Page 1
Models 902 / 902-DK / 902-VAM / 902-VAM-DK UtiliStool
Parts Listing
A
Stool Seat
1 Unit
A
B
Gas Lift
1 Unit
C
Gas Lift Bellows
1 Unit
D
5-Star Base
1 Unit
C
B
Assembly Instructions:
Tools Needed: Philips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Insert Casters (E) into 5-Star Base (D).
If you are assembling a model with a DK Foot Ring please proceed
STOP
to subsequent pages for drafting kit assembly instructions.
Step 2: Insert Gas Lift (B) into 5-Star Base (H).
Step 3: Cover Gas Lift (B) with Gas Lift Bellows (C).
Step 4: Carefully place Stool Seat (A) onto the Gas Lift (B),
aligning the holes. Press down on Stool Seat (A)
to secure onto 5-Star Base (D).
D
E
E
Casters
5 Units
WEIGHT CAPACITY: 250 lbs.
CAUTION:
1. Do not use this stool as a step ladder.
2. Check for loose screws and tighten them every 6 months.
04.29.2014
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Page 2
Model DK-2 Drafting Kit Assembly
Parts Listing
A
Circular Foot Rest
1 Unit
B
Tension Knob
1 Unit
B
C
9” Extension Tube
1 Unit
Gas Lift
C / D
Chair Seat
Assembly Instructions
STOP
Please read all instructions before assembly.
Prior to assembly, select only one Extension Tube
for desired Height
9” Extension Tube will change seat height from 24”-28”
12” Extension Tube will change seat height from 27-31”
Step 1: Slide the Circular Foot Rest (A) over the smaller
tapered end of your chosen Extension Tube (C / D).
Step 2: Screw in Tension Knob (B) and tighten to lock
Foot Rest (A).
Step 3: Place the tapered end of Extension Tube (C / D)
into your Chair Base.
Step 4: Insert bottom of Gas Lift Cylinder into the top
end of the Extension Tube (C / D).
Step 5: Place the Chair Seat onto the Gas Lift by
inserting top of Gas Lift into the hole in the
Seat Mechanism.
Step 6: Press down firmly to secure the chair.
Note: Save the left over extension tube for future use.
D
12” Extension Tube
1 Unit
A
Chair Base
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...