Office Star Products EX9385 Operating Instructions Manual

EX9385 LEATHER VISITORS CHAIR

OPERATING INSTRUCTIONS

WARNING

1. Use this product only one person at a time.

2. Do not use this chair unless all bolts, screws and knobs
are securely tightened.

3. Check that all bolts screws and knobs are tight every
three months or as needed.

4. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.

5. Do not use chair as a stepladder.

6. Use this chair for its intended purpose only.

7. Use mild detergent only for cleaning.

WARRANTY

Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:

• 5 Years on all non-moving metal parts.

• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.

• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in normal
use.

To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return
authorization. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory. Return freight
on components still in warranty will be paid by Office Star Products.

*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded to the
extent permitted by law. The user assumes all risk of injury resulting from use of this product.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail
parts@officestar.net, by Fax [phone], or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m.
Pacific Time.

7R

EX9385 LEATHER VISITORS CHAIR

ASSEMBLY INSTRUCTIONS

3

7L

8

66

5

2

PART QTY

5

4

1

Remove all parts from carton, separate by part numbers indicated on parts list, and verify part
quantities.
STEP 1 Attach Sled Base (1) to Seat Cushion (2) with the arrow towards the front of the chair, using four

Long Screws (4).

FULLY TIGHTEN ALL SCREWS COMPLETELY.
STEP 2 Attach Back Support (8) to Seat Cushion (2) using four Short Screws (6).
TIGHTEN ALL FOUR CREWS COMPLETELY.
STEP 3 Align the holes in the Arms (7L and 7R) with the holes on the bottom of the Seat Cushion (2). Attach

Arms (7L and 7R) to Seat Cushion (2), using three Mid-Length Screws (5) for each arm.

FULLY TIGHTEN ALL SCREWS.

1. Sled Base . . . . . . . . . . . . . . . . 1

2. Seat Cushion . . . . . . . . . . . . . . 1

3. Back Cushion . . . . . . . . . . . . . 1

4. Long Screw . . . . . . . . . . . . . . . 4

5. Mid-Length Screw . . . . . . . . . . 6

6. Short

7. Arms Left (7L) Right (7R) . . . . 2

8. Back Support . . . . . . . . . . . . . . 1

9. Allen Wrench (not shown) . . . . 1

10. Socket Wrench (not shown) . . . 1

Screw . . . . . . . . . . . . . . . 4

ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.

© Office Star Products July 2005