OHM CL-1TD User Manual

CL-1TD

serious about sound

Features

Discrete elegant lines, minimal physical
intrusion from ceiling when installed.

Installation and maintenance made
simple through use of the integral ceiling
bracketry.

Made from durable materials including a
metal enclosure for f re safety.

Applications

Distributed audio/public address system
component, for commercial and retail
sector areas.

Widely used in a variety of areas such
as: hotels, shopping malls, schools,
religious establishments, hospitals and
conferencing.

CEILING SPEAKER

CL Series Ceiling Speakers

OHM believe that the sound in a venue should be uncompromised, including the often overlooked secondary
areas. To this end we are proud to introduce ceiling speakers within our range of systems so that the performance
and aesthetic design expected of OHM products can be consistent throughout the venue.

Additional models have been introduced for applications that require metal f re domes to comply with f re regulations.
The plastic parts are moulded in f re retardant graded materials.

CL-1TD

The CL-TD range of full range ceiling speakers are all enclosed in a metal domed casing to comply with the f re
regulations in coountries. Using the same quick mount system as the rest of the CL family, the CL-1TD has a built
in crossover and will handle 30 watts RMS.

Contents

1 x CL-1TD loudspeaker
1 x Instruction Sheet
1 x Mounting cutout template

Thank you for purchasing the OHM CL-1TD, please take the time to check all items are present and undamaged.
If there is damage to the carton on delivery please ensure this is written on the delivery note and if a claim is
required contact the delivery company as soon as possible. Only the consignee can f le a claim against the carrier
for shipping damage. Be sure to save the carton and all packing materials for the carriers inspection.

Please take the time to f ll in the guarantee card included with this ceiling speaker and return it to OHM retaining
the customer portion for your records. Non compliance will not affect your statutory rights but may affect any claim
in respect of time bound failures.

Please note specif cations may be subject to change without notice. E & O.E

Technical Specifi cation

Product Features

Design

Woofer

Impedance

Power Handling RMS

Programme Watts

SPL 1W/1m (dB)

Max @1m (dB)

Frequency Response

Dispersion

Crossover Frequency

Full Range

5 inch

8Ω / 100V / 70V

15 Watts

30 Watts

88 dB

102 dB

150Hz-20kHz

140° Conical

4kHz

Ceiling Thickness

Hole Cutout Ø

Dimensions Ø x H

Weight

Connector

Tappings

100V 20W 10W 5W 2.5W

70V 10W 5W 2.5W 1.25W

IMP (Ω) 500 1k 2k 4k

Colour

Speaker Cables

10 - 35 mm

Ø170 mm

Ø203 x 145mm

1.7 kg

Spring loaded terminal

-

20W

250

White Ral9003

Minimum Diameter 2.5mm

2

Installation Instructions

The installation of this OHM product couldn’t be easier:

1. Ensure there is enough clear space to house the speaker.

2. Take the template provided, position on the ceiling at the point where the speaker will be f tted, draw around
the circle and cut a hole in the ceiling to f t.

3. Remove the grill from the speaker by gently pushing the mounting poles down until they ease the grill out,
position the rear of the speaker facing into the hole. ( f g. 1)

4. Connect speaker to amplif cation/system ensuring all connections are correct. (f g. 2)

5. Turn the plastic f xing points until the ends are located over the ceiling, tighten the screw until the speaker is
clamped on to the ceiling. (f g. 3)

6. Replace the speaker grill. (f g. 4)

7. Turn on music source and enjoy the amazing sound of the OHM loudspeaker.

Mounting Instructions

Overall Diameter Mounting Diameter Depth