OFM 880 User Manual
Model: 880 Club Chair
Parts Listing
B
Caster
4 Units
A
Chair
1 Unit
C
Wrench
1 Unit
STOP
A
Assembly Instructions
Tools Needed: Wrench (provided)
Step 1: Attach the Casters (B) to the
Chair (A) by carefully laying
the Chair (A) onto its back and
screwing the Casters (B) into
the corresponding holes on the
bottom of the chair frame and
tighten using the provided
Wrench (C).
Step 2: Return Chair (A) to upright position.
B
WEIGHT CAPACITY: 500 lbs.
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
07.22.2014
.
161 Tradition Trail
800-520-7471 (voice)
919-303-6389 (voice)
support@ofminc.com
Holly Springs, NC, 27540
.
919-362-4765 (fax)
.
www.ofminc.com
Loading...