OFM 5000RE User Manual

Models 5000L, 5000LE, 5000R, 5000RE Serenity Series

Parts Listing

A

Chair

1 Unit

B

Legs

4 Units

Assembly Instructions

STOP

A

B

B

No Tools Required

Models 5000LE & 5000RE
Do This Before Step 1:

Carefully lay Chair (A) onto its back and pull
open corner of lining attached with velcro on
bottom of Chair (A). Pull out electrical cord and
reattach velcro. Plug-in electrical cord or stash
cord away in pocket after Legs (B) are attached
(see Step 1).

Step 1: Attach the Legs (B) to the Chair (A) by
carefully laying the Chair (A) onto its
back and screwing the Legs (B) into the
corresponding holes in each corner of the
bottom of the chair frame and tighten by hand.

Step 2: Return Chair (A) to upright position.

WEIGHT CAPACITY: 500 lbs.

Assembly Notes:

Hand tighten legs only.

CAUTION:

1. Do not use this chair as a step ladder.

2. Check for loose legs and tighten them every 6 months.

12.12.2014

.

161 Tradition Trail
800-520-7471 (voice)
919-303-6389 (voice)
[e-mail]

Holly Springs, NC, 27540

.

919-362-4765 (fax)

.

www.ofminc.com