Ohsung Electronics URCDMSOUT Users Manual

Order Number

: GETEC-C1-16-414

FCC Part 15 Certification

Test Report Number

: GETEC-E3-16-052 Page 1 / 1

APPENDIX G

: USER’S MANUAL

EUT Type: Stream Injector Output Device

FCC ID.: OZ5URCDMSOUT

DMS-OUT

Owner’s Manual

Universal Remote Control

www.UniversalRemote.com

DMS-OUT Owner’s Manual

Overview

The DMS-OUT allows 3rd party devices access to the streaming sources in
the DMS Audio Network. For example, this device is the perfect solution for
adding any new/existing 3rd party AVR, soundbar, or other audio device to
the DMS Audio Network.

Online Help:

www.urccontrolroom.com

For software downloads, training materials, and frequently asked questions.

Contact Support:

Total Control is a URC product sold through Authorized Dealers, for
questions or assistance contact you Custom Installer/Programmer (write in
the company name, email, and contact info):

Table of Contents

Features and Benefits.........................................1

Parts & Pieces......................................................1

Requirements......................................................1

Rear Panel............................................................2

Top Panel & LED States......................................4

Bottom Panel.......................................................5

Wiring the DMS-OUT..........................................6

or URC Technical Support at: [e-mail]

Universal Remote Control, Inc.

500 Mamaroneck Ave

Harrison, New York 10528

Toll Free: [phone]

Main: [phone]

Universal Remote Control

DMS-OUT Owner’s Manual

Features and Benefits

The DMS-OUT is loaded with features to provide the perfect audio experience. Enjoy features such as:

● 3rd Party Audio Device Integration

DMS-OUT grants 3rd party devices the ability to use sources that are available in the DMS Audio Stream.

● Audio Sensing Capability

The DMS-OUT, similar to the URC Audio Sensor (SEN-AUD), can detect an audio signal which can then trigger n activity (macro).

● Flexible Power Source

Use the supplied 5V DC power adapter or take advantage of the DMS-OUT’s PoE (Power Over Ethernet) capability using a CAT 5/6 wiring.

Parts & Pieces

Contained within the DMS-OUT box:

1. DMS-OUT Preamplifier Device

2. 5v DC Power Adapter

3. Wall Mount and 4x Screws

Requirements

As with all Total Control products, the DMS-OUT is not a
plug-and-play device. It requires programming by a
certified Total Control installer in order to work properly.

Be sure the system contains the following:

● MFS-8 or MFSPOE-8

● MRX-10 or MRX-8 Master System Controller

● URC User Interface (TRC-1080, TKP-7000, etc.)

Page 1

DMS-OUT Owner’s Manual

Rear Panel:

5V DC Input:

Provides power to the DMS-OUT. PoE may be used
as a substitute.

Analog Input:

Standard RCA (analog) connector.

Digital Input - Optical:

This input uses standard S/PDIF OPTICAL TOSLINK
connector.

Note: The DMS-OUT converts Dolby Digital 5.1/DTS 5.1
to a DMS Stream.

Page 2

DMS-OUT Owner’s Manual

Digital Input - Coax:

Standard RCA (analog) connector, this receives
bitstreams of audio data.

Note: The DMS-OUT converts Dolby Digital 5.1/DTS 5.1
to a DMS Stream.

LAN Port:

This 10/100 Ethernet port supports PoE and sends
the URC Audio stream through the local network,
this is also how the DMS-OUT receives commands
and sends audio.

Note: The DMS-OUT does not support Wi-Fi

Page 3