Okina L08FF-04, L08FF-08, L08FF-16 Setup Manual

L08FF-04
L08FF-08
L08FF-16

ECO H.264 DVR

Setup Guide

Package Content

Inspect the packaging carton. Make sure the ECO H.264 DVR is properly delivered. Remove all

items from the box and make sure the box contains the following items.

ECO H.264 DVR SATA Cable

Front Panel

Power

Adaptor

Power Cord

User’s

Manual

1 Channels

2 Power LED

3 Alarm LED

4 Network LED

5 Record LED

6 ENTER

7 ESC

8 Direction Keys

1. In Live and Playback modes, press any key to view the corresponding
video in full-screen.

2. In input interface, 1~10 can be used for direct input of numbers 0~9.

3. In Dome Camera Control mode, 1 is for entering the Set/ Go preset
menu; 2 is for hiding or displaying the hint screen; 11~16 is for quick
access of preset points 1~6.

It lights up when power source is connected.

It lights up when an alarm is triggered.
It lights up when network is connected. In addition, it blinks when data is

being transmitted via the network.
It blinks when videos are being recorded.

1. In OSD menu or selection interface, press these key to make the
selection or save settings.

2. In live full-screen viewing mode, press this key to view a 2× zoom
image; press it again to return.

Press this key to cancel or exit from certain control mode.

1. In Zoom mode, these keys function as normal direction keys.

2. In the OSD setup menu, the direction keys are used to move the
cursor to previous or next fields. To change the value in the selected
field, press UP / DOWN keys.

00P5L3080ZSEA4 1

9 USB 2.0 Port

10 CALL

11 COPY

The USB 2.0 port allows users to connect an external USB device to the
unit, such as a USB ThumbDrive or a USB mouse.
Press this key to enter Call Monitor Control mode. (8CH & 16CH models
only)

This key is used for marking time in quick video export function.

12 DOME

13 SEQ

14 FREEZE

15 PLAY/STOP

16 MODE

17 SEARCH

18 MENU

Rear Panel

LAN 10/100M

1

(RJ-45)

Main Monitor-

2

VGA(optional)

Audio In

3

Call Monitor

4

Audio Out

Call Monitor

5

(BNC)

Video In

6

(BNC)
USB Port This USB port allows users to connect a PS/2 mouse via a converter.

7

Alarm I/O &

8

RS-485
Main Monitor

9

Audio Out
Main Monitor-

10

BNC

Power Jack

11

Press this key to enter Dome Camera Control mode.

Press this key to start automatic sequence display of cameras.

Press this key to freeze the current viewing screen.

Press once to start the playback of recorded video. Press again to exit.

Press this key to view in full-screen or multiple window modes.

Press this key to search recorded video by date/time or event.

Press this key to enter the OSD setup menu.

The DVR is capable of networking. Once the unit is connected to the LAN
network, users can remotely access the DVR through the remote
software on a PC.

The DVR can connect to a monitor via an optional VGA connector.

Audio In connectors are for the DVR to connect audio source devices.
For 4CH models, 4 RCA Audio In connectors will be provided; whereas
for 8CH and 16CH models, a D-Sub Audio In connector is provided.
Call Monitor Audio Out RCA connectors are provided for the DVR to
connect audio output devices (e.g. amplified speakers). (8CH & 16CH
models only)
The call monitor is used to display full screen video of all installed
cameras in sequence. The BNC Call Monitor connector allows users to
connect the DVR with an optional call monitor. (8CH & 16CH models
only)
A group of BNC connectors is provided for video input streams from
installed cameras.

The DVR provides alarm I/O and RS485 ports that offer users the
flexibility required to connect the DVR to other devices.
Main Monitor Audio Out RCA connectors are provided for the DVR to
connect audio output devices (e.g. amplified speakers).

The DVR can connect to a monitor via a BNC connector.

The DVR has a free voltage DC power connection jack. Please connect
the power supply adapter shipped with the unit.

2

Pin Definition of Alarm I/O & RS-485, and Audio In

Alarm I/O & RS-485:

4CH models:

Pin Definition Pin Definition Pin Definition Pin Definition

1 Alarm Out Open 5 Alarm In 1 9 Alarm Out Close 13 GND
2 Alarm Out COM 6 Alarm In 2 10 GND 14 GND
3 RS485 D+ 7 Alarm In 3 11 GND 15 GND
4 RS485 D− 8 Alarm In 4 12 GND

8CH & 16CH models:

Pin Definition Pin Definition Pin Definition

1 Alarm Out Open 10 Alarm In 5 19 Alarm In 10 (16CH)
2 Alarm Out COM 11 Alarm In 6 20 Alarm In 11 (16CH)
3 RS485 D+ 12 Alarm In 7 21 Alarm In 12 (16CH)
4 RS485 D− 13 Alarm In 8 22 Alarm In 13 (16CH)
5 Reserved 14 Alarm Out Close 23 Alarm In 14 (16CH)
6 Alarm In 1 15 Reserved 24 Alarm In 15 (16CH)
7 Alarm In 2 16 Reserved 25 Alarm In 16 (16CH)
8 Alarm In 3 17 Reserved
9 Alarm In 4 18 Alarm In 9 (16CH)

Audio In:

Pin Definition Pin Definition Pin Definition Pin Definition

1 Audio 1 8 Audio 15 (16CH) 15 Audio 4 22 GND
2 Audio 3 9 GND 16 Audio 6 23 GND
3 Audio 5 10 GND 17 Audio 8 24 GND
4 Audio 7 11 GND 18 Audio 10 (16CH) 25 Reserved
5 Audio 9 (16CH) 12 GND 19 Audio 12 (16CH)
6 Audio 11 (16CH) 13 Reserved 20 Audio 14 (16CH)
7 Audio 13 (16CH) 14 Audio 2 21 Audio 16 (16CH)

Power On the DVR

Please follow the proper power on procedures to avoid damaging the DVR.

• Connect all necessary components, e.g. monitor and cameras, before power on the DVR.

• Check the type of power source before connecting the power adaptor to the DVR. The

acceptable power input is between AC110V ~ AC240V.

Select Viewing Mode:

• Press MODE repeatedly to select the wanted display mode. The available viewing modes are

full-screen, 2×2, 3×3, and 4×4 split-window.

• Press FREEZE to pause the current viewing image.

• Refer to the following for a brief description of some icons that will be shown on the monitor.

Icon Description Position Icon Description Position

Playback Mode Lower-left corner Key Locked Center-bottom

►

N Not Logged-in Upper-right corner 1~8 User’s Authority Level Upper-right corner

3