Okina WDEDX-768AI 680 TVL, WDEDX-761AI 610 TVL User Manual

WDEDX-768AI 680 TVL WDEDX-761AI

610 TVL

Hyper Wide Dynamic Dome Camera - Effio WDR

User Manual

Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference.

Safety Warnings

1. Read this manual carefully before installing the unit

Please read this manual first for correct installation and operation.

2. Never install the camera on a ceiling that cannot hold its weight

The product may fall down and cause damages.

3. Never install the camera near electric or magnetic fields

Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers since the magnetic fields generate from above devices would distort the video image.

4. Never install or use the camera in areas exposed to water, oil or gas

The water, oil or gas may result in operation failure, electric shock or fire. Do not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location.

5. Never face the camera toward the sun

Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.

6. Power Cord Protection

Touching the wet power cord with hands or touching the power cord with wet hands may

result in electric shock. Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them, playing particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

7. Attachments

Do not use attachment not recommended by the product manufacturer as they may cause hazards.

8. Object and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the product.

9. Do not operate the camera in environments where the temperature,

humidity or power source is beyond the specified ones

Use the camera in suitable environments where the temperature is within

-10°C~50°C and humidity below 90%. Use the input power source as the specifications listed.

10. Cleaning

Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

11. Never disassemble the camera nor put impurities in it

Disassembly or impurities may result in trouble or fire.

12. Stop using when the product emits smoke or abnormal heat

13. Servicing

Do not attempt to repair this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

14. Retain Instructions

THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED FOR FUTURE REFERENCE.

Warranty

OKINA USA products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information regarding when and where the product was purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut

The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result in termination of the warranty.

NOTICE:

The information in this manual was up-to-date when published. The manufacturer reserves the

right to revise and improve its products. All specifications are therefore subject to change without

notice.

Table of Contents

1. INTRODUCTION ....................................................................................... ......................................... 1

1.1 MAIN FEATURES .............................................................................................................................. 1

1.2 CONTENT LIST ................................................................................................................................. 1

1.3 SPECIFICATIONS ................................................. ............................................................................. 2

2. CAMERA OVERVIEW ........................................................................................................................ 3

2.1 DIMENSIONS ................................................................................................................................... 3

2.2 DESCRIPTION OF CAMERA PARTS ......................... ...................... ....................... ....................... ......... 4

3. OSD OPERATION ................. ............................................................................................................. 5

3.1 OSD CONTROL BUTTONS ................................................................................................................ 5

3.2 OSD OPERATION ............................................................................................................................ 6

4. CONFIGURATION .............................................................. ................................................................ 7

4.1 LENS ............................................. ................................ ................................ ................................ 7

4.2 AGC .............................................................................................................................................. 8

4.3 WDR ............................................................................................................................................. 9

4.4 WHITE BALANCE CONTROL ............................................................. ........................................... 11

4.5 2D &3D NR (DYNAMIC NOISE REDUCTION) ..................................................................... ................ 13

4.6 DAY/NIGHT ..................................................... ............................................................................ 15

4.7 SHUTTER ................................................................................................................................. .. 18

4.8 IMAGE ........................................................................................................................................ 20

4.9 EFFECT ...................................................................................................................................... 21

4.10 SYSTEM ................................................................................................................................... 24

4.11 EXIT .......................................................................................................................................... 26

1. Introduction

WDEDX-768AI and WDEDX-761AI are built with Sony’s latest image processor, this

super-wide dynamic camera has the capability of achieving resolutions of over 680 TVL or 610 TVL respectively. The features include 2-D and 3-D noise reduction, sense up, spot removal, strong-light suppression, intelligent motion, face detection and OSD functions. The camera also comes with 256x digital zoom, an intelligent auto exposure compensation system. WDEDX-768AI and WDEDX-761AI reproduces nearly perfect images like no other.

1.1 Main Features

WDEDX-768AI

 Color: 680 TVL, B/W: 700 TVL  Powerful 510x WDR (54dB)

WDEDX-761AI

 Color: 610 TVL, B/W: 630 TVL  Powerful 256x WDR (53dB)

 1/3" Hyper Wide Dynamic Color Camera, Effio WDR DSP  Color: 0.1 Lux @ F1.2, B/W: 0.08 Lux @ F1.2, Sense-up: 0.0001 Lux @ F1.2  Multi-Language OSD Control  Ideal for Backlight Environments  2D/3D Noise Reduction & Sense Up (512x) Functions  Shutter Mode (SCHEDULE / DAY&NIGHT)  Face Detection of up to 4 faces  E-zoom Function (1~256x)  Advanced Motion Detection Function  Polygonal Mosaic Privacy Mask / Freeze / Timer Clock  Built-in Varifocal Lens & Unique 3-Axis Gimble Mechanism  12V DC / 24V AC, 3.0W

1.2 Content List

 One (1) WDEDX-768AI or WDEDX-761AI camera with video/power cable  Two (2) Mounting Screws  One (1) DC Male Connector  One (1) Cleaning Cloth  One (1) Warning Sign Sticker  One (1) User Manual  One (1) CD

* For any returns, please include all components listed above with original packaging in Resalable Condition

missing/damaged or if any cable is cut or tampered with.

