OEL Worldwide Industries Combination Wrenches Catalog Page

Combination Wrenches

OEL PART# DESCRIPTION

COMBINATION WRENCHES

1108 WRENCH OPEN 5/16” & 8mm $45.00
1109
1110
1111
1112
1113
1114

1115
1116
1117

1118
1119

1120
1122
1124
1126
1130 WRENCH OPEN 1-3/16” & 29/30mm $116.00
1132 WRENCH OPEN 1-1/4” & 32mm $130.00

1108B
1109B
1110B

1111B

1112B

1113B

1114B

1115B

1116B

1117B

1118B

1119B

1120B

1122B

1124B

1126B

1130B

1132B

WRENCH OPEN 9/16” & 14mm $52.00

WRENCH OPEN 3/4” & 19mm $60.00

WRENCH BOXED 15/32” & 12mm $48.00

WRENCH BOXED 7/8” & 22/23mm $72.00

WRENCH OPEN 11/32” & 9mm
WRENCH OPEN 3/8” & 10mm
WRENCH OPEN 7/16” & 11mm
WRENCH OPEN 15/32” & 12mm
WRENCH OPEN 1/2” & 13mm

WRENCH OPEN 19/21” & 15mm
WRENCH OPEN 5/8” & 16mm
WRENCH OPEN 11/16” & 17mm

WRENCH OPEN 23/32” & 18mm

WRENCH OPEN 13/16” & 20/21mm
WRENCH OPEN 7/8” & 22/23mm
WRENCH OPEN 15/16” & 24mm
WRENCH OPEN 1-1/16” & 26/27mm

WRENCH BOXED 5/16” & 8mm
WRENCH BOXED 11/32” & 9mm
WRENCH BOXED 3/8” & 10mm

WRENCH BOXED 7/16” & 11mm

WRENCH BOXED 1/2” & 13mm

WRENCH BOXED 9/16” & 14mm

WRENCH BOXED 19/21” & 15mm

WRENCH BOXED 5/8” & 16mm

WRENCH BOXED 11/16” & 17mm

WRENCH BOXED 23/32” & 18mm

WRENCH BOXED 3/4” & 19mm

WRENCH BOXED 13/16” & 20/21mm

WRENCH BOXED 15/16” & 24mm

WRENCH BOXED 1-1/16” & 26/27mm

WRENCH BOXED 1-3/16” & 29/30mm

WRENCH BOXED 1-1/4” & 32mm

$46.00
$46.40
$48.00
$48.00
$52.00

$52.00
$55.00
$55.00

$55.00

$66.00
$72.00
$82.00
$112.00

$45.00
$46.00
$46.40

$48.00

$52.00

$52.00

$52.00

$55.00

$55.00

$55.00

$60.00

$66.00

$82.00

$112.00

$116.00

$130.00

39

Information

COMBINATION TOOLS:

TORQUE LOADING

• THESE TOOLS WERE DESIGNED TO PROVIDE A GREATER AREA OF FORCE APPLICATION, COMPARED

WITH THAT APPLIED BY CONVENTIONAL TOOLS.

• THESE TOOLS, IN DISTRIBUTING THE TORQUE LOAD TO THE FASTENER THROUGH THE FLATS, DO

NOT ONLY ACHIEVE A GREATER FORCE, BUT ALSO LOWER THE POSSIBILITY OF DISTORTION TO THE
NUT OR BOLT HEAD.

• HAVING A THIN WALL IS AN ADVANTAGE IN EVERY SOCKET. WE CAN AFFORD TO PROVIDE SUCH A

WALL, BECAUSE WITH OUR SPANNERS AND SOCKETS THE FORCE IS ABSORBED WHERE THE WALL HAS
IT’ S GREATEST STRENGTH.

• THESE SOCKETS ARE CAPABLE OF EXCEEDING THE TIGHTENING TORQUES SPECIFIED IN THE DIN

STANDARD BY 70 TO 100%, DEPENDING ON THE SOCKET SIZE.

EFFICIENCY

• BECAUSE WITH THIS TOOL SYSTEM EACH SOCKET OR SPANNER FITS BOTH A METRIC AND INCH

SERIES FASTENER, FEWER TOOLS ARE REQUIRED TO PERFORM A RANGE OF OPERATIONS.

• ONE OF THE MOST IMPORTANT FEATURES OF OUR TOOLS IS THE WALL DRIVE PRINCIPLE OF

APPLYING PRESSURE TO FLATS OF A NUT OR BOLT MAKING IT VIRTUALLY IMPOSSIBLE TO DAMAGE A
FASTENER IN A WORK SITUATION.

• FEWER TOOLS MEANS LESS COST, LESS INVENTORY, AND LESS WEIGHT IN AN OPERATOR’S TOOL BOX.

• AS AN ADDED BONUS THE WALL DRIVE PRINCIPLE OF APPLYING PRESSURE TO FLATS OF A NUT OR

BOLT MAKES IT VIRTUALLY IMPOSSIBLE TO DAMAGE A FASTENER IN A WORK SITUATION.

WHY OEL COMBINATION TOOLS?

1. GET MORE USE OUT OF FEWER TOOLS

ONE SET OF TOOLS DOES THE JOB OF BOTH METRIC AND STANDARD, PLUS WORKS ON DAMAGED
FAsTENERS TOO.

2. SUPERIOR, NO SLIP HOLD!
NO SLIPPING MEANS GREATER SAFETY. NO MORE CUT HANDS, BANGED UP KNUCKLES AND ELBOWS
DUE TO WRENCH SLIPPAGE.

3. COMPACT!

YOU’ LL CARRY FEWER TOOLS, HAVE A LIGHTER TOOL BOX, AND YOU’ LL HAVE A MUCH EASIER TIME
FINDING EXACTLY THE TOOL YOU NEED.

4. SAVES TIME! ADDS EFFICIENCY!

ELIMINATE SWITCHING BACK AND FORTH FROM STANDARD TO METRIC. ONE TOOL SET IS ALL YOU’ LL
NEED! SAVE NEEDLESS TIME SPENT SEARCHING THROUGH TOOLS.

40