INSTRUCTION MANUAL
WIRELESS SPEAKER
Model: BT100
Product Specifications
Model: BT100
Officeworks Product Code: QDBT1010
Bluetooth Version: 5.0
Power Supply: USB,DC 5V, 500mA
Battery Capacity:
Battery Playtime:
Battery Charge Time:
S/N:
Frequency Response: 150Hz-18kHz
300mAh
4 hours
2-3 hours
>70dB
(50% volume)
Operation Distance: Up to 10m
3WOutput Power:
Pack Contents
1. Wireless Speaker
2. Instruction Manual
3. Micro USB Charging Cable
4. Quick-start Guide
Do not connect this cable to products
other than BT100 true wireless
earbuds. Connecting this cable to
other devices might cause damage
to both cable and the device.
Functions
1. Mode button
1 2 3 4
2. Volume down (Short press) / Previous track (Long press)
3. Volume up (Short press) / Next track (Long press)
4. Pause/Play/Hands-free (Short press)
*When you receive a call, short press the button the answer.
When the call ends, music will resume playing.
1
5
DC5V
ON/OFF
5. USB slot (for playing)
6. MicroSD card slot
(for playing)
7. Micro USB charging port
8. ON/OFF switch
6 7 8
Charging the Speaker
Before using the speaker for the first time, charge it for at
least two hours. Insert the included USB charging cable into
the micro USB charging port. Connect the other end of the
USB cable to a working USB power source.
Ensure the battery has been fully charged on the first three
initial uses to ensure the battery’s best performance.
Upon completion of charging, please unplug the charging
cable from the wireless speaker. Do not leave the wireless
speaker charging after it’s fully charged. It may shorten
the lifetime of the battery.
Powering the Speaker
1. Once fully charged, slide the ON/OFF switch to turn on the
speaker.
2. BT100 is in pairing mode after power-on.
3. To manually turn off the speaker, slide ON/OFF switch again.
2
Pairing the Speaker
Connect the speaker through Bluetooth:
1. Keep the speaker and device within 1 metre of each other.
2. Slide ON/OFF switch to turn on the speaker, the LED indicator
will blink quickly, the speaker enters pairing mode.
3. Start the Bluetooth function on your mobile device and look
for “BT100” in the Bluetooth device list (depending on the
Bluetooth version of device may have to enter password '0000')
4. After successful pairing, a prompt "Bluetooth Connected"
will be played.
5. The LED will be illuminated when music is playing.
Note:
When you turn on the wireless speaker, it will
automatically connect to the last connected device if it
still in range.
To pair a different device, you must turn off the wireless
capability of the paired device or take it out of range.
Picking up Calls
1.Press the PLAY/PAUSE button to answer an incoming
phone call.
2.Press the PLAY/PAUSE button to end call.
3.Use the volume buttons to change the volume of the call.
4.Note: Some calls need to be answered on device.
Playing Through MicroSD Card or USB
1. Insert USB to USB slot or insert MicroSD card to MicroSD
card slot, the speaker would play the music in USB or
MicroSD card automatically, these two media types have
priority over Bluetooth playback.
3
2.
Switch play mode in between Bluetooth, USB and MicroSD
by the pressing the mode button. Prompt message will be
played to confirm the success of switching of each mode.
Speaker will play media file from attached USB storage and
3.
MicroSD card upon the power is turned on (If storage
device is attached).
Troubleshooting
No Sound:
Power ON the speaker and charge the battery
Increase the volume on your speaker and Bluetooth device
Make sure you are using the correct paired device
Move your Bluetooth device closer to the speaker and away
from any interference or obstructions
Use a different music source
Check the play mode to select the attached media storage
device
Check on attached media storage for proper insertion
Distorted sound:
Decrease the volume on your speaker and Bluetooth device
Note: Hands free conversation feature allows user to remotely accept a
voice call from direct number dial in and certain instant messaging Apps
by pressing on the Play/Pause button on the speaker. Some instant
messaging Apps require user to confirm the acceptance of voice call
within the App only.
Safety and General Information
1. Do not subject the device to liquid or attempt to
disassemble the device.
2. Do not use this product in an aircraft.
3. Do not expose the device to direct sunlight, heat or flame.
4. Device may be warm while charging. It is normal.
4
Product Warranty
– Valid for Australian Customers Only
Officeworks Ltd warrants that this product will be free from defects and
work as intended for 3 years from the date of purchase by the original
customer.
If the product has any defects or does not work as specified
during the Warranty Period, Officeworks will, at its election and at its
expense, repair or replace the product.
This warranty does not apply:
• to cosmetic damage;
• to damage caused by consumables used in connection with the product ;
• where the product has not been used in accordance with all provided
instructions;
• to damage arising from fair wear and tear;
• where the product has not been subject to reasonable use;
• where the product has been intentionally or negligently damaged; and/or
• if the customer has attempted to repair the product.
To make a claim under this warranty, please return your product with your
receipt or proof of purchase to your nearest Officeworks store or contact
1300 633 423.
This warranty is provided in addition to any rights you may be entitled
to under the Competition & Consumer Act 2010. Our goods come with
guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does not amount to
a major failure.
5
Loading...