cursor buttons
Use buttons and to move the cursor up and down.
Use buttons and to switch the modes or to adjust the parameters or
the values of the settings.
III. Switch to the sub-menu
Items with “<┘” symbol in the end contain sub-menus. For further settings of
those items, select the desired item with the button or and press the
ENTER button to bring up the sub-menu and edit.
** MAIN MENU **
LENS
AUTO
<
┘
EXPOSURE
SET
<
┘
WDR/BLC/FOG
OFF
WHITE BALANCE
ATW
<
┘
2DNR & 3DNR
SET
<
┘
DAY/NIGHT
AUTO
<
┘
IMAGE
SET
<
┘
EFFECT
SET
<
┘
SYSTEM
SET
<
┘
EXIT
<
┘
** MAIN MENU **
LENS
AUTO
<
┘
EXPOSURE
SET
<
┘
WDR/BLC/FOG
OFF
WHITE BALANCE
ATW
<
┘
2DNR & 3DNR
SET
<
┘
DAY/NIGHT
AUTO
<
┘
IMAGE
SET
<
┘
EFFECT
SET
<
┘
SYSTEM
SET
<
┘
** AUTO IRIS **
TYPE
DC
SPEED
|||||||||||||||| 050
RETURN<┘
Main Menu
Sub Menu
Loading...