Okamura Alt Piazza Instruction Manual

Materials and Surface Finish

Part Materials Surface finish

Surfacing, coaming Melamine board ー

Tabletop

Leg Leg, tray Steel Baking finish
Base Base Steel Baking finish

Adjuster

 > XX < indicates the materials of the parts. This information is useful for recycling.

 Please understand that product specifications might change without prior notification due to improvements made to the

product.

Core material MDF ー
Rear surface Phenol ー

Main body Recycled ABS 〉Recycled ABS〈ー
Axle part Steel ー

Creative Furniture

アルトピアッツァ

Series

【Cafe table】

Instructions for Use

OKAMURACORPORATION

INTERNATIONALSALES&MARKETINGDIVISION
2-14-27,Akasaka,Minato-ku,Tokyo107-0052,JAPAN
Tel:[phone]Fax:[phone]

www.okamura.jp

http:

//

/

GD2968
2019-02

Cafe table

900 φ

Cafe table

600W× 750D

Safety Instructions (Make sure to follow these instructions)

Installation

Caution

User must follow this instruction to prevent accidents and injuries, or damages to
their property.

■ Instruction on caution label

● The caution label shown on the

right is attached on this product
to avoid safety hazards or
damage to the user's life, body,
and property. Use this product
observing the written cautions.

● Do not tear, damage, erase

words of, or remove the label.

Do not lean against or sit
on the table. It may cause
you to fall and result in
injury.

Do not handle roughly, or use
improperly. It may cause injury or
damage to the product.

● Do not use as a stepstool.

If the product is found unstable due to
loosening of bolts or screws, retighten
them.

Be careful of the following items since
they may cause injury or damage the
product.

● Do not lean on or sit on the tabletop.

● Do not use the product with any part loose or

missing.

● Do not move the product while objects are

placed on the tabletop.

Do not use with bolts and screws
loosen.
It may cause damage to the product
and result in injury.

Do not disassemble or repair on your
own.

● Do not attempt to disassemble or repair the

product yourself. Please contact our official
dealers when needed.

Caution

Caution

Consult your local distributor or our
official dealer for the available optional
items.

Do not modify on your own.
This leads to malfunction or accident.

● Modifying the product by yourself may cause

the product to malfunction.

Okamura is not responsible for any damages

caused by modification.

● Please contact an official Okamura dealer

in advance when the product requires any
modifications.

Do not exceed the maximum loading
capacity as it may result in collapse or
damage.

Loading part Maximum loading capacity

Tabletop

 What is “Uniformly distributed weight”?

It means to load on a work surface, etc. evenly.
Uneven loading on the product may cause balance
loss and thus drop or fall.

30kg (66lb)

(uniformly distributed weight)

Please follow instructions below.
Failure to do so may cause serious damage to the product and Okamura will have no
responsibility for any disadvantages.

Use the product indoors.

● Do not use outdoors or near water. It may

cause warping or mold.

Do not expose the product to direct
sunlight. It causes distortion or
discoloration of the product.

● Always use curtains, blinds, or the like to

protect the product from direct sunlight when
placing it next to windows or the like.

Do not place the product under a heater
or air-conditioner exhausting high
temperature air.

Place the product on a horizontal
surface.

● Be sure to place the product on a horizontal

surface. Failure to do so may cause
deformation of the product.

● Use the adjuster to keep the product

horizontal to the floor surface.

Avoid high temperature, high humidity,
or extraordinary aridity.

Part Names

■

Cafe table (base diameter 600φ)

(900φ/750φ/750 square)

Tabletop

Leg

Base

Adjuster

■ Cafe table (base diameter 450φ)
(600φ/450φ)

Leg

■ Cafe table (rectangle)
（600W×750D）

Leg

Tabletop

Tabletop

Base

Adjuster

Appropriate Ventilation Measures

● Many chemical substances will be released by the product when it is first purchased. Sufficiently

ventilate or expose the product to moving air for some time after purchasing it.

● Do not completely close windows when using the product in rooms with conspicuously high
temperatures/humidity (the benchmarks for these are temperatures in excess of 28°C (82.4°F) and
relative humidity in excess of 50%).

1 2

Base

Adjuster