Okina SEDX-761AI-B, SEDX-761AI-BD, SEDX-761AI-WD, SEDX-761AI-W User Manual

SEDX-761AI-B SEDX-761AI-W SEDX-761AI-BD SEDX-761AI-WD

12V DC, Black 12V DC, White 12V DC / 24V AC, Black 12V DC / 24V AC, White

3-AXIS Varifocal Dome Camera - Effio-E

Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference.

User Manual

Safety Warnings

1. Read this manual carefully before installing the unit

Please read this manual first for correct installation and operation.

2. Never install the camera on a ceiling that cannot hold its weight The product may fall down and cause damages.

3. Never install the camera near electric or magnetic fields Install the camera away from TV, radio transmitter, magnet, electric motor,

transformer, audio speakers since the magnetic fields generate from above devices would distort the video image.

4. Never install or use the camera in areas exposed to water, oil or gas The water, oil or gas may result in operation failure, electric shock or fire. Do

not use this unit near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area which is classified as a wet location.

5. Never face the camera toward the sun Direct sunlight or severe ray may cause fatal damage to sensor and internal

circuit.

6. Power Cord Protection Touching the wet power cord with hands or touching the power cord with wet

hands may result in electric shock. Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, playing particular attention to cords and plugs, convenience receptacles, and the point where they exit from the appliance.

7. Attachments Do not use attachment not recommended by the product manufacturer as

they may cause hazards.

8. Object and Liquid Entry Never push objects of any kind into this product through openings as they

may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the product.

9. Do not operate the camera in environments where the temperature,

humidity or power source is beyond the specified ones

Use the camera in suitable environments where the temperature is within

-10°C~50°C and humidity below 90%. Use the input power source as the specifications listed.

10. Cleaning Unplug the unit from the outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

11. Never disassemble the camera nor put impurities in it Disassembly or impurities may result in trouble or fire.

12. Stop using when the product emits smoke or abnormal heat

13. Servicing Do not attempt to repair this unit yourself as opening or removing covers may

expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

14. Retain Instructions THE SAFETY AND OPERATING INSTRUCTIONS SHOULD BE RETAINED

FOR FUTURE REFERENCE.

Warranty

OKINA USA Products are covered under warranty for one year from the date of purchase. The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information

regarding when and where the product was purchased. We have no other way to verify the purchase record without the serial number on the camera sticker; therefore, it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this

manual, the warranty will be voided immediately. It is the customer’s responsibility to keep the camera in good condition.

3. Video or power cable is cut The video cable and the power cable should not be tampered with. Cutting or

modifying of the cables will result in termination of the warranty.

NOTICE:

The information in this manual was up-to-date when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.

Table of Contents

1. INTRODUCTION ............................................................................ ................................................ 1

1.1 MAIN FEATURES ......................................................... ............................ ........................... ....... 1

1.2 CONTENT LIST ......................................................................................................................... 1

1.3 SPECIFICATIONS ....................................................................................................................... 2

2. CAMERA OVERVIEW .................................................................................................................... 3

2.1 DIMENSIONS ................................................. ........................................................................... 3

2.2 DESCRIPTION OF CAMERA PARTS .............................................................................................. 4

3. OSD OPERATION ......................................................................................................................... 4

3.1 OSD CONTROL BUTTONS .................................................................................... ..................... 5

3.2 OSD OPERATION ................................ ..................................................................................... 6

4. CONFIGURATION ......................................................................................................................... 7

4.1 LENS ..................................................................................................................................... 7

4.1.1 AUTO IRIS .................................................................................................................. 7

4.2 SHUTTER/AGC ..................................................................................................................... 9

4.2.1 AUTO SETUP ............................................................................................................. 9

4.2.2 MANUAL SETUP ...................................................................................................... 10

4.3 NR ........................................................................................................................................ 11

4.4 WHITE BAL (WHITE BALANCE) .............................................................................................. 12

4.4.1 ATW (Auto Trace White Balance) .............................................................................. 13

4.4.2 PUSH ........................................................................................................................ 13

4.4.3 USER1 ...................................................................................................................... 13

4.4.4 USER2 ...................................................................................................................... 14

4.4.5 MANUAL WB (Manual White Balance) ...................................................................... 14

4.4.6 PUSH LOCK ............................................................................................................. 14

4.5 ATR ...................................................................... ....................... ...................... ................... 15

