Page 1
Model 503-L Leather Guest/Reception Chair
E
B
Parts Listing
A
Seat Cushion
B
Back Cushion
Assembly Instructions
Tools Needed: Phillips Head Screwdriver
STOP
Please read all instructions before assembly.
Step 1: Mount both sides of Seat Cushion (A) onto
the bottom rib of the steel frame (C), with special
coated Ni-Lock Screws (E) and tighten with screwdriver.
Step 2: Place the Back Cushion (B) onto the back rib on top
of the side Steel Frame (C), attach it with the
Hex Screws (F) and tighten with screwdriver.
D
M8 Ni-Lock
Hex Screws
8 pcs.
C
Steel Frame
with Arm
1 pair
E
6 mm Hex Screws
4 pcs.
1
WEIGHT CAPACITY: 250 lbs.
Assembly Notes:
During assembly, hand tighten screw only when all screws
are in place, you may then tighten all screws completely.
CAUTION:
1. Do not use this chair as a step ladder.
2. Check for loose screws and tighten them every 6 months.
03.24.2010
A
C
D
2
161 Tradition Trail Holly Springs, NC, 27540
800-520-7471 (voice)
919- 303-6389 (voice)
support@ofminc.com
919-362-4765 (fax)
www.ofminc.com
Loading...