Okina TV8IB6-8VF650LP User Manual

TVI-23
Copyright © 2015. All Rights Reserved. R201503-V02

TV8IB6-8VF650LP

HD TVI 1080P ICR OSD

License Plate Bullet Camera

USER MANUAL

FEATURES

• HD TVI - 1920 x 1080 @ 30fps

• 1/2.8" Sony CMOS, 1.3 Megapixel

• 6.0~50mm Auto Iris Lens

• 6 High Power IR LED; IR distance 250ft / 80m

• 0.02 Lux (F1.2 , AGC ON) / 0 Lux IR on

• Dual Power 12V DC / 24V AC

12V DC: 8.64W / 720mA
24V AC: 7W / 490mA

• IP67 Rating

Please read Manual before attempting to use this product.

Specifications and appearance are subject to change without notice.

2

Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countri e s wit h sep arate collection syst em s.)

This symbol on the product or on its packaging indicates that this product shall not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this pro duc t is disposed of correctl y, you will help prevent potenti al neg ati v e
consequences for the environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources. For more detailed
information about recycling of this product, please con tact yo ur local city office, your hou se hol d was te disposal
service or the shop whe re you pu rch ased the product.

CAUTION

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may damage the pick-up device.

2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the camera.

3. Require s a proper opera tin g environm en t
This camera is designed for indoor or outdoor use. The allowable temperature range for operation of this

camera is between 14°F ~ 122°F / -10°C ~ 50°C.

4. Clean the front face or lens
It is recommended that the surface be cleaned ever y 3~6 mo nth s . Cleaning should be done b y using a

chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator and ethanol to carefully remove any
fingerprint or dust.

5. Check the power so ur ce vo lt ag e
The power source voltage should be within the specified range. (Camera must meet the specifications).

Camera must be conne cte d to a surge pro tect or at all tim es.

6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage points of short out parts

that could result in a fire or electric shock. Never spill any kind of liquid on the video product.

7. Servicing
Do not attempt to service this video product by yourself as opening or removing covers may expose you to

dangerous volta ge or oth er ha zar ds . R ef e r all ser vic e to qualified servicin g per son nel.

8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing personnel under the

following conditions:

a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.

LIMITED WARRANTY

OKINA USA products are covered under warranty for one (1) year from the date of purchase. The warranty will
automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information regarding when and where the

product was purchased. We have no other way to verify the purchase record without the serial number on the
camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this manual, the warranty will be

voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or modifying of the cables will result

in termination of the warranty.

3

PACKAGE CONTENTS

1. One (1) HD TVI IR License Plate Bullet Camera

2. Four (4) Wall Mounting Screws

3. Four (4) Wall Anchors

4. One (1) Rubber Washer

5. One (1) Sticker Mount ing Template

6. One (1) User Manual

* For any returns, please include all components listed above with original packaging in Resalable Condition.

Absolutely No Returns will be accepted if any component is missing/damaged.

DIMENSIONS (Unit: mm)

1.

4

FUNCTIONS

The camera includes auto w hite bal a n ce m ode (AWB ) auto capt ur e an d color temperature.
The range is 2400°K~9600°K.
SENSOR：Auto Cell Device S ensor, the IR LED would on when night comes to m ak e up l ightnes s. IR LED

would not on in the day, to reduce power consum ption .

VIDEO, POWER AND DATA OUTPUT J ACK

F(BNC) JACK is for video outp ut . DC JACK is for the power in, it is necessary to use a consta nt voltage

adapter. Data (RS485) to connect to c ontroller
for OSD setting.

1. Please use suitable adapter DC12V ± 10 %,

1.5A. Otherwise, thi s pr od uct wil l be dam aged

2. Please use AC24V ± 10%. Otherwise, this
product will be damaged

LENS AND OSD ADJUSTMENT DIP FUNCTIONS

Unscrew the back of the d evi ce, the DIP switches can be seen unde r the c o v er. The DIP switches are
adjustable and waterp roof. The detail s of the functions are shown bel o w.