OFM E1001 User Manual
Model E1001
Casters
5 Units
Gas Lift
1 Unit
Seat Cushion
1 Unit
Screws (1/4”x1-1/4”)
4 Units
Seat Mechanism
1 Unit
Parts Listing
A
Star Base
C
Telescopic Bellows
E
FL/FR Arm Rest
G
Screws (1/4”x1-1/8”)
I
Screws (1/4” x 3/4”)
B
1 Unit
D
1 Unit
F
2 Units
H
2 Units
J
4 Units
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Insert Casters (A) into bottom of Star Base (B). Insert Gas
Lift (C) into center hole of Star Base (B). Cover Gas Lift (C)
with Telescopic Bellows (D).
Step 2: Attach Arm Rests (FL & FR) to Seat Cushion (E) using
Screws (G) for front holes and Screws (H) for back holes.
Tighten with screwdriver.
Step 3: Attach the Seat Mechanism (I) to the Seat Cushion (E),
with arrow on mechanism facing chair front, using Screws (J).
Tighten with screwdriver.
Step 4: Attach Back Cushion (K) to Seat Cushion (E) by inserting
Screws (L) through steel plate and into bottom of cushion.
Step 5: Attach assembled chair to Star Base (B) by inserting top of
Gas Lift (C) into the hole in the center of the Seat Mechanism
(J). Press downly firmly on the Seat Cushion (E) to secure.
1
D
C
B
A
3
4
L
J
E
2
G
5
H
E
F
K
Back Cushion
1 Unit
Allen Key (5mm)
L
Screws (5/16”x1-1/8”)
4 Units
M
1 Unit
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
05.17.2010
I
E
C
E
K
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice) support@ofminc.com
919-362-4765 (fax)
Loading...