4.5.1 ATR ON .................................................................................................. ................... 15

4.6 BACKLIGHT ........................................................................................................................ 16

4.7 DAY/NIGHT ......................................................................................................................... 17

4.7.1 B/W ........................................................................................................................... 17

4.7.2 DAY/NIGHT ............................................................................................................... 18

4.8 PICT ADJUST ...................................................................................................................... 19

4.9 MOTION DET (MOTION DETECTION) ........................................ .................................... .......... 20

4.9.1 MOTION DET ON ..................................................................................................... 20

4.10 PRIVACY ............................................................................................................................. 22

4.10.1 PRIVACY ON ....... ..................................................................................................... 22

4.11 CAMERA ID ......................................................................................................................... 24

4.11.1 CAMERA ID ON ........................................................................................................ 24

4.12 LANGUAGE ........................................... .................................................. ............................ 26

4.13 CAMERA RESET ................................................................................. ................................ 27

4.14 SAVE ALL ............................................................................................................................ 27

4.15 EXIT ..................................................................................................................................... 27

1. Introduction

SEDX-761AI-B / SEDX-761AI-W / SEDX-761AI-BD / SEDX-761AI-WD are built with Sony’s latest image processor. This super-wide dynamic camera has the capability of achieving resolutions of over 610 TVL. The features include 2D noise reduction, spot removal, strong-light suppression, intelligent motion, face detection and OSD functions. SEDX-761AI-B / SEDX-761AI-W / SEDX-761AI-BD / SEDX-761AI-WD reproduces nearly perfect images like no other.

1.1 Main Features

 1/3" Sony 760H Super HAD CCD II  Sony Effio-E DSP  Color: 610 TVL, B/W: 630 TVL  Color: 0.15 Lux @ F1.2, B/W: 0.1 Lux @ F1.2  Multi-Language OSD Control  ATR Digital Powerful 128x WDR (52dB)  Anti-Headlight (HLC)  2D Noise Reduction  High Contrast Images  Ideal for Backlight Environments  Mosaic Privacy Mask  Advanced Motion Detection Function  Picture Quality Adjustable (Contrast/Sharpness/Hue/Gain)  Built-in Varifocal Lens & Unique 3 Axis Gimble Mechanism  SEDX-761AI-B / SEDX-761AI-W: 12V DC, 2.3W  SEDX-761AI-BD / SEDX-761AI-WD: 12V DC / 24V AC, 2.3W

1.2 Content List

 One (1) SEDX-768AI-B or SEDX-768AI-W or SEDX-768AI-BD or

SEDX-768AI-WD camera with video/power cable

 Two (2) Mounting Screws  One (1) DC Male Connector  One (1) Cleaning Cloth  One (1) Warning Sign Sticker  One (1) User Manual  One (1) CD

* For any returns, please include all components listed above with original packaging in Resalable Condition

missing/damaged or if any cable is cut or tampered with.

. Absolutely No Returns will be accepted if any component is

1.3 Specifications

PIC D-233 D-234 D-239 D-240 Model SEDX-761AI-B SEDX-761AI-W SEDX-761AI-BD SEDX-761AI-WD Base Color Black White Black White Image Sensor 1/3" Sony 760H Super HAD CCD II Total Pixels NTSC: 811(H)x508(V) / PAL: 795(H)x596(V) Resolution ; DSP Color: 610 TVL, B/W: 630 TVL ; Sony Effio-E Minimum Illumination Color: 0.15 Lux @ F1.2, B/W: 0.1 Lux @ F1.2

Wide Dynamic Range

Video Output ; Connector 1.0Vp-p Composite, 75Ω ; BNC

Signal Noise Ratio More than 52dB (AGC off, Weight on) Gamma Correction 0.45 Menu OSD Control Title TITLE (LOCATION) Synchronizing System INTERNAL Digital Day&Night Mode COLOR / B&W / AUTO

Electronic Shutter

MANUAL: 1/50(60), FL 1/120(100), 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000,

Automatic Gain Control AUTO (4 Steps)

White Balance

Back Light Compensation HLC / BLC / OFF Flickerless ON / OFF Dynamic Noise Reduction 2D

Language

ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE /

Motion Detection ; Privacy Automatic IRIS ; Connector Lens Mount Built-in DC Auto IRIS Lens

Lens, Angle of View(H)

Power Input ; Consumption

Operation ; Storage Tem perature Operation ; Storage Humidity

Dimensions 4.88”(DIA) x 3.78”(H) / 124(DIA) × 96(H)mm Net Weight 0.71 lbs / 320g

* Specifications are subject to change without notice PAL version also available

ATR Digital WD (ATR: Adaptive Tone-curve Reproduction) ;

128x Normal Camera (52dB)

1.0Vp-p Composite, 75Ω ; BNC RCA Service Monitor Output

AUTO (1/50(60)~1/100,000sec.) /

1/10,000sec.

