OEM Tools 24412 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual 24412

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by
observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage
to product or property. Please retain instructions for future reference.

DIGITAL TIRE INFLATOR

FOR CUSTOMER SERVICE

Technical Question?

CALL 1-866-458-2472

[e-mail]

UNPACKING

After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing,
or damaged parts. If any damage is observed, a shipping
damage claim must be filed with carrier. Do not use Digital
Tire Inflator if broken, bent, cracked or damaged parts
(including labels) are noted. Any Digital Tire Inflator that
appears damaged in any way, operates abnormally or is
missing parts should be removed from service immediately.
If you suspect that the Digital Tire Inflator was subjected
to a shock load (a load that was dropped suddenly,
unexpectedly, etc.) immediately discontinue use until it has
been checked by a factory authorized service center.

WARNING

The following safety information is provided as a guideline to help you operate your Digital Tire Inflator under the safest possible
conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not known
or not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your tool. Failure to follow instructions listed below may result in
serious injury. In addition, make certain that anyone who uses the equipment understands and follows these safety instructions as well.

Explanation of Safety Signal Words

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result

in property damage.

NOTES: Provide clarity and helpful information.

Thank you very much for choosing an OEMTOOLS® Product!
For future reference, please register your new tool at www.oem-tools.com and complete the owner’s record below:

Model: _______________ Purchase Date: ___________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS® cannot be responsible for issues arising
from modification. We strongly recommend this product is not modified and/or used for any application other than that for which
it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted
customer service to determine if it can or should be performed on the product.

11/16

2016 OEMTOOLS

®

Operating Instructions and Parts Manual 24412

DIGITAL TIRE INFLATOR

IMPORTANT INSTRUCTIONS
AND SAFETY RULES

1. Know your tool. Read this manual carefully. Learn the tool’s
applications and limitations, as well as, potential hazards
specific to it.

2. Keep work area clean and well lit. Cluttered or dark work
areas invite accidents.

3. Keep children away. All children should be kept away from the
work area. Never let a child handle a tool without strict adult
supervision.

4. Do not operate this tool if under the influence of alcohol or
drugs. Read warning labels on prescriptions to determine if
your judgment or reflexes are impaired while taking drugs. If
there is any doubt, do not attempt to operate.

5. Use safety equipment. Eye protection should be worn at all
times when operating this tool. Use ANSI approved safety
glasses. Everyday eyeglasses are NOT safety glasses. Dust
mask, non-skid safety shoes, hard hat or hearing protection
should be used in appropriate conditions.

6. Wear proper apparel. Loose clothing, gloves, neck-ties, rings,
bracelets or other jewelry may present a potential hazard
when operating this tool. Keep all apparel clear of the tool.

7. Don’t overreach. Keep proper footing and balance at all times
when operating this tool.

8. Check for damage. Check your tool regularly. If part of the
tool is damaged it should be carefully inspected to make sure
that it can perform its intended function correctly. If in doubt,
the part should be repaired. Refer all servicing to a qualified
technician. Consult your dealer for advice.

9. Store idle tools out of the reach of children and untrained
persons. Tools may be dangerous in the hands of untrained
users.

10. Maintain tools with care.

11. Keep tools dry and clean.

12. Do not use a damaged tool. Tag damaged tools “Do not use”
until repaired.

13. Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be suitable
for one tool may become hazardous when used on another
tool.

14. Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in a risk of injury.

15. When servicing a tool, use only identical replacement parts.
Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of injury.

16. Maintain a safe working environment. Keep the work
area well lit. Make sure there is adequate surrounding
workspace. Keep the work area free of obstructions,
grease, oil, trash, and other debris. Do not use this product
in a damp or wet location.

17. Maintain labels and nameplates on this product. These carry
important information. If unreadable or missing, contact
OEMTOOLS® for a replacement.

18. Before use, read and understand all warnings, safety
precautions, and instructions as outlined in the vehicle
manufacturer’s service manual. It is beyond the scope of this
manual to properly describe the correct procedure and test
data for each vehicle.

19. Always perform vehicle service in a properly ventilated area.
Never run an engine without proper ventilation for its exhaust.
Stop work and take necessary steps to improve ventilation in
the work area if you develop momentary eye, nose, or throat
irritation as this indicates inadequate ventilation.

WARNING

• Engine parts that are in motion and unexpected movement of

a vehicle can injure or kill. When working near moving engine
parts, wear snug fit clothing and keep hands and fingers away
from moving parts. Keep hoses and tools clear of moving parts.
Always stay clear of moving engine parts. Hoses and tools can
be thrown through the air if not kept clear of moving engine
parts. The unexpected movement of a vehicle can injure or
kill. When working on vehicles always set the parking brake or
chock the wheels.

• Avoid accidental fire and/or explosion. Do not smoke near

engine fuel and battery components.

• For safety purposes and the prevention of damage to

expensive components it is advised that the user have an
understanding of basic automotive repair and a working
knowledge of automotive systems.

• We believe the information contained herein to be

reliable. However, general technical information is given
by us without charge and the user shall employ such
information at his own discretion and risk. We assume no
responsibility for results or damages incurred from the
use of such information in whole or in part. Always refer
to specific instructions and technical information supplied
by vehicle manufacturer.

NOTE: The manufacturer declines any and all responsibility for
damage to vehicles or components if said damage is the result
of unskillful handling by the operator or of failure to observe the
basic safety rules set forth in the instruction manual.

WARNING

Read Rules for Safe Operation and Instructions Carefully.

IMPORTANT SAFETY INSTRUCTIONS

The warnings, precautions, and instructions discussed in this
manual cannot cover all possible conditions and situations that
may occur. The operator must understand that common sense
and caution are factors which cannot be built into this product, but
must be supplied by the operator.

DISPOSAL

At the end of the useful life of the Digital Tire Inflator, dispose
of the components according to all state, federal and local
regulations.

11/16

2016 OEMTOOLS

®

2