Okina SDNX-863AI-VD, SDNX-863AI-VDP User Manual

Copyright © 2012. All Rights Reserved.

** Replacing SDNX-F63AI-VD

SDNX-863AI-VD
SDNX-863AI-VDP

Digital Noise Reduction

DNR Super Low Lux Day & Night OSD

Vandal Proof Dome Camera

USER MANUAL

FEATURES

• 1/3” Sony Super HAD CCD II; 630 TV Lines

• 2.8mm~12.0mm Auto Iris Lens

• RCA Video Output for Service Monitor

• Digital Noise Reduction (DNR)

DNR dramatically reduces both random and fixed noise. It also reduces DVR disk
space usage by up to 70%.

• 0.00039 (Sens-up, 256X) / 0.1 Lux (50 IRE @ F1.4)

• Mechanical IR Cut Filter (ICR)

• On-Screen Display (OSD)

• RS485 Output for OSD Control

• Dual Power 12V DC / 24V AC

• IP66 Rating

1

2

3

New additional features x3

2

Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems).

This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this pro duct is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could other wise be caused by inappropriate
waste handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you
purchased the product.

CAUTION

1. Never point the camera toward the sun

Do not expose the lens directly to the sun or to strong light as this may damage the

pick-up device.

2. Handle this camera with care
Avoid any shock or bumping of the camera. Improper handling could damage the

camera.

3. Requires a proper operating environment
This camera is designed for indoor use. The allowable temperature range for

operation of this camera is between 14°F ~ 122°F / -10°C ~ 50°C.

Please read the Manual before attempting to use this product.

Specifications and appearance are subject to change without notice.

3

4. Clean the front face or lens
It is recommended that the surface be cleaned every 3~6 months. Cleaning should be

done by using a chamois, a very fine soft cloth, lens tissue, or cotton tipped applicator
and ethanol to carefully remove any fingerprint or dust.

5. Check the power source voltage
The power source voltage should be within the specified range. (Camera must meet

the specifications). Camera must be connected to a surge protector at all times.

6. Objects and liquid entry
Never push objects of any kind into this camera as this may touch dangerous voltage

points of short out parts that could result in a fire or electric shock. Never spill any kind
of liquid on the video product.

7. Servicing
Do not attempt to service this video product by yourself as opening or removing

covers may expose you to dangerous voltage or other hazards. Refer all service to
qualified servicing personnel.

8. Damage requiring service
Unplug this video product from the wall outlet and refer service to qualified servicing

personnel under the following conditions:

a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the video product.
c. If the video product has been exposed to rain or water.
d. If the video product has been dropped or the cabinet has been damaged.
e. When the video product exhibits a distinct change in performance.

LIMITED WARRANTY

OKINA USA products are covered under warranty for one (1) year from the date of
purchase. The warranty will automatically be voided if any of the following occurs:

1. Camera sticker is removed

If the camera sticker is removed, we will not be able to confirm any information

regarding when and where the product was purchased. We have no other way to
verify the purchase record without the serial number on the camera sticker; therefore,
it should not be removed.

2. Camera is modified in any way

If the camera is scratched, damaged, or modified in a manner not described in this

manual, the warranty will be voided immediately. It is the customer’s responsibility to
keep the camera in good condition.

3. Video or power cable is cut
The video cable and the power cable should not be tampered with. Cutting or

modifying of the cables will result in termination of the warranty.

4

PACKAGE CONTENTS

A. One (1) DNR Vandal Proof Dome Camera with power/video cable
B. One (1) Allen Wrench
C. Four (4) Mounting Screws
D. Four (4) Wall Anchors
E. Four (4) Screw Washers
F. One (1) Mounting Sticker Template
G. One (1) User Manual

* For any returns, please include all components listed above with original packaging in

Resalable Condition

. Absolutely No Returns will be accepted if any component is

missing/damaged.

DIMENSIONS

A. B. C. D.

E. F. G.

5

PARTS AND FUNCTIONS

1. Cover

2. Lens

3. On-Screen Display (OSD) Control

4. RCA Video Output for Service Monitor

5. Base

6. RS485

, +/- (+ Yellow / - Orange) – See page 10 for PTZ controller key

combination to call up OSD menu and page 11 for OSD setting

7. Power In, 12V DC~24V AC

8. BNC Video Out

OR

PTZ-KB250

PTZ-KB050X