OEM Tools 24418 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual 24418

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing all
safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property. Please
retain instructions for future reference.

1/2” AIR IMPACT

WRENCH

FOR CUSTOMER SERVICE

Technical Question?

CALL 1-866-458-2472

[e-mail]

UNPACKING

After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. Do not use the OEMTOOLS
Impact Wrench if broken, bent, cracked or damaged parts
(including labels) are noted. Any Impact Wrench that appears
damaged in any way, operates abnormally or is missing parts
should be removed from service immediately. If you suspect
that the Impact Wrench was subjected to shock load (a load
that was dropped suddenly, unexpectedly, etc.) immediately
discontinue use until it has been checked by a factory
authorized service center.

WARNING

The following safety information is provided as a guideline to help you operate your Impact Wrench under the safest possible conditions. Any tool or piece of
equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to
provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service
system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses the equipment understands and
follows these safety instructions as well.

Explanation of Safety Signal Words

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

CAUTION
NOTES

: Provide clarity and helpful information.

Thank you very much for choosing an OEMTOOLS Product!

For future reference, please complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin
using it. This product is designed for certain applications only. OEMTOOLS cannot be responsible for issues arising from modification. We strongly
recommend this product is not modified and/or used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted OEMTOOLS to determine if it can or should be

performed on the product.

06/16

2016 OEMTOOLS

Operating Instructions and Parts Manual 24418

1/2” AIR IMPACT

WRENCH

IMPORTANT INSTRUCTIONS
AND SAFETY RULES

1. Know your tool. Read this manual carefully. Learn the tool’s
applications and limitations, as well as, potential hazards specific
to it.

2. Keep work area clean and well lit. Cluttered or dark work areas
invite accidents.

3. Keep children away. All children should be kept away from the work
area. Never let a child handle a tool without strict adult supervision.

4. Do not operate this tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment
or reflexes are impaired while taking drugs. If there is any doubt, do
not attempt to operate.

5. Use safety equipment. Eye protection should be worn at all times
when operating this tool. Use ANSI approved safety glasses.
Everyday eyeglasses are NOT safety glasses. Dust mask, non-skid
safety shoes, hard hat or hearing protection should be used in
appropriate conditions.

6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard when
operating this tool. Keep all apparel clear of the tool.

7. Don’t overreach. Keep proper footing and balance at all times when
operating this tool.

8. Check for damage. Check your tool regularly. If part of the tool is
damaged it should be carefully inspected to make sure that it can
perform its intended function correctly. If in doubt, the part should
be repaired. Refer all servicing to a qualified technician. Consult
your dealer for advice.

9. Keep away from flammables. Do not attempt to operate this tool
near flammable materials or combustibles. Failure to comply may
cause serious injury or death.

10. Store idle tools out of the reach of children and untrained persons.
Tools may be dangerous in the hands of untrained users.

11. Maintain tools with care.

12. Keep tools dry and clean.

13. Do not use a damaged tool. Tag damaged tools “Do not use” until
repaired.

14. Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.

15. Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by unqualified personnel could
result in a risk of injury.

16. When servicing a tool, use only identical replacement parts. Use of
unauthorized parts or failure to follow maintenance instructions may
create a risk of injury.

17. Maintain a safe working environment. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Keep the
work area free of obstructions, grease, oil, trash, and other debris.
Do not use this product in a damp or wet location.

18. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact OEMTOOLS
for a replacement.

19. Before use, read and understand all warnings, safety precautions,

and instructions as outlined in the vehicle manufacturer’s service
manual. It is beyond the scope of this manual to properly describe
the correct procedure and test data for each vehicle.

20. Always perform vehicle service in a properly ventilated area. Never
run an engine without proper ventilation for its exhaust. Stop work
and take necessary steps to improve ventilation in the work area
if you develop momentary eye, nose, or throat irritation as this
indicates inadequate ventilation.

WARNING

• Disconnect from air supply before changing accessories or
servicing.

• Check correct air pressure is maintained and not exceeded.

• Due to possible presences of asbestos dust from brake linings,
when working around vehicle brake systems, we recommend you
wear suitable respiratory protection.

NOTE: The manufacturer declines any and all responsibility for damage
to vehicles or components if said damage is the result of unskillful
handling by the operator or of failure to observe the basic safety rules set
forth in the instruction manual.

WARNING

Read Rules for Safe Operation and Instructions Carefully.

IMPORTANT SAFETY INSTRUCTIONS

The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The
operator must understand that common sense and caution are factors
which cannot be built into this product, but must be supplied by the
operator.

WARNING

1. Use only attachments recommended or sold by manufacturer.

2. Do not disassemble the Impact Wrench. Take it to a qualified
professional when service or repair is required. Incorrect reassembly
may result in electric shock or fire.

3. Keep air hose away from heat, oil and sharp edges. Check air
hose for wear before each use and ensure that all connections are
secure.

4. Only use impact sockets which are specifically designed for use
with an Impact Wrench.

5. Wear approved safety eye/face shield, ear defenders and hand
protection.

6. When not in use disconnect from air supply and store in a safe dry,
childproof location.

7. DO NOT use the Impact Wrench for tasks it is not designed to
perform.

8. DO NOT carry the Impact Wrench by the air hose, or yank the hose
from the air supply.

9. DO NOT operate Impact Wrench if you are tired or under the
influence of alcohol, drugs or intoxicating medication.

10. DO NOT direct air from the tool’s exhaust at yourself or others.

06/16

2016 OEMTOOLS

2