OHM PATCH PANEL PP-1 User Manual
PP-1
PA TCH
PANEL
USER MANUAL
CONTENTS
...........................................Wiring Instructions ... 7
Important Information..................................... 3-4
Introduction
Unpacking
Mounting
Precautions
-6Operating Instructions...................................... 5
Front Panel
Rear Panel
2
Specifications .................................................... 2
Specifications
Power Supply.......................................
Protection...........................................
Power Input Connector..........................
Indicators...........................................
Power Output Connectors......................
Sequencer...........................................
Assignable Matrix.................................
Signal Connectors................................
Link Connectors...................................
Ethernet Connection.............................
USB...................................................
Goose Neck Light.................................
DimensionsHxWxD(mm).................
Weight (Kgs).......................................
AC 230V 50HZ
MCB Rated at 32 Amps
C32 Socket (provided)
Live, Neutral, Earth, Sequencer 1 to four
Powercon - NAC3MPB
©
Push-on, Push-off switch.
Inputs8xPairPomona Sockets
(Pomona Plugs Provided)
Outputs Speakons 4 x NL4MP
2 x NL8MP
Female XLR
Male XLR
RJ45
2 x USB Sockets
Goose Neck Light on USB Connector
89 x 483 x 455
In Carton 140 x 570 x 610
Net Weight 9
In Carton 10.8
Output................................................
AspartofourcontinuousR&Dprogramme reserve the right to change specifications without prior notice
E&O.E.
3
PP-1 PATCH PANEL
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
USER MANUAL
PP-1 PATCH PANEL
The information contained within this manual does not include all of the details of design, production or
variations of the equipment. Nor does it cover every possible situation that may arise during installation,
operation or maintenance. If you need particular assistance beyond the scope of this manual please contact our
technical staff.
WARNING! RISK OF HAZARDOUS ENERGY!
TO REDUCE RISK OF ELECTRIC SHOCK OR FIRE DO NOT
EXPOSE TO RAIN OR MOISTURE.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
UNIT MUST BE EARTHED AND CORRECTLY FUSED.
The lightning bolt triangle is used to alert
the user to the presence of un-insulated
“dangerous voltage” within the unit that
may constitute a risk of electric shock.
The exclamation mark triangle is used to
alert the user to important operating or
maintenance instructions in the
literature accompanying the product.
CE Conformity
This equipment has been tested and found to conform
to the requirements of the EMC Directive 89/336/EEC,
the requirements of the Low Voltage Directive
73/23/EEC, amended by 93/68/EEC and to the
following standards:
EMC Emission EN55103-1 (1996)
EMC Immunity EN55103-2 (1996)
Electrical Safety EN60065 (1998)
Features
!
!
!
!
!
!
!
!
!
!
8 x Pairs of Inputs on Binding Post
2 x Outputs on 8 way Speakon Connector
4 x Outputs on 4 way Speakon Connector
Sequential Start
Trip Switch
4 x Network Connectors
Inputs and Links on XLR
2 x USB Sockets / USB Goose neck light
Power on C32 Sockets
Attractive styling
Wellington Close • Parkgate • Knutsford
Cheshire • WA16 8XL • England
Tel: +44 (0)1565 654641 • Fax: +44 (0)1565 755641
Email: info@ohm.co.uk • Website: www.ohm.co.uk
Loading...