OFM 655 User Manual
Model 655 Vision Guest Chair
Parts Listing
A
6 Units
D
13 Units
G
Seat Plate
1 Unit
B
4 Units
E
1 Unit
C
4 Units
F
Glides
5 Units
H
Base Cylinder
1 Unit
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Insert Glides (F) into Chair Base (M). Insert Base Cylinder (H) into Chair Base (M).
Step 2: Attach Adjustable Arms (L) to Seat Cushion (K) using screws (A) and washers (D).
Tighten screws with phillips head screwdriver.
Step 3: Cover plastic Chair Back (J) with replaceable Slipcover (J), and place mount plate
through slipcover before securely zipping.
Step 4: Align mounting plate on Chair Back (I) wth pre-drilled holes under Seat Cushion (K)
and attach with 4 Bolts (C) and Washers (D), using Wrench (E) that is provided.
Step 5: Attach Seat Plate (G) to the Seat Cushion (K) with 4 Bolts (B) and washers (D),
using the Wrench (E) that is provided.
Step 6: Take entire chair frame and place Seat Plate (G) onto Base Cylinder (H), and press
down firmly to secure.
I
Chair Back
1 Unit
K
Seat Cushion
1 Unit
J
Slipcover
1 Unit
L
Adjustable Arms
2 Units
M
Chair Base
1 Unit
1
4
WEIGHT CAPACITY: 250 lbs.
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
2
A
H
M
F
E
L
5
C
D
I
G
A
D
K
E
B
D
3
6
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...