Okina SHM-7550DNP, SHM-7550DN Operational Manual

(

)

(

)

SHM-7550DN

-

NOMENCLATURE AND FUNCTION

Operational Manual

True Day & Night MICF Camera

Please read the Operational Manual
before attempting to use this product.

FEATURES

 1/3” Sony Super HAD CCD
 550 TV Lines, HQ-1 DSP
 0.15 Lux @ F1.0
 Mechanical IR Cut Filter (ICR): As the amount of illumination

decreases, the Mechanical IR Cut Filter autom a tically switches to
B/W mode to increase light sensitivity for a brighter image. After
illumination regains brightness, the Mechanical IR Cut Filter will
automatically switch from B/W mode to color m ode.

 Lead (Pb) Free RoHS Compliance
 Relatively no interference from magnetic or electros tat ic fields.
 Dual Power 12V DC / 24V AC

Day Time Mode

>7 Lux

Night/IR Mode

<4 Lux

1. Lens mount
This mount is used to install a CS-mount lens.
CS-adaptor ring is required if use a C mount lens.

2. Camera mounting screw holes
Screw hole for fixing camera.

3. Mount Adaptor
This adaptor can be attached to either the top or bot tom of the unit.

4. Auto Iris Lens Connector (4-pin type)
The lens connector supplies the auto iris lens (no t sup plied) with DC
power and a video signal or DC control signal.

PIN NO. VIDEO DC

1 DC + 12V CONTROL ­2 NC CONTROL +

5. Control Switch

6. VIDEO connector

This is an output for connection to a video monitor, etc (75ohms).

7. Iris mode selection switch

Used to choose DC or VIDEO mode according to the type of your lens.

8. DC Level adjustment V.R.
Used to adjust video output level of DC driven auto iris lens.

9. Power input terminal

Connect the power supply of 12V DC / 24V AC.

3 VIDEO SIGNAL DRIVE +
4 GND DRIVE -

SW1. SYNC MODE: SYNC Mode Selection INT/L.L. switch.
SW2. AES: Automatic Electronic Shutter OFF/AES switch.
SW3. BLC: Back Light Compensation OFF/BLC switch.
SW4. F.L: Flickerless NOM/F.L switch.
SW5. AGC: Automatic Gain Control OFF/AGC switch.

SHM-7550DN_rev04292008

V

A

A

CONTROL SWITCH OPERATION

SW1. SYNC MODE: INT MODE: The camera may be operated

independently with its internal cry stal control. L.L. MODE: This version
w/o L.L. function.

SW2. A.E.S. (Auto Electronic Shutter): AES: The automatic electronic

shutter control 1/60(1/50) ~ 1/100.000 sec. is employed for using a
manual Iris Lens.

SW3. Example of B.L.C. (Back Light Compensation): When the

object is dark by strong light (sun illumination etc) as (Fig 3-1). Please
turn on BLC switch. The object becomes as (Fig 3-2).

SW4. F.L. (Flickerless): F.L: Fixes shutter speed at NTSC: 1/100 Sec.;

PAL: 1/120 Sec. When using this switch, set “AES” OFF. NOM: Normal
position.

SW5. A.G.C. (Auto Gain Control): AGC: level varies from 0 to 26dB.

OFF: AGC level is fixed at 0 dB.

SPECIFICATION

Model SHM-7550DN SHM-7550DNP
TV System NTSC PAL
Image Sensor 1/3” Sony Super HAD CCD
DSP Sony HQ-1
Total Pixels 811(H) x 508(V) 795(H) x 596(V)
Synchronization Internal

ideo Output 1.0Vp-p Composite / 75ohms

Resolution 550 TV Lines

Minimum Illumination

Day/Night Switching
Electronic Shutter

Speed
Signal to Noise Ratio More than 50dB (AGC OFF)

uto Electronic

Shutter
Back Light

Compensation
Flickerless ON/OFF Switchable

uto Gain Control ON/OFF Switchable

Lens Not Included
Lens Mount C/CS (With Adaptor)
Lead Free Yes

Power Supply 12V DC / 24V AC
Power Consumption 3.0W / 250mA
Operation

Temperature
Storage Humidity RH85% or less

Storage Temperature -20°C ~ +60°C
Dimension 60mm(W) × 50mm(H) × 119mm(L)

Weight 400g

*Specifications are subject to change without no tice

Color mode automatically switches to

1/60~1/100,000sec 1/50~1/100,000sec

0.15 Lux @ F1.0

B/W mode under 2.0 Lux

Mechanical IR Cut Filter (ICR)

Auto/Manual; Color/Monochrome

ON/OFF Switchable
ON/OFF Switchable

-10°C ~ +50°C

PACKAGE CONTENTS

 One (1) SHM-7550DN/SHM-7550DNP Camera
 One (1) Allen Wrench
 One (1) CS Adaptor Ring
 One (1) Auto Iris Lens Connector
 One (1) Operational Manual

* For any returns, please include all components listed above with original
packaging in Resalable Condition. Absolutely No Returns will be
accepted if any component is missing/damaged or if any cable is cut or
tampered with.

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may

2. Handle this camera with care

Avoid any shock or bumping of the camera. Improper handling could

3. Requires a proper operating environment

This c amera is designed for indoo r use. The allowable temper ature range

4. Clean the front face to the pick-up device

It is recommended that the pick-up device surface be cleaned before lens

5. Check the power source voltage

The power source voltage should be within the specified range. (Camera

6. Objects and liquid entry

Never push objects of any kind into this camera as this may touch

7. Servicing

Do not attempt to service this video product by yourself as opening or

8. Damage requiring service

Unplug this video product from the wall outlet and refer service to

OKINA USA Products are covered under warranty for one year from the
date of purchase. The warranty will automatically be voided if any of the
following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any

2.

If the camera is scratched, damaged, or modified in a manner not

3. Video or power cable is cut

CAUTION

damage the pick-up device.

damage the camera.

for operation of this camera is between -10C ~ 50C and the allowable
humidity is 85%RH maximum.

installation or whenever the lens is changed. Cleaning should be done by
using a chamois, a very fine soft cloth, len s t issue, or cotton tipped
applicator and ethanol to carefully remove any fingerprint or dust.

must meet the specifications). Camera must be connected to a surge
protector at all times.

dangerous voltage points of short out parts that could result in a fire or
electric shock. Never spill any kind of liquid on the video product.

removing covers may expose you to dangerous voltage or other hazards.
Refer all service to qualified servicing personnel.

qualified servicing personnel under the following conditions:

a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video

product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been

damaged.
e. When the video product exhibits a distinct change in

performance.

WARRANTY

information regarding when and where the product was purchased. We
have no other way to verify the purchase record without the serial
number on the camera sticker; therefore, it should not be removed.

Camera is modified in any way

described in this manual, the warranty will be voided immediately. It is
the customer’s responsibility to keep the camera in good condition.

The video cable and the power cable should not be tampered with.
Cutting or modifying of the cables will result in termination of the
warranty.

SHM-7550DN_rev04292008