OFM E326-DK User Manual
Model 326 / 326-AA3 / 326-DK / 326-AA3-DK Stars Swivel Chair
336 / 336-AA3 / 336-DK / 336-AA3-DK Moon Swivel Chair
A
4 Units
D
4 Units
G
Casters
5 Units
Steel Base
Parts Listing
B
2 Units
E
4 Units
H
Seat Mechanism
1 Unit
J
Seat Cushion
1 Unit
4 Units
Gas Lift
K
1 Unit
C
F
1 Unit
I
1 Unit
326
336
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1A: Insert Casters (G) into Swivel Base (J).
If you are assembling a model with a DK Foot Ring please proceed
STOP
to subsequent pages for drafting kit assembly instructions.
Step 1B: Insert Gas Lift (I) into Swivel Base (J).
Step 2:
Tighten screws with phillips head screwdriver.
Step 3: Attach Seat Mechanism (H) to the Seat Frame (L) with 4 Bolts (C) and
washers (E), using the Wrench (F) that is provided.
If you are assembling a model with optional Adjustable Arms please
STOP
proceed to subsequent pages for armrest assembly instructions.
Step 4:
the rear of the seat back and frame and connect using two short screws (B).
Tighten screws with phillips head screwdriver.
Step 5: Take entire chair frame and place Seat Mechanism (H) onto Gas Lift (I), and press
down firmly to secure.
Attach Seat Cushion(K) to Seat Frame (L) using screws (A) and washers (D).
Place the plastic Seat Back (M / N) onto top of Steel Frame (L). Line up holes in
1
I
2
A
D
Steel Seat Frame
1 Unit
M
Stars Back(326)
1 Unit
L
Moon Back(336)
N
1 Unit
3
WEIGHT CAPACITY: 250 lbs.
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
07.07.2014
G
F
C
EE
4
M
N
B
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
support@ofminc.com
5
919-362-4765 (fax)
www.ofminc.com
Loading...