. Absolutely No Returns will be accepted if any component is

1.3 Specifications

PIC Model Image Sensor

Number of Total Pixels

Resolution

Minimum Illumination Wide Dynamic Range Video Output Signal to Noise Ratio Gamma Correction Menu Title Synchronizing System Digital Day&Night Mode

Electronic Shutter

Automatic Gain Cont r ol

White Balance

Back Light Compensation Flickerless Dynamic Noise Reduction Sense Up Face Detection

Language

E-Zoom

Motion Detection ; Privacy

Timer Clock Lens Mount

Lens, Angle of View(H)

Power Input ; Consumption

Operation ; Storage Temp. Operation ; Storage Humidity Dimensions Net Weight

* Specifications are subject to change without notice.

PAL version also available.

NTSC: 1028(H)x508(V)

Color: 680TVL, B/W: 700TVL

Color: 0.1 Lux @ F1.2, B/W: 0.08 Lux @ F1.2, Sense-up: 0.0001 Lux @ F1.2

510x Normal Camera (54dB) 256x Normal Camera (53dB)

1.0Vp-p Composite, 75Ω (BNC) / Internal RCA for Service Monitor

AUTO (1/50(60)~1/100,000sec.) / SCHEDULE or DAY&NIGHT / MANUAL:

1/50(60), FL 1/120(100), 1/200, 1/250, 1/350, 1/500, 1/750, 1/1,000, 1/1,500,

1/2,000, 1/3,000, 1/4,000, 1/10,000, 1/30,000, 1/60,000, 1/100,000 sec.

D-225 D-226

WDEDX-768AI WDEDX-761AI

1/3" Sony Double-speed (Double-density) CCD

NTSC: 811(H) X 508(V)

PAL: 1024(H)x596(V)

Sony Effio WDR

More than 52dB (AGC off, Weight on)

0.45

OSD Control

TITLE (LOCATION)

INTERNAL

COLOR / B&W / AUTO / SCHEDULE

AUTO / MANUAL / OFF

ATW / AWB / AWC (Push Lock) / MANUAL /

OUTDOOR (1800°K~10500°K) / INDOOR (4500°K~8500°K)

WDR / BLC / OFF

ON / OFF

3D / 2D

AUTO (Limit x2~x512) / OFF

4 Face Detection

ENGLISH / TRADITIONAL CHINESE /

SIMPLIFIED CHINESE

x1~x256, Pan / Tilt Adjustable

ON / OFF (24x16 Zones, Alarm) ;

ON / OFF (16 Zones Programmable, Polygonal Mosaic)

Year / Month / Date, Hour / Minute / Second

Built-in DC Auto IRIS Lens

f2.8mm~10.5mm/F1.2

Aspherical Auto IRIS Lens/99.5°~27.4°

12V DC / 24V AC (10.8~39V DC / 24V AC) ; 3.0W

Internal 12V DC Only

14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C

Maximum: RH80% ; RH90%

5.51”(DIA) x 4.37”(H) / 140(DIA)x111(H)mm

1.10 lbs / 500g

PAL: 795(H) X 596(V)

Color: 610TVL, B/W: 630TVL

Sony Effio WDR

2. Camera Overview

2.1 Dimensions

2.2 Description of Camera Parts

①. FAR/NEAR

To adjust the lens focus for near and far.

②. WIDE/TELE

To adjust the lens angle for wide and tele.

③. OSD Control Buttons

ENTER button

UP & DOWN button

LEFT & RIGHT button

④. VIDEO Connector

This is an output for BNC connection to a video monitor, etc (75Ω).

⑤. Power Input Terminal

Connect the power input of 12V DC or 12V DC / 24V AC.

⑥. Secondary Power Input Terminal

Connect the power input of 12V DC.

⑦. Secondary VIDEO Connector

This is an RCA output.

3. OSD Operation

3.1 OSD Control Buttons

. UP

Use this button to move the cursor upwards to the desired item.

. RIGHT

Use this button to move the cursor to the right to select or to adjust the parameters of

the selected item. The parameter increases when the right button is pressed.

. DOWN

Use this button to move the cursor downwards to the desired item.

. LEFT

Use this button to move the cursor to the left to select or to adjust the parameters of the

selected item. The parameter decreases when the left button is pressed.

. ENTER

Use this button to display the main menu, to confirm and to enter the submenus when they’re available. Items with “<┘” symbol in the end contain sub-menus. For further

settings of those items, select the desired item with the button c or d and press the

ENTER button to bring up the sub-menu and edit.

+ 21 hidden pages

Okina WDEDX-768AI 680 TVL, WDEDX-761AI 610 TVL User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual