OFM 515-L User Manual
Model 515-L Sharp Executive Leather Guest Chair
Parts Listing
A
Chair Body
1 Unit
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
B
Chair Base
1 Unit
STOP
Please read all instructions before assembly.
Step 1: Attach Arm Rests (C) to Chair Body (A) with 6mm Arm Rest Screws (D).
Step 2: Attach Chair Base (B) to Chair Body (A) using 6mm Screws (E) and
6mm Washer (F).
Step 3: Cover screw holes with Arm Caps (G). Press in firmly.
C
Arm Rests
2 Units
D
6mm Arm Rest Screw
4 Units
F
6mm Washer
4 Units
E
6mm Hex Screw
4 Units
G
Arm Caps
4 Units
1
C
A
WEIGHT CAPACITY: 250 lbs.
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
06.09.2010
D
3
2
F
E
G
B
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...