Office Fitness High Riser 1E Maintenance Manual
Electric Desk Adjustable
Instructions / Manual / Maintenance
SAFETY NOTICE
Failure to comply with this instruction manual may result in injury or damage of the
product.
Please keep the product far away from etchant, dust and water.
Keep children away from the Electric Height Adjustable table. There is risk of injury and
electric shock.
Please contact us when there is something wrong with the product.
WARRANTY
Our products carry a limited two years warranty on factory defects from date of delivery.
The legs and control box are not to be opened by unauthorized personnel otherwise the
warranty shall be null and void.
TECHNICAL PARAMETERS
Input Voltage: 110 - 240V AC
Output Voltage: 24VDC
Max. Load: 100 KG
Duty Cycle: Max 2 min. operate / Min. 18 min. stop
Height Adjustable Range: 60 cm - 125 cm
Operating Temperature: 0 - 40 ºC
Max Speed: 38 mm/s
PART LIST
No Description
1. Leg (qty 2)
2. Control Box
3. Height Adjuster
4. Power Cable
5. Motor Cable (qty 2)
6. Beam
7. Control Box Bracket
8. Foot (qty 2)
9. Bracket (qty 2)
10. Adjustable Feet (qty 4)
11. M6 bolt (qty 24)
12. M5 bolt (qty 4)
13. Tap screw (qty 14)
14. M6 Allen Key
15. M5 Allen Key
1
2
1
2
3
4
S
4
5
6
7
8
9
10
11
12
13
14
15
3
INSTALLATION INSTRUCTIONS
Adjust the beam to the desired length.
Beam length is variable according to
desktop size but as a guide look to
have frame at least 60% of the length
of the desktop and 70% + if desktop
needs to carry a significant load.
Tighten the hex screws located in the
beam.
Attach the arms and beams to the legs with
M6 bolts.
Attach the legs to the underside of the
beams with M6 bolts.
Attach feet to the underside of the legs.
Attach feet pads if not already secured.
Connect the legs, height adjuster and
power cable to the control box.
Attach control panel, height controller and
frame to the underside of the desktop using
tap screws. For the frame, use the guide
holes provided along the arms and beams.
1
2
4
6
3
5
Power cable
Hand Control
Control Box
Leg
1
2
3
4
S
Loading...