Page 1
Model CLT24RD / CLT24SQ / CLT30RD / CLT30SQ Café Height Table
J
E
G
Parts Listing
A
2 Units
C
1 Unit
E
Leg Post Caps
4 Units
G
Leveling Glides
4 Units
I
Top Support Plate
1 unit
B
12 Units
D
1 Unit
F
Center Post Cap
1 Unit
H
Center Post
1 Unit
J
Leg Supports
4 Units
Assembly Instructions
Please read all instructions before assembly.
Step 1a: Attach Leg Supports (J) to Center Post (H) with Screws (B),
using small Allen Wrench (C).
Step 1b:
Attach Center Post Cap (F) to bottom of Center Post (H).
Step 1c: Attach Leg Post Cap (E) and Leveling Glides (G) to
Leg Supports (J).
1
1
J
F
2
1
I
H
B
A
H
3
H
B
Step 2:
Attach Table Top Support Plate (I) to Center Post (H) with
long Screws (A), using long Allen Wrench (D).
K
Table Top
1 Unit
Step 3: Attach Table Top Support Plate to bottom of Table Top (K)
with short Screws (B), using short Allen Wrench (C).
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this table as a step ladder.
2. Check for loose screws and tighten them every 6 months.
03.24.2010
I
K
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...