OEM Tools 25980 Operating Instructions Manual

Operating Instructions and Parts Manual 25980

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others
by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or
damage to product or property. Please retain instructions for future reference.

UNPACKING

After unpacking, inspect carefully for any
damage that may have occurred during
transit. Check for loose, missing, or
damaged parts. If any damage is observed,
a shipping damage claim must be filed
with carrier. Do not use the work light if
it appears damaged in any way, operates
abnormally or is missing parts.

MAX OUTPUT

Work Light Torch Light

MAX RUNTIME

Work Light Torch Light

CREE 3

W RECHARGEABLE

LITHIUM-ION POCKET LIGHT

200

LUMENS

100

LUMENS

4h

4h

WARNING

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.

The following safety information is provided as guidelines to help you operate your work light under the safest possible conditions. Any
tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed.
The following safety instructions are to provide the user with the information necessary for safe use and operation. Please read and
retain these instructions for the continued safe use of your work light. Failure to follow instructions listed below may result in serious
injury. In addition, make certain that anyone that uses the equipment understands and follows these safety instructions as well.

Thank you very much for choosing an OEMTOOLS Product!

For future reference, please complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this
product before you begin using it. We strongly recommend this work light is not modified and/or used for any application
other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
work light until you have first contacted OEMTOOLS to determine if it can or should be performed on the product.

10/15

2015 OEMTOOLS

Operating Instructions and Parts Manual 25980

CREE 3W RECHARGEABLE

LITHIUM-ION POCKET LIGHT

IMPORTANT INSTRUCTIONS
AND SAFETY RULES

1. Know your work light. Read this manual carefully. Learn the
work light’s applications and limitations, as well as, potential
hazards specific to it.

2. Keep children away. All children should be kept away from
the work area. Never let a child handle a tool without strict
adult supervision.

3. Do not use the work light if the switch does not turn it on
and off. Any tool that cannot be controlled with the switch is
dangerous and must be repaired.

4. Keep away from flammables. Do not attempt to operate this
work light near flammable materials or combustibles. Failure
to comply may cause serious injury or death.

5. Although eye damage from the OEMTOOLS Pocket Light is
unlikely, never stare directly into the beam.

6. Do not attempt to recharge the battery by any other means
than USB, via the cable provided.

7. When servicing a tool, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of injury.

8. The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations
that may occur. The operator must understand that common
sense and caution are factors which cannot be built into this
product, but must be supplied by the operator.

DISPOSAL

At the end of the useful life of the Pocket Light, dispose of the
components according to all state, federal and local regulations.

Battery Disposal

Exposure to high temperatures can cause the batteries to
explode; do not dispose of in a fire. Some countries have
regulations concerning battery disposal. Follow all applicable
regulations. Return used batteries to a collection location for
recycling.

CHARGING

Fully charge the battery before first use.

OPERATION

The OEMTOOLS Pocket Light incorporates a small compact
design and features 6 super bright LEDs. 5 SMD’s for use as an
inspection lamp and 1 ultra-bright Cree 3W LED in the top for use
as a directional light. A push On/0ff button is located on the front
of the light. A magnetic pocket clip allows user to either clip the
light to a pocket or mount to a metal surface. The Li-Ion long life
battery is rechargeable via the included USB lead.

MAINTENANCE

1. Always store the OEMTOOLS Pocket Light in a
well-protected area where it will not be exposed to
inclement weather, corrosive vapors, abrasive dust or any
other harmful elements.

2. Keep the Pocket Light clean by wiping with a
damp cloth.

3. Inspect cable periodically, and if damaged, replace.

4. Recharge periodically when not in use.

PRODUCT SPECIFICATIONS

5 SMD LED lights:

CREE 3W light:

Runtime:

Charge time:

Lightweight:

200 Lumens

100 Lumens

4 Hrs.

4 Hrs.

0.2 Lbs.

FEATURES:

• Powerful magnetic pocket clip

• On/Off button for pocket light and torch light

• Indicator lights: green when fully charged and red when
charging

• High impact, rubberized ABS case for durability

• PC Lens

• Ergonomic hand grip for comfort

10/15

2015 OEMTOOLS

2

Operating Instructions and Parts Manual 25980

CREE 3W RECHARGEABLE

LITHIUM-ION POCKET LIGHT

Figure Description

A SMD Lights

B On/Off Button

C Cree 3W Light

D Magnetic Pocket Clip

E Charging Port

USB Charging Cord (Not Shown)

NOTE

Not all components of the Pocket Light are
replacement items, but are illustrated as a
convenient reference for location and position
in the assembly sequence.

FRONT BACK

(A) SMD Lights

(C) Cree 3W Light

(B) On/Off Button

(D)

Magnetic
Pocket Clip

(E)

Charging
Port

NOTE

OEMTOOLS and/or its distributors have provided the parts list and assembly diagram as a reference only. Neither OEMTOOLS and/or its
distributors make any representation or warranty of any kind to the buyer and/or user of this tool that he or she is qualified to do any
repairs or replace any parts of this product. OEMTOOLS and its distributors expressly state that all repairs or parts replacement should
be done by certified or licensed technicians. The buyer assumes all risk and liability arising out of his or her repairs or parts replacement
to the original product.

10/15

2015 OEMTOOLS

3