Okina SEDX-761AI-VD, SEDX-761AI-VDD Quick Setup Manual
SEDX-761AI-VD 12V DC
SEDX-761AI-VDD
12V DC / 24V AC
3-AXIS Vandalproof Dome Camera
Effio-E
** Please refer to User Manual CD for detailed information **
DIMENSIONS (Unit: mm)
DESCRIPTION OF CAMERA PARTS
(1) FAR / NEAR
To adjust the lens focus for near and far.
(2) WIDE / TELE
To adjust the lens angle for wide and tele.
(3) OSD Control Buttons
ENTER button
UP & DOWN button
LEFT & RIGHT button
(4) VIDEO Connector
This is an output for BNC connection to a video monitor, etc. (75Ω).
Quick Setup Guide
FEATURES
1/3" Sony 760H Super HAD CCD II
Sony Effio-E DSP
Color: 610 TVL, B/W: 630 TVL
2.8mm~10.5mm Aspherical Auto Iris Lens
Color: 0.15 Lux @ F1.2, B/W: 0.1 Lux @ F1.2
Multi-Language OSD Control
ATR Digital Powerful 128x WDR (52dB)
Anti-Headlight (HLC)
2D Noise Reduction; High Contrast Images
Ideal for Backlight Environments
Mosaic Privacy Mask
Advanced Motion Detection Function
Picture Quality Adjustable (Contrast/Sharpness/Hue/Gain)
Water Resistance: IP66 ; Breaking Strength: 656.1Kgf
Built-in Varifocal Lens & Unique 3 Axis Gimble Mechanism
3-AXIS Bracket
SEDX-761AI-VD: 12V DC, 2.3W
SEDX-761AI-VDD: 12V DC / 24V AC, 2.3W
PACKAGE CONTENTS
One (1) SEDX-761AI-VD or SEDX-761AI-VDD camera with
video/power cable
Three (3) Mounting Screws
Three (3) Wall Anchors
One (1) Allen Wrench
One (1) Star Wrench
One (1) DC Connector
One (1) Cleaning Cloth
One (1) Warning Sign Sticker
One (1) Quick Setup Guide
One (1) CD with User Manual
* For any returns, please include all components listed above with
original packaging in Resalable Condition
be accepted if any components are missing/damaged or if any cable is
cut or tampered with.
U
ENTER
RL
D
(5) Power Input Terminal
Connect the power input of 12V DC for SEDX-761AI-VD or
12V DC / 24V AC for SEDX-761AI-VDD.
(6) Secondary Power Input Terminal
Connect the power input of 12V DC (Available for
SEDX-761AI-VDD only).
(7) Secondary VIDEO Connector for Service Monitor
This is an RCA output (Available for SEDX-761AI-VDD only).
. Absolutely No Returns will
ENTER
U
RL
D
Copyright © 2010. All Rights Reserved.
www.okinausa.com 1 REV012011-V06
(
SPECIFICATION
PIC D-236 D-242
Model SEDX-761AI-VD SEDX-761AI-VDD
Image Sensor 1/3" Sony 760H Super HAD CCD II
Number of Total Pixels NTSC: 811(H) x 508(V) / PAL: 795(H) x 596(V)
Resolution ; DSP Color: 610 TVL, B/W: 630 TVL ; Sony Effio-E
Minimum Illumination Color: 0.15 Lux @ F1.2, B/W: 0.1 Lux @ F1.2
Wide Dynamic Range
Video Output ; Connector 1.0Vp-p Composite, 75Ω ; BNC
Signal to Noise Ratio More than 52dB (AGC off, Weight on)
Gamma Correction 0.45
Menu OSD Control
Title TITLE (LOCATION)
Synchronizing System INTERNAL
Digital Day&Night Mode COLOR / B&W / AUTO
Electronic Shutter
Automatic Gain Control AUTO (4 steps)
White Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH LOCK
Back Light Compensation HLC / BLC / OFF
Flickerless ON / OFF
Dynamic Noise Reduction 2D
Language
Motion Detection ; Privacy
Lens Mount Built-in DC Auto IRIS Lens
Lens, Angle of View (H) 2.8mm~10.5mm / F1.2 Aspherical Auto Iris Lens / 99.5°~27.4°
Water Resistance IP66
Max. Breaking Strength 656.1 Kgf
Power Input ; Consumption 12V DC ; 2.3W 12V DC / 24V AC ; 2.3W Internal 12V DC Only
Operation ; Storage Temp. 14˚F~122˚F ; -4˚F~140˚F / -10˚C~50˚C ; -20˚C~60˚C
Operation ; Storage Humidity Maximum: RH80% ; RH90%
Dimensions 5.51”(DIA) x 4.41”(H) / 140mm(DIA) x 112mm(H)
Net Weight 2.09 lbs / 950g
* Specifications are subject to change without notice.
PAL version also available.
OSD OPERATION
Use OSD Control Buttons to operate OSD and adjust settings.
ENTER
U
L
R
D
Copyright © 2010. All Rights Reserved.
www.okinausa.com 2 REV012011-V06
SETUP MENU
LENS AUTO<┘
SHUTTER/AGC AUTO<┘
NR <┘
WHITE BAL ATW<┘
ATR OF F
BACKLIGHT OFF
DAY/NIGHT AUTO<┘
NEXT<┘
EXIT<┘ SAVE ALL<┘
ATR Digital WD (ATR: Adaptive Tone-curve Reproduction) ;
MANUAL: 1/50(60), FL 1/120(100), 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/10,000sec.
ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN / PORTUGUESE / SPANISH /
ON / OFF
128x Normal Camera (52dB)
1.0Vp-p Composite, 75Ω ; BNC
RCA Service Monitor Output
AUTO (1/50(60)~1/100,000sec.) /
SIMPLIFIED CHINESE
ON / OFF (24x16 Zones, Alarm) ;
8Zones Programmable, Polygonal Mosaic)
1. Start to operate the OSD menu
Press the ENTER button to bring up the OSD main menu to start
operating OSD menus.
2. Select items with the cursor buttons
y Use buttons c and d to move the cursor up and down.
y Use buttons e and f to switch the modes or to adjust the
parameters or the values of the settings.
3. Switch to the sub-menu
Items with “<┘” symbol in the end contains sub-menus. For further
settings of those items, select the desired item with the button c or d
and press the ENTER button to bring up the sub-menu and edit.
4. Return to the previous page
Select RETURN and press the ENTER button to return to the previous
page.
5. Exit the OSD menu
Select EXIT with the button c or d and press the ENTER button to exit
the OSD menu.
Loading...