OFM 66746 User Manual
Models 66745 / 66746 Mesa Series Mobile Utility Tables
Parts Listing
A
Table Top
1 Unit
B
Mobile Table
(With or Without Doors)
1 Unit
66745
66746
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Align Table Top (A) with the holes on top of the Mobile Table (B).
Attach by inserting 6x16mm Screws (C) up through the underside
of the Mobile Table (B) top and into the Table Top (A).
Tighten using screwdriver.
1
A
C
B
C
6x16mm Screw
4 Units
Assembly Notes:
During assembly, hand tighten screws only. When all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this table as a step ladder.
2. Check for loose screws and tighten them every 6 months.
01.15.2014
161 Tradition Trail, Holly Springs, NC, 27540
800-520-7471 (voice)
919-303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...