Okina SSD4-742AI-B, SSD4-742AI-W, SHD4-755AI-W, SHD4-755AI-B Operational Manual
SHD4-755AI-B(W)
Operational Manual
AVAI Dome Series Color Camera
Please read the Operational Manual
FEATURES
1/3” Sony Super HAD CCD
550 TV Lines
420 TV Lines
2.9mm~10.0mm Aspherical Auto Iris IR Lens
(Made in Japan)
12V DC
CAUTIONS
1. Never point the camera toward the sun
Do not expose the lens directly to the sun or to s trong light as this may
damage the pick-up device.
2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could
damage the camera.
3. Requires a proper operating environment
This camera is designed for indoor use. The allo wable temperatur e range
for operation of this camera is between -10C ~ 50C and the allowable
humidity is 85%RH maximum.
4. Clean the front face to the pick-up device
It is recommended that the pick -up device s urface be cleaned bef ore lens
installation or whenever the lens is changed. Cleaning should be done by
using a chamois, a very fine soft cloth, len s tis sue, or cotton tipped
applicator and ethanol to carefully remove any fingerprint or dust.
5. Check the power source voltage
The power source voltage should be within the specified range. (Camera
must meet the specifications). Camera must be connected to a surge
protector at all times.
6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch
dangerous voltage points of short out parts that could result in a fire or
electric shock. Never spill any kind of liquid on the video product.
7. Servicing
Do not attempt to service this video product by yourself as open ing or
removing covers may expose you to dangerous voltage or other hazards.
Refer all service to qualified servicing personnel.
8. Damage requiring service
Unplug this video product from the wall outlet and refer service to
qualified servicing personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video
product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been
damaged.
e. When the video product exhibits a distinct change in
performance.
before attempting to use this product.
SHD4-755AI
SSD4-742AI
SSD4-742AI-B(W)
Optional: MB-6D
Wall Mount Bracket
WARRANTY
OKINA USA Products are covered under warranty for one year from the
date of purchase. The warranty will automatically be voided if any of the
following occurs:
1. Camera sticker is removed
If the camera sticker is removed, we will not be able to confirm any
information regarding when and where the product was purchased. We
have no other way to verify the purchase record without the serial
number on the camera sticker; therefore, it should not be removed.
2.
Camera is modified in any way
If the camera is scratched, damaged, or modified in a manner not
described in this manual, the warranty will be voided immediately. It is
the customer’s responsibility to keep the camera in good condition.
3. Video or power cable is cut
The video cable and the power cable should not be tampered with.
Cutting or modifying of the cables will result in termination of the
warranty.
SPECIFICATIONS
Model SHD4-755AI SSD4-742AI
Image Sensor 1/3” Sony Super HAD CCD
DSP Sony HQ1 Sony
Number of Total
Pixels
Video Output 1.0Vp-p Composite/75 Ohm
Resolution 550 TV Lines 420 TV Lines
Minimum
Illumination
Signal to Noise Ratio
Synchronizing System Internal
Electronic Shutter
Speed Mode
Back Light
Compensation
Auto Gain Control
Flickerless
DC Level
White Balance AWB 2500°K ~ 9200°K
Lead Free YES N/A
Lens 2.9mm~10.0mm Aspherical Auto Iris IR Lens
Power Supply 12V DC / 170mA 12V DC/150mA
Power Consumption 2.0W 1.8W
Operation
Temperature
Storage Temperature -20°C ~ +60°C
Storage Humidity Maximum 85%RH
Weight 300g
Dimensions 118mm(D) × 88mm(H)
NTSC: 811(H) x 508(V)
PAL: 795(H) x 596(V)
0.25 Lux @ F1.2 0.15 Lux @ F1.2
More than 50dB
(AGC OFF)
ON/OFF Switchable
ON/OFF Switchable
ON/OFF Switchable
ON/OFF Switchable
The VR for adjusting the IRIS level of
NTSC: 537(H) x 505(V)
PAL: 537(H) x 597(V)
More than 48dB
(AGC OFF)
Auto Iris Lens
-10°C ~+50°C
DIMENSIONS (Unit: mm)
SHD4-755AI_SSD4-742AI Rev11/2007
NOMENCLATURES AND FUNCTIONS
CAMERA MOUNTING
1. FAR / NEAR
2. WIDE / TELE
3. DC LEVEL
The VR for adjusting the IRIS level of Auto Iris Lens
4. SWITCHES
(1). AES/OFF
AES: Automa tic Electronic Shutter. The range of shutter speed
OFF: AES OFF. The shutter speed is 1/60sec.
be off.
(2). BLC/OFF
BLC: Backlight Compensation. When the object is dark by strong
OFF : BLC OFF.
(3). AGC/OFF
AGC: Automatic Gain Control. The level of gain
Varies from 0 to 26dB.
OFF : AGC OFF. The level of gain is fixed at 0dB.
(4). FL/NOM
FL: Flickerless. In FL mode, the shutter speed is 1/100sec. (NTSC
If choose FL mode, [AES] switch should be off.
NOM: Normal position.
① ② ③ ④
from 1/60sec. (1/50sec.) to 1/100,000 sec.. This mode is
employed for using a manual iris lens.
(1/50sec.).
When an auto iris lens is applied, AES should
light (sunlight etc….) as (Fig.2-1), please turn on BLC.
system) / 1/120sec. (PAL ).
Drill 20mm(3/4") hole on the ceiling as installation template. (see Fig.1).
Fix the mounting plate onto the ceiling as installation template shown holes
position. (see Fig.2).
Fix the dome camera body onto the mounting plate. (see Fig.3).
The on bottom of dome camera body should be put in
the same way on mounting plate then turn right to make sure it is fixed
properly.
Adjust PAN/TILT position and FAR/NEAR &
WIDE/TELE bar to get the mounting picture. (see Fig.4).
Put the cover on to fini sh the installation. (see Fig.5).
PACKAGE CONTENTS
One (1) SHD4-755AI-B, SHD4-755AI-W, SSD4-742AI-B or
SSD4-742AI-W Camera with video/power cable
One (1) Ceiling Top Plate
Five (5) Screws
One (1) Operational Manual
SHD4-755AI_SSD4-742AI Rev07/2007
Loading...