ATW / PUSH / USER1 / USER2 / ANTI CR /

MANUAL / PUSH LOCK

SPANISH / SIMPLIFIED CHINESE

ON / OFF (24x16 Zones, Alarm) ;

ON / OFF (8 Zones Programmable, Mosaic)

f2.8 mm~10.5mm / F1.2

Aspherical Auto Iris Lens/ 99.5°~27.4°

12V DC ; 2.3W

12V DC / 24V AC

Internal 12V DC Only ; 2.3W

14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C

Maximum:RH80% ; RH90%

2. Camera Overview

2.1 Dimensions

2.2 Description of Camera Parts

12V DC SEDX-761AI-B SEDX-761AI-W

(1) FAR/NEAR

Dual Power SEDX-761AI-BD SEDX-761AI-WD

To adjust the lens focus for near and far.

(2) WIDE/TELE To adjust the lens angle for wide and tele.

(3) OSD Control Buttons ENTER button

UP & DOWN button LEFT & RIGHT button

(4) VIDEO Connector This is an output for BNC connection to a video monitor, etc (75Ω).

(5) Power Input Terminal Connect the power input of 12V DC for SEDX-761AI-B / SEDX-761AI-W.

(6) Power Input Terminal Connect the power input of 12V DC / 24V AC for SEDX-761AI-BD /

SEDX-761AI-WD. (7) 12V DC Input (8) RCA Service Monitor Output

(Available for SEDX-768AI-BD / SEDX-768AI-WD only)

3. OSD Operation

3.1 OSD Control Buttons

ENTER

① U (UP)

Use this button to move the cursor upwards to the desired item.

② R (RIGHT)

Use this button to move the cursor to the right to select or to adjust the parameters of the selected item. The parameter increases when the right button is pressed.

③ D (DOWN)

Use this button to move the cursor downwards to the desired item.

④ L (LEFT)

Use this button to move the cursor to the left to select or to adjust the parameters of the selected item. The parameter decreases when the left button is pressed.

⑤ ENTER

Use this button to display the main menu, to confirm and to enter the submenus when they’re available. Items with the symbol “

<┘” in the end

contain sub-menus. For further settings of those items, select the desired item with the button c or d and press the ENTER button to bring up the sub-menu and edit.

3.2 OSD Operation

ENTER

1. Start to operate the OSD menu

Press the ENTER button to bring up the OSD main menu to start operating OSD menus.

2. Select items with the cursor buttons

Use buttons c and d to move the cursor up and down.

Use buttons e and f to switch the modes or to adjust the parameters or

the values of the settings.

3. Switch to the sub-menu

SETUP MENU

LENS AUTO<┘ SHUTTER/AGC AUTO<┘ NR <┘ WHITE BAL ATW<┘ ATR OFF BACKLIGHT OFF DAY/NIGHT AUTO<┘ NEXT<┘ EXIT<┘ SAVE ALL<┘

Items with the symbol “<┘” in the end contain sub-menus. For further settings of those items, select the desired item with the button

ENTER button to bring up the sub-menu and edit.

SETUP MENU

LENS AUTO<┘ SHUTTER/AGC AUTO<┘ NR <┘ WHITE BAL ATW<┘ ATR OFF BACKLIGHT OFF DAY/NIGHT AUTO<┘ NEXT<┘ EXIT<┘ SAVE ALL<┘

Main Menu

4. Return to the previous page

Select RETURN and press the ENTER button to return to the previous page.

5. Exit the OSD menu

Select EXIT with the button c or d and press the ENTER button to exit the OSD menu.

c or d and press the

AUTO IRIS

TYPE DC MODE AUTO SPEED ||||

RETURN<┘

||||||||||| 080

Sub-Menu

+ 21 hidden pages

Okina SEDX-761AI-B, SEDX-761AI-BD, SEDX-761AI-WD, SEDX-761AI-W User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual