OKAYLIGHT TS-808, OPS100+, OTS100 User Manual

Remote
Thermostat

+ / ON - / OFF

TARGET

CURRENT

ON OFF

Plug in socket
EU type

Plug in socket
UK type

Plug in socket
USA type

WIRELESS
THERMOSTAT

WIRELESS
THERMOSTAT

WIRELESS
THERMOSTAT

WIRELESS
THERMOSTAT

FEATURES

Plug and play type,no need installaon

LCD with green backlight
Display Current temperature
Display Target temperature

Automac learn code/Manually learn code
Always ON/OFF funcon(Remote control)

°C/ °F switchable
High/Low temperature warning

Easy seng with memory funcon
Low baery warning
Room thermostat
RF 433Mhz RF technology
Mul-channels,one remote can control

Portable design,hold in hand/
Stand on table/wall mounted

Heang Mode or Cooling Mode switchable

mul plugs

3. HEAT MODE( ) / COOL MODE( )

This wireless thermostat is designed with HEAT mode
and COOL mode, two mode is switchable as below steps:

Reload the batteries for remote thermostat,the heating
symbol( ) will be flashing,you can press +/ON or -/OFF
button ,switch to cooling symbol( ),after choose your
wanted mode, wait for 8~10seconds, heating symbol or
cooling symbol will stop flashing.
When you reload batteries for remote thermostat next
time,the mode symbol is memorized as your last choice,
if you don’t want to change mode, just wait for 8~10 s.

The Wireless Thermostat is intended for automatic control of
electrical heating appliances or cooling appliances and consists
of 2 components: a Remote Control Unit with intergrated temper­ature sensor and a Plug in Socket Unit.

It will automatically turn on/off heating devices or cooling devices
as your preset target temperature,to maintain a stable room temp­erature in order toprovide comfort and save energy.

1. INTENDED USE AND PRINCIPLE OF OPERATION

select Heat ( ) or cool mode( )

select Heat ( ) or cool mode( )

or display Cool symbol;

+ / ON - / OFF

TARGET

CURRENT

ON OFF

WIRELESS
THERMOSTAT

4. DESCRIPTION

Transmitter,Remote thermostat control:

Receiver, Plug in socket:

CURRENT temp. range: 0.0 °C~70 °C or 32.0 °F~158.0 °F
TARGET temp. range: 0

°C

~70 °C or 32 °F~158 °F

CURRENT Temperature resolution: ±1

°C / °F

Batteries: 2PCS*1.5V AAA battery

Low temperature: ≤0.0

°C

, CURRENT Shows LL

High temperature: ≥70.0

°C

,CURRENT Shows HH

Wall mounted holder & Table stand

Transmission Frequency: 433.92MHz
Maximum Range: 20 meters in open area
Maximum Rating:
EU type: 230V/16A/50Hz, 3680W Max.
UK type: 250V/13A/50Hz,3250W Max.
USA type: 110V/15A/60Hz, 1800W Max.

2. SPECIFICATION

MADE IN CHINA

EU

symbol flash

User Manual

Product Name:WIRELESS THERMOSTAT

Brand: OKAYLIGHT

Model:OPS100+OTS100,TS-808

Manufacture: Okaylight Electronic Co.,LTD

5. AUTO CODING

5

8. ALWAYS ON MODE

Fig.5

This wireless thermostat can be used as remote control
socket. You can manually turn ON or turn OFF connected
home appliances remotely by this item,such as your home
lighting,TV,FANS,Radios,etc.

In auto operation mode, set
TARGET temperature is
far higher than CURRENT
temperature, so that transmitter
always show ON symbol, see Fig.7.

- OFF: Then hold and press -/OFF
button for 3 seconds to turn
off home appliances remotely.

- ON: Hold and press +/ON button for 3 seconds
to turn on home appliances remotely again.

10. REMOTE CONTROL FUNCTION

ON

Fig.7

6. AUTO OPERATION IN HEAT MODE( )

Fig.1

Fig.2

9. ALWAYS OFF MODE

Fig.6

6

7. AUTO OPERATION IN COOL MODE( )

If you want to control cooling devices, please switch to cool mode.
In cool mode, the operation is oppsite to heat mode.

When target temp. is lower than current temp.(Fig.3)

1. Thermostat control send commands to turn on all
connected sockets.

2. LCD display ON,red LED indicator is ON.

3. The connected cooling devices will cool the room

As the cooling device works,current temperature will be
decreasing and approach the same as target temprature.(Fig.4)

1. Thermostat control send commands to turn off all the
connected cooling devices.

2. LCD display OFF symbol

3. Red LED indicator is OFF.

When current temperature increases by 1 , ON
commands is sent to turn on all connected cooling
devices again.

So the room temperature will remain between:

Target Temp.≤ Room Temp.≤Target Temp.+1

TARGET

CURRENT

ON

TARGET

CURRENT

OFF

Fig.3

Fig.4

Manually coding

You can press once or button,then wait for
3 seconds, thermostat control will send pairding code,
and Green LED flash once.

During AUTO OPERATION in Heat or Cool mode: